首页> 外文期刊>Applied optics >Silver jewelry microanalysis with dual-pulse laser-induced breakdown spectroscopy: 266 + 1064 nm wavelength combination
【24h】

Silver jewelry microanalysis with dual-pulse laser-induced breakdown spectroscopy: 266 + 1064 nm wavelength combination

机译:双脉冲激光诱导击穿光谱的银首饰微分析:266 + 1064 nm波长组合

获取原文
获取原文并翻译 | 示例
       

摘要

Orthogonal dual-wavelength dual-pulse laser-induced breakdown spectroscopy (ODWDP-LIBS) with 266 + 1064 nm wavelength combination was applied to realize silver jewelry microanalysis with enhanced sensitivity and minimal sample ablation. In this technique, the 266 nm laser with low pulse energy was selected as ablation laser and the time-delayed 1064 nm laser with moderate pulse energy was selected as reheating laser to enhance plasma emission. Significant signal enhancement was achieved under the excitation of the reheating laser without increasing mass ablation which was only determined by the ablation laser. Internal standard method was applied to realize quantitative analysis of copper impurity in silver jewelry samples. The calibration curve was built, and the limit of detection of copper in silver matrix was determined to be 37.4 ppm when the crater diameter was controlled at 6.5 μm. This technique is especially useful for microanalysis of precious samples due to the property of less sample ablation in comparison with single-pulse laser-induced breakdown spectroscopy (SP-LIBS) under the same analytical sensitivity.
机译:采用波长为266 + 1064 nm的正交双波长双脉冲激光诱导击穿光谱(ODWDP-LIBS)来实现具有更高灵敏度和最小样品消融的银珠宝首饰微分析。在该技术中,选择具有低脉冲能量的266 nm激光器作为消融激光器,并选择具有中等脉冲能量的延时1064 nm激光器作为再加热激光器以增强等离子体发射。在再加热激光器的激励下实现了明显的信号增强,而没有增加仅由消融激光器确定的质量消融。采用内标法对银饰品样品中的铜杂质进行定量分析。建立校准曲线,并且当将火山口直径控制在6.5μm时,测定银基质中铜的检出限为37.4 ppm。与单脉冲激光诱导击穿光谱法(SP-LIBS)相比,在相同的分析灵敏度下,该技术具有较少的样品消融特性,因此该技术对于珍贵样品的微分析特别有用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号