Sewage Sludge Dewatering Process Using Liquefied Dimethyl Ether as Solid Fuel

摘要

This article describes the dewatering of sewage sludge using liquefied dimethyl ether (DME), which clarified the effect of sludge type and its particle size. Changes in the heating value of the dewa-tered sludge were also examined. In addition, the change in dewater-ability upon reuse of the liquefied DME was investigated experimentally. Regardless of the nature of the sludge, its dewatering behavior was similar. The amount of dewatered water could be increased by decreasing the diameter of the sludge cake. Complete drying of the sludge cake via DME dewatering resulted in retention of approximately 96% of the heating value (17.7 M J/kg-sludge) of the original sludge cake dry base (18.4MJ/kg db). The DME could be recovered after extraction, and reuse experiments showed that liquefied DME dewatering performance was unchanged after five reuses.