...
首页> 外文期刊>Journal of the European Ceramic Society >Elastic behaviour of zirconium titanate-zirconia bulk composite materials at room and high temperature
【24h】

Elastic behaviour of zirconium titanate-zirconia bulk composite materials at room and high temperature

机译:钛酸锆-氧化锆本体复合材料在室温和高温下的弹性行为

获取原文
获取原文并翻译 | 示例

摘要

Zirconium titanate-zirconia composites have potential for applications involving variations of temperature. Elastic characterization is necessary to evaluate stresses developed in materials which may be used in these kinds of applications. In this work, Young's and shear modulus and Poisson's ratio of two zirconium titanate-zirconia bulk composites (Z(Y)T70 and Z(Y)T50) have been determined at room temperature by the Impulse Excitation Technique (JET). Furthermore, Young's modulus (E) has been determined at high temperature (up to 1400°C) for both composites. yong's modulus of Z(Y)T70 composite decreases ≈6% between room temperature and 400 °C due to the presence of zirconia. From 400 to 1400°C, the decrease of E (≈14%) is due to the presence of zirconium titanate. Young's modulus behaviour at high temperature of Z(Y)T50 mmposite is determined by the degree of microcrack healing, which depends on the maximum temperature reached.
机译:钛酸锆-氧化锆复合材料具有涉及温度变化的应用潜力。弹性表征对于评估在此类应用中可能使用的材料中产生的应力是必要的。在这项工作中,已通过脉冲激发技术(JET)在室温下确定了两种钛酸锆-氧化锆本体复合材料(Z(Y)T70和Z(Y)T50)的杨氏模量和剪切模量以及泊松比。此外,两种复合材料均在高温(最高1400°C)下测定了杨氏模量(E)。在室温和400°C之间,由于存在氧化锆,Z(Y)T70复合材料的yong模量下降≈6%。从400到1400°C,E的降低(≈14%)是由于钛酸锆的存在。 Z(Y)T50毫米高温下的杨氏模量行为取决于微裂纹的愈合程度,这取决于达到的最高温度。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号