首页> 外文期刊>Journal of Bioactive and Compatible Polymers >Semi-interpenetrating Polymer Network Superporous Hydrogels Based on Poly(3-Sulfopropyl Acrylate,Potassium Salt) and Poly(Vinyl Alcohol): Synthesis and Characterization
【24h】

Semi-interpenetrating Polymer Network Superporous Hydrogels Based on Poly(3-Sulfopropyl Acrylate,Potassium Salt) and Poly(Vinyl Alcohol): Synthesis and Characterization

机译:聚(3-磺丙基丙烯酸酯,钾盐)和聚(乙烯醇)的半互穿聚合物网络超孔水凝胶的合成与表征

获取原文
获取原文并翻译 | 示例
           

摘要

Semi-interpenetrating polymer network (semi-IPN) superporous hydrogels (SPHs) based on poly(3-sulfopropyl acrylate,potassium salt) (PSPA) and linear polymers were synthesized using poly(ethylene glycol) diacrylate (PEGDA) or N,N'-methylenebisacrylamide (BIS) as a crosslinker.The swelling ratio of SPHs was determined by measuring the weight of absorbed water; and the mechanical strength of swollen SPHs was evaluated using texture analyzer.Taguchi orthogonal experimental design [L_9(3~4)] was used to evaluate the influence of four factors,consisting of the ratios of 3-sulfopropyl acrylate (SPA) to PEGDA,to initiator,and to acrylic acid (AAc),and acidification of PSPA-SPHs,with each containing three levels on the swelling ratio and mechanical strength of semi-IPN PSPA-SPHs.Analysis of variance (ANOVA) of the experimental design results was carried out using a SAS program.The structure of SPHs was examined using a scanning electron microscope (SEM).Among the polymers evaluated,poly(vinyl alcohol) (PVA) was the best linear polymer to improve the mechanical strength of swollen SPHs.ANOVA indicate that the ratio of SPA to PEGDA and to an initiator,as well as acidification had significant effects on the swelling ratios of PSPA-SPHs.The ratio of SPA to AAc and acidification had significant effects on the mechanical strength,which deceased with increased swelling ratio and time.The optimized semi-IPN PSPA-SPH containing 5% w/w PVA had a swelling ratio 20 times greater within minutes and then up to 40 times.The mechanical strength was over 200 g/cm~2 for a fully swollen gel in a pH 1.2 HC1 medium.The optimal PSPA-SPH has swelling and mechanical properties suitable for development of gastro retentive drug delivery systems.
机译:基于聚(丙烯酸3-磺丙酯,钾盐)(PSPA)和线性聚合物的半互穿聚合物网络(semi-IPN)超孔水凝胶(SPHs)是使用聚乙二醇二丙烯酸酯(PEGDA)或N,N'合成的-亚甲基双丙烯酰胺(BIS)作为交联剂。通过测量吸收水的重量来确定SPHs的溶胀率。 Taguchi正交实验设计[L_9(3〜4)]用来评估四个因素的影响,该因素由丙烯酸3-磺基丙酯(SPA)与PEGDA的比例组成,引发剂,丙烯酸(AAc)以及PSPA-SPHs的酸化,每个都包含半IPN PSPA-SPHs的溶胀率和机械强度三个等级。实验设计结果的方差分析(ANOVA)是使用扫描电子显微镜(SEM)检查SPH的结构。在所评估的聚合物中,聚乙烯醇(PVA)是改善膨胀SPH的机械强度的最佳线性聚合物。表明SPA对PEGDA和引发剂的比例以及酸化对PSPA-SPHs的溶胀率有显着影响。SPA对AAc的比例和酸化对机械强度有显着影响,随优化的含5%w / w PVA的半IPN PSPA-SPH的溶胀比在几分钟内增大了20倍,然后达到了40倍。机械强度超过200 g / cm〜2在pH 1.2的HC1介质中完全溶胀的凝胶。最佳的PSPA-SPH具有溶胀和机械性能,适合开发胃固性药物传递系统。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号