Dilatometric study of martensitic transformation in NiTiCu and NiTi shape memory alloys

摘要

Dilatometric measurements have been carried out for the study of nature of martensitic transformation in the NiTiCu and NiTi shape memory alloy wire samples. Investigation has been done in the heat-treat temperature range 300-800 degreesC. NiTiCu exhibits only single stage A --> M martensitic transformation in the entire heat-treat temperature range indicating the suppression of R-phase by Cu substitution. NiTi shows the two-stage A --> R --> M martensitic transformation in the heat-treat temperature range 340-410 degreesC and the single-stage A --> M martensitic transformation above heat-treat temperature 410 degreesC. The extent of dilation during phase transformation decreases with increasing heat-treat temperature in both the alloys. Effect of first 15 thermal cycles on transformation temperatures in both the alloys has been studied. It is found that transformation temperatures are unaffected with thermal cycles in NiTiCu whereas considerable decrease in transformation temperatures has been observed in the case of NiTi. The stability of transformation temperatures in NiTiCu during M <-> A transformation against thermal cycling may be attributed to the associated smaller thermal hysteresis compared to NiTi. (C) 2001 Kluwer Academic Publishers. [References: 14]