Pre-treatment of Flax Fibers for use in Rotationally Molded Biocomposites

摘要

The objective of this study was to determine the effects of pre-treated flax fibers on the performance of the fiber-reinforced composites.Lack of good interfacial adhesion and poor resistance to moisture absorption make the use of natural fiber-reinforced composites less attractive.In order to improve fiber/matrix interfacial properties,fibers were subjected to chemical treatments,namely,mercerization,silane treatment,benzoylation,and peroxide treatment.Selective removal of non-cellulosic compounds constitutes the main objective of the chemical treatments of flax fibers to improve the performance of fiber-reinforced composites.Flax fibers were derived from Saskatchewan-grown flax straws.Composites consisting of high-density polyethylene(HDPE)or linear low-density polyethylene(LLDPE)or HDPE/LLDPE mix,chemically treated fibers and additives were prepared by the extrusion process.The test samples were prepared by rotational molding.The fiber surface morphology and the tensile fracture surfaces of the composites were characterized by scanning electron microscopy(SEM).The effects of the different chemical treatments on the mechanical and the physical properties of natural fiber-reinforced composites were investigated.The differential scanning calorimetry(DSC)was used to measure the melting point of the fiber-reinforced composites.