...
首页> 外文期刊>Biomacromolecules >Ultrastrong and High Gas-Barrier Nanocellulose/Clay-Layered Composites
【24h】

Ultrastrong and High Gas-Barrier Nanocellulose/Clay-Layered Composites

机译:超强和高阻气纳米纤维素/粘土层状复合材料

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Nanocellulose/montmoriUonite (MTM) composite films were prepared from 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized cellulose nanofibrils (TOCNs) with an aspect ratio of >200 dispersed in water with MTM nanoplatelets. The composite films were transparent and flexible and showed ultrahigh mechanical and oxygen barrier properties through the nanolayered structures, which were formed by compositing the anionic MTMnanoplatelet filler in anionic and highly crystalline TOCN matrix. A composite film with 5% MTM content had Young's modulus 18 GPa, tensile strength 509 MPa, work of fracture of 25.6 MJ m~(-3), and oxygen permeability 0.006 mL fittt. m~(-2) day~(-1) kPa~(-1) at 0% relative humidity, respectively, despite having a low density of 1.99 g cm~(-3). As the MTM content in the TOCN/ MTM composites was increased to 50%, light transmittance, tensile strength, and elongation at break decreased, while Young's modulus was almost unchanged and oxygen barrier property was further improved to 0.0008 mL μrn m~(-2) day~(-1) kPa~(-1).
机译:纳米纤维素/蒙脱石(MTM)复合薄膜是由2,2,6,6-四甲基哌啶-1-氧基(TEMPO)氧化的纤维素纳米原纤维(TOCN)制成的,纵横比> 200,分散在水中并带有MTM纳米片。该复合膜是透明且柔性的,并且通过纳米层结构表现出超高的机械和氧气阻隔性能,该纳米层结构是通过将阴离子MTMnanoplatelet填料复合在阴离子和高度结晶的TOCN基质中而形成的。 MTM含量为5%的复合薄膜的杨氏模量为18 GPa,拉伸强度为509 MPa,断裂功为25.6 MJ m〜(-3),透氧率为0.006 mL fittt。尽管相对湿度为1.99 g cm〜(-3),但相对湿度分别为0%时的m〜(-2)天〜(-1)kPa〜(-1)。随着TOCN / MTM复合材料中MTM含量增加到50%,透光率,拉伸强度和断裂伸长率降低,而杨氏模量几乎不变,并且氧气阻隔性能进一步提高至0.0008 mLμmm((-2)天〜(-1)kPa〜(-1)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号