首页> 外文期刊>Journal of Chemical Technology & Biotechnology >Mixing and solid-liquid mass transfer characteristics in a three phase pulsed plate column with packed bed of solids in interplate spaces-a novel aerobic immobilized cell bioreactor
【24h】

Mixing and solid-liquid mass transfer characteristics in a three phase pulsed plate column with packed bed of solids in interplate spaces-a novel aerobic immobilized cell bioreactor

机译:板间空间中固体填充床的三相脉冲板式塔的混合和固液传质特性-一种新型好氧固定化细胞生物反应器

获取原文
获取原文并翻译 | 示例
           

摘要

The pulsed plate column (PPC) with packed bed of solids in the interplate spaces finds use as a three phase aerobic bioreactor and is a potential heterogeneous catalytic reactor. Good knowledge of the extent of mixing in the liquid phase and solid-liquid mass transfer coefficient are essential for modeling, design and optimization of these columns. The present work aims at the study of liquid phase mixing and solid-liquid mass transfer characteristics in a three phase PPC. Results: Residence time distribution studies were performed. Dispersion number was found to increase with increase in liquid superficial velocities, frequency of pulsation, amplitude of pulsation and the vibrational velocities. Increase in frequency and amplitude of pulsation, and hence increase in vibrational velocity, resulted in increase of the solid-liquid mass transfer coefficient. Conclusions: The mixing behaviour in this contactor approximated a mixed flow behaviour. The three phase PPC was found to outperform many other kinds of three phase contactors in terms of solid liquid mass transfer characteristics. Empirical correlations developed can be used for the determination of solid-liquid mass transfer coefficients for three phase PPC and hence can facilitate the design, scale-up and modeling of these columns, when used as chemical or biochemical reactors.
机译:在板间空间中装有固体床的脉冲板塔(PPC)被用作三相好氧生物反应器,并且是潜在的多相催化反应器。对液相混合程度和固液传质系数的充分了解对于这些塔的建模,设计和优化至关重要。本工作旨在研究三相PPC中的液相混合和固液传质特性。结果:进行了停留时间分布研究。发现分散数随液体表观速度,脉动频率,脉动幅度和振动速度的增加而增加。脉动的频率和幅度的增加,因此振动速度的增加,导致固液传质系数的增加。结论:在该接触器中的混合行为近似于混合流动行为。就固液传质特性而言,发现三相PPC优于许多其他种类的三相接触器。所建立的经验相关性可用于确定三相PPC的固液传质系数,因此当用作化学或生化反应器时,可促进这些色谱柱的设计,放大和建模。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号