首页> 外文期刊>Hwahak konghak >Preparation of Hard Coating Solutions with High Refractive Index for Polycarbonate Sheet by the Sol-Gel Method
【24h】

Preparation of Hard Coating Solutions with High Refractive Index for Polycarbonate Sheet by the Sol-Gel Method

机译:溶胶-凝胶法制备聚碳酸酯高折射率硬涂层溶液

获取原文
获取原文并翻译 | 示例
           

摘要

In order to overcome the problem of poor hardness of transparent polycarbonate(PC)sheets,organic-inorganic hybrid hard coating solutions,which show a high refractive index above 1.58,were made by the sol-gel method.These hybrid coating solutions were obtained from mixture of titanium tetraisopropoxide(TTIP),and(3-glycidoxypro-pyl)trimethoxysilane(GPTMS).The PC sheets were spin-coated,and cured at 120°C for 2 hr.Change of refractive index in the range of 1.53-1.61 was obtained by varying the GPTMS content.The refractive index of the coated film decreased with increasing the GPTMS content,while the pencil hardness of the coated film was found to increase with increasing the GPTMS content.
机译:为了解决透明聚碳酸酯(PC)片材硬度差的问题,采用溶胶-凝胶法制备了折射率高于1.58的有机-无机杂化硬涂层溶液。将四异丙醇钛(TTIP)和(3-环氧丙氧基丙基)三甲氧基硅烷(GPTMS)的混合物混合。将PC片旋涂,并在120°C固化2小时。折射率变化在1.53-1.61范围内通过改变GPTMS的含量可以得到。涂膜的折射率随GPTMS含量的增加而降低,而发现涂膜的铅笔硬度随GPTMS含量的增加而增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号