...
【24h】

A linearly polarized 1123 nm Nd:YAG laser using a Fabry-Perot filter as output mirror

机译:使用Fabry-Perot滤光片作为输出镜的线性偏振1123 nm Nd:YAG激光器

获取原文
获取原文并翻译 | 示例

摘要

We propose and demonstrate an 1123 nm Nd:YAG laser by exploiting a dielectric Fabry-Perot band-pass filter as laser output mirror. A fiber-pigtailed 808 nm laser diode array is used to pump an < 111 > -cut Nd:YAG crystal with a plano-plane resonator cavity. The dielectric Fabry-Perot filter as output mirror is specially designed to suppress the strong emission around 1064 nm and facilitate the oscillation of 1123 nm weak emission. A linearly polarized 1122.5 nm laser is achieved. The maximum output power of the laser is 105 mW and the slope conversion efficiency is 4.58% with the threshold pump power of 2.9 W. Passively Q-switched 1123 nm laser is realized using a [100]-cut Cr:YAG crystal as Q-switch. FWHM pulse width of 121 ns and pulse repetition rate of 2.3 kHz is achieved at pump power of 5.3 W. The design principle of the Fabry-Perot filter used as output mirror is discussed and the advantages of the method are summarized.
机译:我们通过利用电介质法布里-珀罗带通滤光片作为激光输出镜,提出并演示了1123 nm Nd:YAG激光器。光纤尾纤808 nm激光二极管阵列用于泵浦<111>切割的Nd:YAG晶体和平面谐振腔。介质Fabry-Perot滤光片作为输出镜,经过专门设计,可抑制1064 nm附近的强发射并促进1123 nm弱发射的振荡。实现了线性偏振1122.5 nm激光。激光器的最大输出功率为105 mW,斜率转换效率为4.58%,阈值泵浦功率为2.9W。使用[100]切割的Cr:YAG晶体作为Q-,实现了被动调Q开关1123 nm激光器。开关。在5.3 W的泵浦功率下实现了121 ns的FWHM脉冲宽度和2.3 kHz的脉冲重复频率。讨论了用作输出镜的Fabry-Perot滤波器的设计原理,并总结了该方法的优点。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号