首页> 外文期刊>Colloids and Surfaces, A. Physicochemical and Engineering Aspects >Role of polymer-surfactant interactions in foams: Effects of pH and surfactant head group for cationic polyvinylamine and anionic surfactants
【24h】

Role of polymer-surfactant interactions in foams: Effects of pH and surfactant head group for cationic polyvinylamine and anionic surfactants

机译:聚合物-表面活性剂相互作用在泡沫中的作用:pH和表面活性剂头基对阳离子聚乙烯胺和阴离子表面活性剂的影响

获取原文
获取原文并翻译 | 示例
       

摘要

In a previous study (Langmuir, 28 (2012) 4996) we showed that the foamability of mixed solutions of the cationic polymer polyvinylamine (PVAm) and the anionic surfactant sodium dodecyl sulphate (SDS) is strongly reduced, whereas the stability of the formed foams is strongly enhanced, as compared to the solutions of SDS alone. Here we study in more detail the foaming properties of mixed solutions of PVAm with anionic surfactants. The effect of surfactant head group is studied by comparing SDS with another anionic surfactant (sodium dodecyl oxyethylene sulphate, SDP1S) which contains an additional ethoxy fragment in the charged head-group. For changing the electrostatic polymer-surfactant interactions, we varied pH between 6 and 10, thus crossing the polymer p. Ka ? 8.6. The foam tests showed that the foamability of all mixed solutions is strongly reduced in the entire range of pH values studied. The negative effect of PVAm on solution foamability is highest at low pH, where the polymer charge density is the highest. Model experiments revealed that the reduced foamability is due to prolonged lag-time for formation of mixed adsorption layer on bubble surfaces. Surprisingly, we found that the stability of SDP1S foams is also reduced strongly by PVAm at pH 6 (contrary to SDS and to conventional understanding). The obtained results indicate that the ethoxy group in SDP1S enhances the surfactant association with the polymer molecules, thus decreasing the concentration of free surfactant monomers, necessary to adsorb on the solution surface for foam stabilization during foaming and immediately after it. These results clearly demonstrate that excessively strong polymer-surfactant interactions could be a problem in the formation and stabilization of foams from mixed solutions. Moreover, the effect of cationic polymers on the foaming properties of anionic surfactants could depend significantly on the specific head group of the surfactant.
机译:在先前的研究中(Langmuir,28(2012)4996),我们发现阳离子聚合物聚乙烯胺(PVAm)和阴离子表面活性剂十二烷基硫酸钠(SDS)的混合溶液的起泡性大大降低,而形成的泡沫的稳定性与单独使用SDS的解决方案相比,它得到了极大的增强。在这里,我们将更详细地研究PVAm与阴离子表面活性剂混合溶液的发泡性能。通过将SDS与另一种阴离子表面活性剂(十二烷基氧基亚乙基硫酸钠,SDP1S)进行比较,研究了表面活性剂头基的作用,该阴离子表面活性剂在带电的头基中包含一个附加的乙氧基片段。为了改变静电聚合物与表面活性剂的相互作用,我们在6至10之间改变pH,从而越过聚合物p。 K a ? 8.6。泡沫试验表明,在研究的整个pH值范围内,所有混合溶液的起泡性均大大降低。在低pH值(聚合物电荷密度最高)的情况下,PVAm对溶液起泡性的负面影响最大。模型实验表明,发泡性降低是由于在气泡表面形成混合吸附层的滞后时间延长所致。出乎意料的是,我们发现在pH 6时,PVAm也严重降低了SDP1S泡沫的稳定性(与SDS和常规理解相反)。所获得的结果表明,SDP1S中的乙氧基增强了表面活性剂与聚合物分子的缔合,从而降低了游离表面活性剂单体的浓度,该游离表面活性剂单体是在发泡过程中以及紧随其后吸附在溶液表面以稳定泡沫所必需的。这些结果清楚地表明,过强的聚合物-表面活性剂相互作用可能是由混合溶液形成和稳定泡沫的问题。此外,阳离子聚合物对阴离子表面活性剂发泡性能的影响可能很大程度上取决于表面活性剂的特定头基。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号