Investigations on the Suitability of Coated Steel Piping System for High Pressure Seawater Reverse Osmosis Application

摘要

This study deals with the investigations concerning with the suitability of coated steel piping system as an economically viable alternative to costly stainless steel piping for high pressure seawater reverse osmosis (SWRO) application. The piping system selected for investigation is a carbon steel piping coated internally and externally with thermoplastic coating (coating powder Plascoat PPA 571). The performance of thermoplastic coating was investigated by conducting SWRO pilot plant test, salt spray test, mechanical tests and testing of the coating under crevices (both in pilot plant and laboratory), and for leachable organics and inorganics (both in laboratory and pilot plant test). The testing of coating in the pilot plant resulted in the formation of some blisters on the internal surface of the pipes. The blisters were broken causing the corrosion of underneath steel. The coating showed a poor resistance to salt fog test. In general, the coating performed satisfactorily under the crevices but showed blistering on either side of the test panels. The adhesive strength of the coating was found to be poor; however, it showed good flexibility. The results of chemical analysis did not show the leaching of organic or inorganic pollutants from the coating.