...
首页> 外文期刊>Scripta materialia >Age hardening in (Ti1-xAlx)B2+Delta thin films
【24h】

Age hardening in (Ti1-xAlx)B2+Delta thin films

机译:(Ti1-xAlx)B2 + Delta薄膜的时效硬化

获取原文
获取原文并翻译 | 示例
           

摘要

Thin films of (Ti0.71Al0.29)B2+1.08 have been deposited by magnetron sputtering. Post-deposition annealing at 1000 degrees C for 1 h results in increased hardness and elastic modulus, from 32 to 37 GPa and from 436 to 461 GPa, respectively. In both as-deposited and annealed states the films adhere well to the substrate, indicating no considerable internal stress. The initial high hardness is attributed to a columnar microstructure consisting of crystalline (Ti,Al)B-2 columns separated by an amorphous B matrix. The observed age hardening corresponds to phase separation within the (Ti,Al)B-2 columns including the formation of Ti-deficient crystallites within the grain interior upon annealing. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
机译:(Ti0.71Al0.29)B2 + 1.08的薄膜已通过磁控溅射沉积。在1000摄氏度下进行1h的沉积后退火,可将硬度和弹性模量分别从32 GPa和37 GPa提高到436 G461和461 GPa。在沉积状态和退火状态下,薄膜均能很好地粘附在基板上,表明没有明显的内部应力。最初的高硬度归因于由无定形B基质分隔的结晶(Ti,Al)B-2柱组成的柱状微观结构。观察到的时效硬化对应于(Ti,Al)B-2柱内的相分离,包括退火时晶粒内部形成的Ti缺陷微晶。 (C)2016 Acta Materialia Inc.,由Elsevier Ltd.发行。保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号