...
首页> 外文期刊>Journal of the Chinese Institute of Chemical Engineers >Gas discharged from a horizontal nozzle in a two-dimensional bed
【24h】

Gas discharged from a horizontal nozzle in a two-dimensional bed

机译:从二维床中的水平喷嘴排出的气体

获取原文
获取原文并翻译 | 示例
           

摘要

All of the experiments were conducted in a two-dimensional quiescent bed. The cross section was 400 x 15 mm. Glass beads were used as the bed material. The glass bead particle sizes ranged from 69 to 920 mum. The hydrodynamic behavior of gas discharged from a horizontal nozzle was investigated under various operating conditions. The operating parameters included the nozzle diameter, particle size, static bed height and gas velocity through the nozzle. For a single horizontal nozzle, the gas discharge mode under low gas velocity through the nuzzle or high static bed height was void. At high nozzle gas velocity or low static bed height, a horizontal jet was observed. The gas discharge mode changed from void to jet as the Froude number increased. [References: 15]
机译:所有实验均在二维静态床中进行。横截面为400×15mm。玻璃珠用作床材料。玻璃珠的粒径范围为69至920μm。在各种操作条件下研究了从水平喷嘴排放的气体的流体动力学行为。操作参数包括喷嘴直径,粒径,静态床高和通过喷嘴的气体速度。对于单个水平喷嘴,在通过喷嘴的低气体速度或高静态床高度下的气体排放模式无效。在高喷嘴气体速度或低静态床高度下,观察到水平射流。随着弗洛德数的增加,气体排放模式从空变为喷射。 [参考:15]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号