...
首页> 外文期刊>Journal of environmental sciences >Delignification of disposable wooden chopsticks waste for fermentative hydrogen production by an enriched culture from a hot spring
【24h】

Delignification of disposable wooden chopsticks waste for fermentative hydrogen production by an enriched culture from a hot spring

机译:一次性木筷子废物的脱木素,通过温泉中的丰富培养物进行发酵制氢

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Hydrogen (H_2) production from lignocellulosic materials may be enhanced by removing lignin and increasing the porosity of the material prior to enzymatic hydrolysis. Alkaline pretreatment conditions, used to delignify disposable wooden chopsticks (DWC) waste, were investigated. The effects of NaOH concentration, temperature and retention time were examined and it was found that retention time had no effect on lignin removal or carbohydrate released in enzymatic hydrolysate. The highest percentage of lignin removal (41%) was obtained with 2% NaOH at 100℃, correlated with the highest carbohydrate released (67 mg/g_(pretreated DWC)) in the hydrolysate. An enriched culture from a hot spring was used as inoculum for fermentative H_2 production, and its optimum initial pH and temperature were determined to be 7.0 and 50℃, respectively. Furthermore, enzymatic hydrolysate from pretreated DWC was successfully demonstrated as a substrate for fermentative H_2 production by the enriched culture. The maximum H_2 yield and production rate were achieved at 195 mL H_2/g total sugars_(consumed) and 116 mL H_2/(L·day), respectively.
机译:在酶促水解之前,可以通过除去木质素并增加材料的孔隙率来提高木质纤维素材料的氢(H_2)产量。研究了用于预处理一次性木筷(DWC)废物的碱性预处理条件。检查了NaOH浓度,温度和保留时间的影响,发现保留时间对木质素的去除或酶水解产物中释放的碳水化合物没有影响。木质素去除率最高(41%)是在100℃下使用2%NaOH产生的,与水解产物中释放出的最高碳水化合物(67 mg / g_(预处理的DWC))相关。以来自温泉的富集培养物为发酵液生产H_2的接种物,确定其最佳初始pH和温度分别为7.0和50℃。此外,通过富集培养成功地证明了来自预处理的DWC的酶水解物可作为发酵H_2生产的底物。分别以195 mL H_2 / g总消耗糖和116 mL H_2 /(L·天)达到最大H_2产量和生产率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号