...
首页> 外文期刊>Chemical Engineering Communications >Diffusional effect of pores on the densification in microgravity liquid phase sintered Fe-Cu alloys
【24h】

Diffusional effect of pores on the densification in microgravity liquid phase sintered Fe-Cu alloys

机译:孔的扩散对微重力液相烧结铁铜合金致密化的影响

获取原文
获取原文并翻译 | 示例
           

摘要

OLiPSE-02 Fe-Cu samples,which were liquid phase sintered under 10~(-5)torr in microgravity for 20,30,60,and 330 min for each composition,were analyzed in this article.The compositions of the samples are 80% Fe/Cu,70% Fe/Cu,60% Fe/Cu,and 50% Fe/Cu by volume.The experimental results of distortion and densification were presented.During the mirogravity processing,liquid ejection occured for the long duration samples with compositions 70% Fe/Cu and 60 Fe/Cu.Measurements fo the weights and dfimensions of all the beads were made adn their distributions were presented.One of the beads that are about the average weight and size from the 70% Fe/Cu long duration sample was chosen to be mounted,polished,etched,and analyzed under an optical microscope.The iron in the bead appeared as iron grains and its grain size was smaller than that in the mother sample with th esame composition.Discussions of the bead and its iron grain formations are provided.
机译:本文分析了OLiPSE-02 Fe-Cu样品,在10〜(-5)torr下对其进行微重力液相烧结20、30、60,每种成分的烧结时间分别为330分钟和30分钟。样品的成分为80 Fe / Cu,70%Fe / Cu,60%Fe / Cu和50%Fe / Cu的体积百分比。给出了变形和致密化的实验结果。在微重力处理过程中,长时间的样品会发生液体喷射组成分别为70%Fe / Cu和60 Fe / Cu。对所有珠子的重量和尺寸进行了测量,并给出了它们的分布。其中一个珠子的长约70%Fe / Cu。持续时间的样品被选择在光学显微镜下进行安装,抛光,蚀刻和分析。珠子中的铁表现为铁颗粒,其粒径小于具有相同成分的母体样品中的铁颗粒。提供了其铁晶粒结构。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号