首页> 外文期刊>Journal of Forensic Radiology and Imaging >Use of post-mortem computed tomography in Disaster Victim Identification. Positional statement of the members of the Disaster Victim Identification working group of the International Society of Forensic Radiology and Imaging; May 2014
【24h】

Use of post-mortem computed tomography in Disaster Victim Identification. Positional statement of the members of the Disaster Victim Identification working group of the International Society of Forensic Radiology and Imaging; May 2014

机译:事后计算机断层扫描在灾难受害者识别中的使用。国际法医放射学和成像学会灾害受害者识别工作组成员的立场声明; 2014年5月

获取原文
获取原文并翻译 | 示例
           

摘要

The safe handling of bodies or other material is beyond the scope of this document. However the computed tomography (CT) scanner and staff must be integrated into the appropriate body handling protocols for a particular event. When the body is delivered to the scanner it must be placed on the scan table, ideally in an anatomic supine 'head-up' position. The body should be fixed in place using straps. PMCT may be performed without breaking the seal of a body bag. However, if additional procedures to enhance the CT scan are required access to the body is required. Manipulation of the body may be required, including pulling the arms into the side of the body, break down of rigor mortis or performing soft tissue or even bone release in cases of burning, to allow the body to fit through the scan aperture. Opening of the body bag or manipulation of the body should only be done if safe to do so and if directed by the lead investigator. All manipulations of the body should be recorded.
机译:身体或其他材料的安全处理不在本文件范围之内。但是,对于特定事件,计算机断层扫描(CT)扫描仪和人员必须集成到适当的身体处理协议中。将尸体运送到扫描仪时,必须将其放在扫描台上,最好是解剖上仰卧的“抬头”位置。身体应使用皮带固定。可以执行PMCT而不会破坏尸体袋的密封性。但是,如果需要采取其他措施来增强CT扫描,则需要进入人体。可能需要操纵身体,包括将手臂拉入身体侧面,分解僵硬的死角,或者在燃烧时分解软组织,甚至释放骨骼,以使身体穿过扫描孔。只有在安全的情况下并且在首席调查员的指导下,才能打开身体的袋子或操纵身体。身体的所有操作都应记录下来。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号