The influence of tertiary amine accelerators on the curing behaviors of epoxy/anhydride systems

摘要

Accelerators have significant effects on the curing behaviors of epoxy/anhydride (diglycidyl ether of bisphenol-F/methylhexahydrophthalic anhydride, DGEBF/MeHHPA) systems. Non-isothermal DSC was used to investigate the influence of dimethyl benzylamine (BDMA, 0.2phr/0.5phr) and Tris-(dimethyl aminomethyl) phenol (DMP-30, 0.2phr/0.5phr) on the curing behaviors of DGEBF/MeHHPA systems, respectively. When the amount of accelerators was kept constant, the activation energy calculated by Kissinger method changed slightly in the presence of either BDMA or DMP-30. And, with increasing the accelerator content from 0.2 phr to 0.5 phr, the value of activation energy decreased from 115 kJ/mol to 85 kJ/mol. Furthermore, the calculation results of Málek method identified that all systems in this study fitted Sesták-Berggren (SB) model and the corresponding model parameters, m and n, were obtained. It was found that the contribution of autocatalytic reaction with low accelerator content (0.2 phr) was far less than that with high accelerator content (0.5 phr).