...
【24h】

N-rich salts of 2-methyl-5-nitraminotetrazole: Secondary explosives with low sensitivities

机译:2-甲基-5-硝基氨基四唑的富氮盐:敏感性低的二次炸药

获取原文
获取原文并翻译 | 示例
           

摘要

2-Methyl-5-nitraminotetrazole (1) was formed by nitration of 2-methyl-5-aminotetrazole. 2-Methyl-5-aminotetrazole was obtained by an improved synthesis starting from sodium 5-aminotetrazolate, which is methylated with dimethyl sulfate in dimethyl formamide giving 2-methyl-5-aminotetrazole in 29% yield. Nitrogen-rich salts such as guanidinium (2), 1-aminoguanidinium (3), 1,3-diamino-guanidinium (4), 1,3,5-triamino-guanidinium (5), azidoformamidinium (6), hydrazinium (7), diaminouronium 2-methyl-5-nitraminotetrazolate (8), as well as an urea adduct (9), were prepared by facile deprotonation or metathesis reactions. Diaminourea was synthesized by hydrazinolysis of dimethyl carbonate with hydrazine hydrate. All compounds were fully characterized by vibrational spectroscopy (IR and Raman), multinuclear NMR spectroscopy, elemental analysis, and differential scanning calorimetry (DSC) measurements. The crystal structures of 2-6, 8, and 9 could be determined using single crystal X-ray diffraction. The heats of formation of 2-9 were calculated using the atomization method based on CBS-4M enthalpies. With these values and the experimental (X-ray) densities several detonation parameters such as the detonation pressure, velocity, energy, and temperature were computed using the EXPLO5 code. In addition, the sensitivities toward impact, friction, and electrical discharge were tested using the BAM drop hammer, BAM friction tester, as well as a small scale electrical discharge device.
机译:通过2-甲基-5-氨基四唑的硝化反应形成2-甲基-5-硝基氨基四唑(1)。通过改进的合成方法,从5-氨基四唑酸钠开始合成2-甲基-5-氨基四唑,将其用硫酸二甲酯在二甲基甲酰胺中甲基化,以29%的收率得到2-甲基-5-氨基四唑。富氮盐,例如胍盐(2),1-氨基胍盐(3),1,3-二氨基胍盐(4),1,3,5-三氨基胍盐(5),叠氮基ami鎓(6),肼基盐(7) ),通过容易的去质子化或易位反应制备了二氨基脲2-甲基-5-硝基氨基四唑酸酯(8)以及尿素加合物(9)。通过将碳酸二甲酯与水合肼肼解来合成二氨基脲。所有化合物均通过振动光谱(IR和拉曼光谱),多核NMR光谱,元素分析和差示扫描量热法(DSC)进行了全面表征。可以使用单晶X射线衍射确定2-6、8和9的晶体结构。使用基于CBS-4M焓的雾化方法计算2-9的形成热。利用这些值和实验(X射线)密度,使用EXPLO5代码计算了几个爆轰参数,例如爆轰压力,速度,能量和温度。此外,使用BAM落锤,BAM摩擦测试仪以及小型放电装置测试了对冲击,摩擦和放电的敏感性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号