...
首页> 外文期刊>Chemical Physics Letters >Effects of N ion energy on titanium nitride films deposited by ion assisted filtered cathodic vacuum arc
【24h】

Effects of N ion energy on titanium nitride films deposited by ion assisted filtered cathodic vacuum arc

机译:N离子能量对离子辅助滤波阴极真空电弧沉积氮化钛膜的影响

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Titanium nitride (TiN) films were synthesized at ambient temperature on (1 0 0) silicon substrates by a filtered vacuum cathodic arc source and simultaneous bombardment from nitrogen ion beam. The effects of N ion energy on the film morphology, composition, microstructure, resistivity and mechanical properties were systematically investigated. With increasing N ion energy, the film was initially composed of many small spiky grains separated by deep boundaries, and then of many domed grains isolated by shallow boundaries, and finally of far smaller and much more spiky grains with the deepest boundaries. The chemical composition did not vary much with the ion energy. Increasing N ion energy also resulted in the change of the film phase composition and texture, where the competition between the strain energy and the stopping energy determined the film orientation. As the ion energy increased, the film resistivity increased while the film hardness decreased. The films possessed adhesion property independent of N ion energy and superior to that of the films deposited by magnetron sputtering. Some explanation will be given in detail. (C) 2003 Elsevier Science B.V. All rights reserved. [References: 41]
机译:在室温下,通过过滤的真空阴极电弧源并同时从氮离子束轰击,在(1 0 0)硅基板上合成氮化钛(TiN)膜。系统地研究了氮离子能量对薄膜形貌,组成,微观结构,电阻率和力学性能的影响。随着N离子能量的增加,薄膜最初由被深边界隔开的许多小的刺状颗粒组成,然后由被浅边界隔开的许多半球形颗粒组成,最后是由具有最深边界的小得多的刺状颗粒组成。化学组成随离子能量变化不大。 N离子能量的增加也导致了薄膜相组成和织构的变化,其中应变能和停止能之间的竞争决定了薄膜的取向。随着离子能量的增加,膜电阻率增加,而膜硬度降低。该膜具有与N离子能量无关的粘附性,并且优于磁控溅射沉积的膜。将给出一些详细解释。 (C)2003 Elsevier Science B.V.保留所有权利。 [参考:41]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号