...
首页> 外文期刊>Colloids and Surfaces, A. Physicochemical and Engineering Aspects >Equilibrium leach tests: colloid generation and the association of radionuclides with colloids under simulated repository conditions
【24h】

Equilibrium leach tests: colloid generation and the association of radionuclides with colloids under simulated repository conditions

机译:平衡浸出测试:胶体的产生以及模拟库条件下放射性核素与胶体的缔合

获取原文
获取原文并翻译 | 示例
           

摘要

Equilibrium leach tests (ELTs) are designed to simulate the situation in a radioactive waste repository after groundwater has penetrated the engineered barriers (i.e. the vault backfill, the waste containers and the waste-form). Two ELTs using real intermediate level waste were assembled and operated for nearly 7 years. In these tests, the principal near-field components (waste, encapsulation matrix, container and backfill) were equilibrated with the aqueous phase under static conditions to simulate the low flow rate in a repository. The principal objective of the tests was to measure the resulting solution concentrations of key radionuclides. In addition, the tests provided a unique opportunity to investigate the formation of colloids and the association of radionuclides with colloids under simulated repository conditions. Colloid populations in leachates and fines samples from the tests have been characterised by high-resolution scanning electron microscopy (SEM). The colloid concentrations in the 0.1-5.0 mum filtered fraction of the equilibrium leachate at the end of each test are estimated to be about 10(10) dm(-3). The predominant particles are composed of calcium carbonate, a major component of the backfill. Very low alpha-activity is associated with the colloidal phase. Results of SEM/X-ray analysis suggest that the uranium is associated with the colloidal phase predominantly by sorption. (C) 2002 Elsevier Science B.V. All rights reserved. [References: 15]
机译:平衡浸出测试(ELT)旨在模拟地下水渗入工程屏障(即金库回填,废物容器和废物形态)后放射性废物储存库中的情况。组装了使用实际中级废物的两个ELT,并运行了将近7年。在这些测试中,主要的近场成分(废物,封装基质,容器和回填物)在静态条件下与水相平衡,以模拟储存库中的低流速。测试的主要目的是测量关键放射性核素的溶液浓度。此外,这些测试为研究胶体的形成以及放射性核素与胶体在模拟储存条件下的缔合提供了独特的机会。测试中的沥滤液和细粉样品中的胶体数量已通过高分辨率扫描电子显微镜(SEM)进行了表征。在每个测试结束时,在平衡浸出液的0.1-5.0微米滤过级分中的胶体浓度估计约为10(10)dm(-3)。主要颗粒由碳酸钙(回填的主要成分)组成。极低的α活性与胶体相相关。 SEM / X射线分析的结果表明,铀主要通过吸附与胶体相相关。 (C)2002 Elsevier Science B.V.保留所有权利。 [参考:15]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号