...
首页> 外文期刊>Journal of Nuclear Materials: Materials Aspects of Fission and Fusion >Investigation of liquid LBE embrittlement effects on irradiated ferritic/martensitic steels by slow-strain-rate tensile tests
【24h】

Investigation of liquid LBE embrittlement effects on irradiated ferritic/martensitic steels by slow-strain-rate tensile tests

机译:通过慢应变速率拉伸试验研究液态LBE脆化对辐照铁素体/马氏体钢的影响

获取原文
获取原文并翻译 | 示例
           

摘要

In the present work, LBE (lead-bismuth eutectic) embrittlement effects on ferritic/martensitic (FM) steels have been studied by conducting slow-strain-rate tensile (SSRT) testing on T91 and F82H steels either in Ar or in liquid LBE after irradiation to doses up to about 20 dpa in a mixed spectrum of spallation neutrons and high energy protons. SSRT tests were performed at temperatures in the range of 150-500 °C. Tests in Ar revealed significant irradiation-induced hardening and embrittlement effects (loss of ductility) as compared to the unirradiated ones. Tests in LBE showed additional embrittlement effects induced by LBE, which increased with irradiation-induced hardening. As a consequence, the fracture strain of irradiated specimens was reduced to a very low level of about 2-3%. A combination of the model of adsorption-induced reduction in cohesion of atomic bonds and the Kelly-Tyson-Cottrell criterion (σ/τ ≥ σ _(max)/τ _(max)) for brittle cleavage fracture was used to interpret qualitatively the observation reported in the present paper.
机译:在目前的工作中,通过在氩气或液态LBE中对T91和F82H钢进行慢应变速率拉伸(SSRT)测试,研究了LBE(铅-铋共晶)对铁素体/马氏体(FM)钢的脆化作用。在散裂中子和高能质子的混合光谱中辐照剂量高达约20 dpa。 SSRT测试在150-500°C的温度范围内进行。在Ar中进行的测试显示,与未辐照的相比,辐照引起的明显的硬化和脆化效果(延展性降低)。 LBE中的测试表明,LBE还会引起额外的脆化作用,并随辐射诱导的硬化而增加。结果,被辐照样品的断裂应变降低到约2-3%的非常低的水平。结合使用吸附诱导的原子键内聚减少模型和脆性裂解断裂的Kelly-Tyson-Cottrell准则(σ/τ≥σ_(max)/τ_(max))来定性地解释观察报告在本文中。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号