...
首页> 外文期刊>Journal of Applied Polymer Science >The rheological behavior of immiscible polymer blends
【24h】

The rheological behavior of immiscible polymer blends

机译:不混溶的聚合物共混物的流变行为

获取原文
获取原文并翻译 | 示例

摘要

The complex shear modulus of immiscible polymer blends was measured by a frequency sweep experiment for polystyrene (PS)/low density polyethylene (LDPE) and poly(methylmethacrylate) (PMMA)/LDPE blends at constant composition (13.5/86.5 vol %) and compared with the prediction model of Palierne. Different morphologies of each blend were also prepared using a rheometer with a constant shear rate and different strain. There was morphological dependency on the complex shear modulus at constant temperature. However, this dependency disappeared at specific temperatures in the frequency sweep experiment. There seemed to be a specific temperature like critical flow temperature (T-cf) of amorphous polymer. The difference in morphology affected the complex shear modulus of blends below the specific temperature, T-cf, but did play a major role in determining the complex shear modulus of blends at over specific temperature. A new method may be needed to determine the critical flow temperature of an amorphous polymer via the measurement of a complex shear modulus for immiscible polymer blends. (C) 2002 Wiley Periodicals, Inc. [References: 34]
机译:通过频率扫描实验,以恒定组成(13.5 / 86.5 vol%)对聚苯乙烯(PS)/低密度聚乙烯(LDPE)和聚(甲基丙烯酸甲酯)(PMMA)/ LDPE混合物进行混频测试,并进行了比较使用Palierne的预测模型。还使用具有恒定剪切速率和不同应变的流变仪制备每种共混物的不同形态。在恒定温度下,形态对复数剪切模量有依赖性。但是,这种依赖在频率扫描实验中的特定温度下消失了。似乎有一个特定的温度,如非晶态聚合物的临界流动温度(T-cf)。形态上的差异影响了低于特定温度T-cf的共混物的复数剪切模量,但在确定高于特定温度的共混物的复数剪切模量中起了重要作用。可能需要一种新方法,通过测量不混溶的聚合物共混物的复数剪切模量来确定非晶态聚合物的临界流动温度。 (C)2002 Wiley Periodicals,Inc. [参考:34]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号