首页> 外文期刊>Colloids and Surfaces, A. Physicochemical and Engineering Aspects >Flocculation of kaolin particles by two typical polyelectrolytes: A comparative study on the kinetics and floc structures
【24h】

Flocculation of kaolin particles by two typical polyelectrolytes: A comparative study on the kinetics and floc structures

机译:两种典型的聚电解质对高岭土颗粒的絮凝:动力学和絮凝结构的比较研究

获取原文
获取原文并翻译 | 示例
       

摘要

The flocculation kinetics of kaolin particles induced by two polyelectrolytes is studied by using small-angle laser light scattering (SALLS). Two different methods, image analysis and SALLS, are used to calculated the fractal dimensions of flocs formed under different flocculation mechanisms. For a high charge density of polydiallyldimethylammoniurn chloride (PDADMAC), the initially flocculation rates are slow due to the quite low molecular weight. Smaller and more compact flocs are in the particle-particle connections, and restructuring of the flocs occurs in the flocculation process. With cationic polyacrylamide C498 of very high molecular weight and low charge density, however, the initially flocculation rates are much higher due to its rapid adsorption on kaolin particles, but it will take the adsorbed polymer a much longer time to reach equilibrium due to re-conformation. High potentialities of adsorption prevent the particles from entering the interior of the floc structure or rearrangement, which results in a more open floc structure. Different underlying flocculation mechanisms are evident for these two kinds of polyclectrolytes, in which charge neutralization is mainly involved for the low molecular weight and high charge density polymer of PDADMAC while polymer bridging is suggested to be the dominant mechanism for the high molecular weight polyelectrolyte of C498. (c) 2006 Elsevier B.V. All rights reserved.
机译:利用小角度激光散射(SALLS)研究了两种聚电解质引起的高岭土颗粒的絮凝动力学。图像分析和SALLS两种不同的方法用于计算在不同絮凝机制下形成的絮凝物的分形维数。对于聚二烯丙基二甲基氯化铵(PDADMAC)的高电荷密度,由于分子量非常低,最初的絮凝速率很慢。较小的和更紧密的絮凝物处于颗粒-颗粒连接中,絮凝物的重组发生在絮凝过程中。但是,由于阳离子聚丙烯酰胺C498具有很高的分子量和较低的电荷密度,由于其在高岭土颗粒上的快速吸附作用,其最初的絮凝速率要高得多,但由于重新吸附,其吸附聚合物需要更长的时间才能达到平衡。构象。高吸附潜力可防止颗粒进入絮凝结构内部或重新排列,从而导致絮凝结构更开放。两种聚电解质都有不同的潜在絮凝机理,其中电荷中和主要涉及PDADMAC的低分子量和高电荷密度聚合物,而聚合物桥接被认为是C498高分子量聚电解质的主要机理。 。 (c)2006 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号