...
首页> 外文期刊>Polymer: The International Journal for the Science and Technology of Polymers >Shear-induced pre-crystallization structures of long chain branched polypropylene under steady shear flow near the melting temperature
【24h】

Shear-induced pre-crystallization structures of long chain branched polypropylene under steady shear flow near the melting temperature

机译:熔融温度附近稳定剪切流下长支链聚丙烯的剪切诱导预结晶结构

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Shear-induced crystallization of a long chain hyper-branched polypropylene (LCB-PP, denoted PP-3) was carried out at a relatively high temperature of 170 °C, close to its melting temperature of 158 °C. Small-angle X-ray scattering (SAXS) showed that the intensity ratio of the normal to the perpendicular to the shear (V/H) was always larger than 1 for PP-3, indicating that shish-like structures were predominately formed and further growth to kebab was suppressed in PP-3. The crystallization behavior of PP-3 can be explained by the nature of PP-3 that there were a large amount of crystallization nuclei due to their branching points, and the point-like precursors formed from these nuclei were arrayed linearly along the shear direction and transformed into thread-like precursors or premature shishs; however, owing to the large amount of branching, further progress in crystallization was suppressed.
机译:长链超支化聚丙烯(LCB-PP,表示为PP-3)的剪切诱导结晶是在170°C的相对较高温度(接近158°C的熔融温度)下进行的。小角度X射线散射(SAXS)表明,对于PP-3,法线与垂直于剪切力的强度比(V / H)始终大于1,这表明主要形成了像油的结构,并且进一步PP-3抑制了烤肉串的生长。 PP-3的结晶行为可以用PP-3的性质来解释,即由于它们的分支点而存在大量的结晶核,并且由这些核形成的点状前体沿着剪切方向线性排列,并且转变成线状前体或过早的光泽;然而,由于大量的支化,结晶的进一步进展受到抑制。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号