首页> 外文期刊>Journal of Infrared, Millimeter and Terahertz Waves >Design of Printed Monopole Antennas on Liquid Crystal Polymer Substrates
【24h】

Design of Printed Monopole Antennas on Liquid Crystal Polymer Substrates

机译:液晶聚合物基板上印刷单极天线的设计

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

In this paper, a compact printed monopole antenna with an extremely wide bandwidth has been realized on Liquid Crystal Polymer (LCP) substrates by using standard processing technology. Both laminated and directed metalized LCP substrates were used in this experiment. The antenna made on the direct metalized LCP substrate performed well compared to on the laminated LCP substrate. To improve the adhesion, the surface of the LCP was further roughened and a certain adhesion layer was used prior to the deposition of Cu. The measured antenna on a metalized LCP substrate could cover this frequency band with an impedance bandwidth from 0.51 GHz to 14.4 GHz (28.2:1) for VSWRa parts per thousand currency sign2. Moreover, the antenna exhibits a nearly omni-directional radiation pattern. The size of this antenna is only about 0.18 lambda(1) x 0.13 lambda(1), where lambda(1) is the wavelength of the lowest operating frequency. The results show that LCP is a promising candidate for high frequency applications.
机译:在本文中,通过使用标准处理技术,已经在液晶聚合物(LCP)基板上实现了具有极宽带宽的紧凑型印刷单极天线。层压和定向金属化LCP基板均用于此实验。与层压LCP基板相比,直接金属化LCP基板上制成的天线性能良好。为了提高附着力,LCP的表面要进一步粗糙化,并在沉积铜之前使用一定的附着力层。对于千分之千的VSWRa零件,在金属化LCP基板上测得的天线可以覆盖此频带,其阻抗带宽为0.51 GHz至14.4 GHz(28.2:1)2。此外,天线表现出几乎全向的辐射方向图。该天线的大小仅为大约0.18 lambda(1)x 0.13 lambda(1),其中lambda(1)是最低工作频率的波长。结果表明,LCP是高频应用的有希望的候选者。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号