...
首页> 外文期刊>Journal of the European Ceramic Society >Preparation and magnetoelectric properties of NiFe_2O_4-PZT composites obtained in-situ by gel-combustion method
【24h】

Preparation and magnetoelectric properties of NiFe_2O_4-PZT composites obtained in-situ by gel-combustion method

机译:凝胶燃烧法原位制备NiFe_2O_4-PZT复合材料及其磁电性能

获取原文
获取原文并翻译 | 示例

摘要

Magnetoelectric composites of xNiFe_2O_4-(l - x)Pb(Zr,Ti)O_3 with x=2, 5, 10, 20, 30% were prepared by citrate-nitrate combustion using PZT-based template powders. In order to ensure a better connectivity of dissimilar phases, we have used chemical methods for preparation in situ composites, followed by adequate sintering procedure. The structural, microstructural and functional properties of di-phase magnetoelectric composites of NiFe_2O_4-PZT are reported. The XRD analysis is demonstrating the synthesis of pure ferrite phase directly on the ferroelectric templates. An excellent mixing was obtained in the composite powders, as proved by a detailed SEM analysis. The magnetic and dielectric behaviors of the ceramic composites vary with the ratio of the two phases. The dielectric behavior is greatly influenced by the magnetic phase. The magnetoelectric (ME) coefficient was measured as a function of applied DC magnetic field. The maximum ME coefficient (dE/dH) varies from 0.0011 mV/(cm Oe) to 0.5 mV/(cm Oe) with increasing of NF addition.
机译:使用基于PZT的模板粉末通过柠檬酸-硝酸盐燃烧来制备x = 2、5、10、20、30%的xNiFe_2O_4-(1-x)Pb(Zr,Ti)O_3的磁电复合材料。为了确保不同相之间更好的连通性,我们使用化学方法制备原位复合材料,然后进行适当的烧结程序。报道了NiFe_2O_4-PZT双相磁电复合材料的结构,微观结构和功能特性。 XRD分析证明了直接在铁电模板上合成纯铁氧体相。详细的SEM分析证明,在复合粉末中获得了极好的混合。陶瓷复合材料的磁和介电性能随两相之比而变化。介电性能受磁相的影响很大。磁电(ME)系数被测量为所施加的直流磁场的函数。随着NF添加量的增加,最大ME系数(dE / dH)从0.0011 mV /(cm Oe)到0.5 mV /(cm Oe)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号