...
首页> 外文期刊>Journal of dentistry >Effect of water storage on the translucency of silorane-based and dimethacrylate-based composite resins with fibres
【24h】

Effect of water storage on the translucency of silorane-based and dimethacrylate-based composite resins with fibres

机译:贮水量对含硅纤维和二甲基丙烯酸酯基复合树脂纤维透明性的影响

获取原文
获取原文并翻译 | 示例

摘要

Objectives The purposes of this study were (1) to determine the translucency of silorane and dimethacrylate-based composite resins and (2) to evaluate the effect of water storage and reinforcement with fibre on the translucency of composite resins. Methods Two light-cured composite resins (A2 shade), Filtek Silorane (silorane-based composite) and Valux Plus (dimethacrylate-based composite), were used in this study. The first group was used as the control with no reinforcements, the second was reinforced with polyethylene (Ribbond THM) and the third was reinforced with a glass fibre (Everstick Net) for each composite resin. Colour measurements were measured against white and black backgrounds with a Shadepilot (Degu Dent Gmbh, Hanau, Germany) spectrophotometer and recorded under a D65 light source, which reflects daylight. CIELAB parameters of each specimen were recorded at baseline and at 24 h, 168 h and 504 h. Translucency of materials was calculated using the translucency parameter (TP) formula. Data were analyzed using repeated measures ANOVA and LSD post hoc tests (α = 0.05). Results The highest baseline TP value was in the Valux Pluson-fibre reinforced group (14.06 ± 1) and the lowest in the Filtek Silorane/Ribond THM group (8.98 ± 1.11). Repeated measures ANOVA revealed significant effects from the factors storage time, composite resin, composite resin × storage time and fibre × time (p = 0.047; p = 0.001; p = 0.013; p = 0.022, respectively). Conclusion Within the limitations of the study, we concluded that inclusion of polyethylene and glass fibres did not alter the translucency of the different-based composite resins. The longest storage time resulted in the greatest change in translucency values of Filtek Silorane composite resins. Clinical significance Considering the translucencies of composites with different formulations in the selection of composite resins for aesthetic restorations is important in terms of obtaining optimal aesthetic outcomes.
机译:目的这项研究的目的是(1)确定基于硅氧烷和二甲基丙烯酸酯的复合树脂的半透明性,以及(2)评估纤维贮水和增强对复合树脂半透明性的影响。方法采用两种光固化复合树脂(A2色光),Filtek Silorane(基于硅氧烷的复合材料)和Valux Plus(基于二甲基丙烯酸酯的复合材料)进行研究。第一组用作无增强剂的对照,第二组用聚乙烯(Ribbond THM)增强,第三组用每种复合树脂的玻璃纤维(Everstick Net)增强。使用Shadepilot(德国,哈瑙,Degu Dent Gmbh,德国)分光光度计在白色和黑色背景下进行颜色测量,并在反射日光的D65光源下记录。在基线,24 h,168 h和504 h记录每个样品的CIELAB参数。使用半透明参数(TP)公式计算材料的半透明性。使用重复测量方差分析和LSD事后检验分析数据(α= 0.05)。结果Valux Plus /非纤维增强组的最高基线TP值(14.06±1),Filtek Silorane / Ribond THM组的最低TP(8.98±1.11)。重复测量的方差分析表明,储存时间,复合树脂,复合树脂×储存时间和纤维×时间的影响显着(分别为p = 0.047; p = 0.001; p = 0.013; p = 0.022)。结论在研究范围内,我们得出的结论是,包含聚乙烯和玻璃纤维不会改变不同基复合树脂的半透明性。最长的存储时间导致Filtek Silorane复合树脂的半透明值变化最大。临床意义在选择用于美学修复的复合树脂时,考虑不同配方的复合材料的半透明性对于获得最佳的美学效果非常重要。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号