首页> 外文期刊>Journal of loss prevention in the process industries >Water induced thermal decomposition of pyrotechnic mixtures - Thermo kinetics and explosion pathway
【24h】

Water induced thermal decomposition of pyrotechnic mixtures - Thermo kinetics and explosion pathway

机译:水引起的烟火混合物的热分解-热力学和爆炸途径

获取原文
获取原文并翻译 | 示例
       

摘要

Pyrotechnic mixtures are susceptible to explosive decompositions. The aim of this paper is to generate thermal decomposition data for flowerpot tip, which is a mixture used in the tip of flowerpot fireworks for easy ignition. Several accidents were reported by using this mixture. The mixture is prepared by mixing barium nitrate, potassium nitrate, aluminum (666) and dextrin in a slurry manner with water. In the manufacturing process 40% water wt/wt is added to the mixture. The thermal characteristics of pure sample and water added sample were studied. Differential Scanning Calorimeter is used for screening tests and Accelerating Rate Calorimeter is used for detailed studies in adiabatic and isothermal mode. The self heat rate data obtained showed onset temperature for pure sample at 170.62℃ and the sample with water showed a much earlier onset at 95.71℃ in adiabatic mode. Also it gets decomposes even at 40℃ and starts exothermic characteristics with a substantial rise in system pressure of 32 bar in isothermal mode. The heats of exothermic decomposition and Arrhenius kinetics were computed.
机译:烟火混合物易爆炸分解。本文的目的是生成花盆尖端的热分解数据,该数据是花盆烟花中用于易燃的混合物。使用这种混合物报告了几起事故。该混合物是通过将硝酸钡,硝酸钾,铝(666)和糊精与浆液混合而制备的。在制造过程中,将40%wt / wt的水添加到混合物中。研究了纯样品和加水样品的热特性。差示扫描量热仪用于筛选测试,加速速率量热仪用于绝热和等温模式下的详细研究。所获得的自热速率数据显示纯样品在绝热模式下的起始温度为170.62℃,而加水样品的起始温度为95.71℃。而且即使在40℃时,它也会分解,并开始放热,在等温模式下,系统压力显着上升至32 bar。计算了放热分解热和阿累尼乌斯动力学。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号