...
首页> 外文期刊>Journal of Fluid Mechanics >STABILITY OF WET AGGLOMERATES IN GRANULAR SHEAR FLOWS
【24h】

STABILITY OF WET AGGLOMERATES IN GRANULAR SHEAR FLOWS

机译:颗粒状剪切流中湿团聚体的稳定性

获取原文
获取原文并翻译 | 示例
           

摘要

An agglomerate made of solid particles held together by a viscous liquid phase when sheared in an otherwise dry granular material is observed to deform by stretching. This observation, based on experimental results, is confirmed in the present paper by means of a computer simulation model. Simulations as well as experimental results indicate that the degree of deformation by stretching, a critical factor influencing the stability of such agglomerates, is governed by a dimensionless parameter of the system, called the deformation Stokes number, St(def). Two regimes, involving high and low characteristic degrees of deformation, can be identified based upon the value of this number. Simulation results indicate that for the range of conditions simulated, the value separating the two regimes, the critical deformation Stokes number, St(def)*, is relatively insensitive to the agglomerate size and other parameters of the system. This critical number defines the conditions below which forces inducing agglomerate breakage are low and above which they are high and result in agglomerate breakup. Calculation and/or measurement of this parameter is essential for prediction of equilibrium sizes of agglomerates in industrial granulation operations. [References: 20]
机译:当在干燥的粒状材料中剪切时,观察到由固体颗粒制成的附聚物在粘性液相中被剪切后会通过拉伸而变形。基于实验结果的这一观察结果在本文中通过计算机仿真模型得到了证实。仿真和实验结果表明,拉伸变形的程度是影响此类团聚体稳定性的关键因素,它受系统的无量纲参数控制,称为变形斯托克斯数St(def)。基于此数值的值,可以确定涉及高变形特征度和低变形特征度的两种状态。仿真结果表明,对于所模拟的条件范围,将两种状态分开的值即临界变形斯托克斯数St(def)*对团聚体尺寸和系统的其他参数相对不敏感。该临界值定义了以下条件,在这些条件下,导致团聚体破裂的力较低,在高于该条件时,它们导致团聚体破裂的力较高。该参数的计算和/或测量对于预测工业造粒操作中附聚物的平衡尺寸至关重要。 [参考:20]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号