首页> 外文期刊>Journal of Polymer Science, Part A. Polymer Chemistry >Production of micron-sized monodispersed polymer particles by seeded polymerization for the dispersion of highly monomer-swollen particles prepared with submicron-sized polymer seed particles utilizing the dynamic swelling method
【24h】

Production of micron-sized monodispersed polymer particles by seeded polymerization for the dispersion of highly monomer-swollen particles prepared with submicron-sized polymer seed particles utilizing the dynamic swelling method

机译:通过动态聚合方法,通过种子聚合生产用于分散由亚微米级聚合物种子颗粒制备的高度单体溶胀的颗粒的种子聚合生产微米级单分散聚合物颗粒

获取原文
获取原文并翻译 | 示例
           

摘要

For the purpose of extending the size range of polymer seed particles used in "dynamic swelling method" (DSM), first it was verified theoretically that the submicron-sized polymer particles produced by emulsion polymerization can also absorb a large amount of monomer by DSM in both equilibrium and kinetic control states. Next, on the basis of the theoretical results, experimentally about 2.6 mu m-sized styrene-swollen polystyrene (PS) particles were prepared utilizing DSM in the presence of 0.64 mu m-sized monodispersed PS seed particles produced by emulsifier-free emulsion polymerization. Moreover, 2.5 mu m-sized monodispersed PS particles were produced by the addition of cupric chloride as a water-soluble inhibitor to depress the by-production of submicron-sized PS particles in the seeded polymerization at 30 degrees C with 2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile) initiator. (C) 1998 John Wiley & Sons, Inc. [References: 15]
机译:为了扩大“动态溶胀法”(DSM)中使用的聚合物种子颗粒的尺寸范围,首先在理论上验证了乳液聚合制得的亚微米级聚合物颗粒还可以通过DSM吸收大量单体。平衡和动力学控制状态。接下来,基于理论结果,在无乳化剂乳液聚合制得的0.64μm尺寸的单分散PS种子颗粒的存在下,利用DSM在实验上制备了约2.6μm尺寸的苯乙烯溶胀的聚苯乙烯(PS)颗粒。此外,通过加入氯化铜作为水溶性抑制剂,制得2.5微米大小的单分散PS颗粒,以抑制在30摄氏度下以2,2'-引发的聚合过程中亚微米级PS颗粒的副产物。偶氮双(4-甲氧基-2,4-二甲基戊腈)引发剂。 (C)1998 John Wiley&Sons,Inc. [参考:15]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号