首页> 外文期刊>Journal of Petroleum Science & Engineering >Analysis of compaction phenomena due to water injection in reservoirs with a three-phase geomechanical model
【24h】

Analysis of compaction phenomena due to water injection in reservoirs with a three-phase geomechanical model

机译:用三相地质力学模型分析注水引起的压实现象

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

In coastal regions, land subsidence that results from industrial pumping of underground fluids, such as methane, is documented by in situ surveys. Laboratory characterization of gas bearing formations has also been published, which complements knowledge of reservoir compaction due to variation of fluid pressures. Gas withdrawal is reproduced in the laboratory by injecting water under a constant uniaxial or hydrostatic load to simulate the overburden. The water injection experiments provoke plastic compaction of the samples. This paper proposes a new modelling of the observed compaction of samples, as well as the changes in compressibility and size of the elasticity domain during water injection. The conceptual framework relies on the mechanics of unsaturated weak rocks, provided that the subsidence phenomenon concerns a three-phase material with solid minerals, liquid water and gas. The proposed constitutive model called ACMEG-s describes the water retention capability of the studied soils and their mechanical behaviour. Consequently, the elasto-plastic volumetric changes within the porous medium incorporate the effects of water saturation and capillary pressure, or suction. The yield locus is formulated such that the shape of the yield limit depends on suction to model the apparent added stiffness that results from low water saturation. The modelling framework, based on generalising the effective stress principle to three-phase media, also provides an elasto-plastic explanation of the well-known "wetting pore collapse" phenomenon. The ACMEG-s model shows consistent understanding of compressibility changes as the quantity of retained water varies. The successive phases of isotropic compression and uniaxial mechanical compaction are used for the model calibration. Interestingly, the phases of plastic compression during the water injection are captured accurately, which indicates that the model is applicable to reservoir-related subsidence studies.
机译:在沿海地区,通过现场勘测记录了由地下流体(如甲烷)的工业泵送引起的地面沉降。还公开了含气地层的实验室特征,以补充由于流体压力变化而引起的储层压实知识。在实验室中,通过在恒定的单轴或静水压力下注入水来模拟覆盖层,从而提取出瓦斯。注水实验引起样品的塑性压缩。本文提出了一种新的建模模型,可以观察到的样品压实度以及注水过程中可压缩性和弹性域大小的变化。如果沉降现象涉及一种由固体矿物,液态水和天然气组成的三相材料,则该概念框架依赖于不饱和软岩的力学。所提出的本构模型称为ACMEG-s,描述了所研究土壤的保水能力及其机械行为。因此,多孔介质内的弹塑性体积变化会结合水饱和度和毛细管压力或吸力的影响。屈服轨迹的制定使得屈服极限的形状取决于吸力,以模拟由于水饱和度低而产生的表观增加的刚度。基于将有效应力原理推广到三相介质的建模框架,也为众所周知的“润湿孔塌陷”现象提供了弹塑性解释。 ACMEG-s模型显示了随着保留水量变化而对可压缩性变化的一致理解。各向同性压缩和单轴机械压实的连续阶段用于模型校准。有趣的是,注水过程中的塑性压缩阶段被准确地捕获,这表明该模型适用于与储层有关的沉降研究。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号