A more reliable measurement method for metal/graphene contact resistance

摘要

The contact resistance of metal/graphene is becoming a major limiting factor for graphene devices. Among various kinds of contact resistance test methods, the transmission line model is the most common approach to extract contact resistance in graphene devices. However, experiments show that in some cases there exists large inaccuracy and instability using this method. In this study, we added a cross-bridge structure at the terminal of the transmission line as a supporting test. This modified transmission line measurement structure can easily compare not only the transmission line and Kelvin contact resistance, getting a more reliable value, but also the other contact-related parameters, such as specific contact resistivity, transfer length and the graphene sheet resistance under and outside contact metal at the same time. The new measurement test is very helpful in enabling us to study the contact property accurately. The specific contact resistivity in our experiment is in the range of 2.0 x 10(-6) Omega . cm(2) and 3.0 x 10(-6) Omega . cm(2) at room temperature. With the temperature decreasing from 290 K to 60 K, the transfer length fluctuates around 1.7 mu m, and the specific contact resistivity reduces to less than 2.0 x 10(-6) Omega . cm(2).