Dual band sensitivity enhancements of a VOx microbolometer array using a patterned gold black absorber

摘要

Infrared-absorbing gold black has been selectively patterned onto the active surfaces of a vanadium-oxide-based infrared bolometer array. Patterning by metal lift-off relies on protection of the fragile gold black with an evaporated oxide, which preserves much of gold black's high absorptance. This patterned gold black also survives the dry-etch removal of the sacrificial polyimide used to fabricate the air-bridge bolometers. For our fabricated devices, infrared responsivity is improved 22% in the long-wave IR and 70% in the mid-wave IR by the gold black coating, with no significant change in detector noise, using a 300 degrees C blackbody and 80 Hz chopping rate. The increase in the time constant caused by the additional mass of gold black is similar to 15%. (C) 2016 Optical Society of America