...
首页> 外文期刊>Carbohydrate Polymers: Scientific and Technological Aspects of Industrially Important Polysaccharides >Optimization of process parameters of the Pholiota squarrosa extracellular polysaccharide by Box-Behnken statistical design
【24h】

Optimization of process parameters of the Pholiota squarrosa extracellular polysaccharide by Box-Behnken statistical design

机译:利用Box-Behnken统计设计优化鳞生植物胞外多糖的工艺参数

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The quantitative effects of fermentation temperature, fermentation time and inoculum volume on the yield of Pholiota squarrosa extracellular polysaccharide were investigated using response surface methodology (RSM). The experimental data obtained were fitted to a second-order polynomial equation using multiple regression analysis and also analyzed by appropriate statistical methods. RSM analysis showed good correspondence between experimental and predicted values. It was found that three parameters represented significant effect. The coefficient of determination (R2) for the model was 98.5%. Probability value (P< .0001) demonstrated a very high significance for the regression model. By solving the regression equation and also by analyzing the response surface contour plots, the optimal process parameters were determined: fermentation temperature 28.57 °C, fermentation time 7.82 d and inoculum volume 12.57 ml. Under the optimal conditions the corresponding response value predicted for extracellular polysaccharide production was 853.73 μ g per milliliter of fermentation liquor, which was confirmed by validation experiments.
机译:采用响应面法(RSM)研究了发酵温度,发酵时间和接种量对南瓜鳞茎细胞外多糖产量的定量影响。使用多元回归分析将获得的实验数据拟合到二阶多项式方程,并通过适当的统计方法进行分析。 RSM分析显示实验值和预测值之间具有良好的对应关系。发现三个参数代表显着效果。该模型的确定系数(R2)为98.5%。概率值(P <.0001)对于回归模型显示出非常高的意义。通过求解回归方程并分析响应表面轮廓图,确定了最佳工艺参数:发酵温度28.57°C,发酵时间7.82 d和接种量12.57 ml。在最佳条件下,预测的细胞外多糖产生相应的响应值为每毫升发酵液853.73μg,这已通过验证实验得到证实。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号