...
首页> 外文期刊>Talanta: The International Journal of Pure and Applied Analytical Chemistry >Field analysis of benzene, toluene, ethylbenzene and xylene in water by portable gas chromatography-microflame ionization detector combined with headspace solid-phase microextraction
【24h】

Field analysis of benzene, toluene, ethylbenzene and xylene in water by portable gas chromatography-microflame ionization detector combined with headspace solid-phase microextraction

机译:便携式气相色谱-微火焰电离检测器与顶空固相微萃取相结合对水中的苯,甲苯,乙苯和二甲苯进行现场分析

获取原文
获取原文并翻译 | 示例

摘要

In this work, portable gas chromatography-microflame ionization detection (portable GC-mu FID) coupled to headspace solid-phase microextraction (HS-SPME) was developed for the field analysis of benzene, toluene, ethylbenzene and xylene (BTEX) in water samples. The HS-SPME parameters such as fiber coating, extraction times, stirring rate, the ratio of headspace volume to sample volume, and sodium chloride concentration were studied. A 65 mu m poly(dimethylsiloxane)-divinylbenzene (PDMS-DVB) SPME fiber, 900 rpm, 3.0 ml of headspace (1.0 ml water sample in 4.0 ml vial), and 35% sodium chloride concentration (w/v) were respectively chosen for the best extraction response. An extraction time of 1.0 min was enough to extract BTEX in water samples. The relative standard deviation (R.S.D.) for the procedure varied from 5.4% to 8.3%. The method detection limits (MDLs) found were lower than 1.5 mu g/l, which was enough sensitive to detect the BTEX in water samples. The optimized method was applied to the field analysis of BTEX in wastewater samples. These experiment results show that portable GC-mu FID combined with HS-SPME is a rapid, simple and effective tool for field analysis. of BTEX in water samples. (c) 2005 Elsevier B.V. All rights reserved.
机译:在这项工作中,开发了与顶空固相微萃取(HS-SPME)耦合的便携式气相色谱-微火焰电离检测(便携式GC-μFID),用于现场分析水中的苯,甲苯,乙苯和二甲苯(BTEX) 。研究了HS-SPME的参数,例如纤维涂层,萃取时间,搅拌速率,顶空体积与样品体积的比以及氯化钠浓度。分别选择65微米的聚(二甲基硅氧烷)-二乙烯基苯(PDMS-DVB)SPME纤维,900 rpm,3.0 ml的顶空(1.0 ml的水样品在4.0 ml的小瓶中)和35%的氯化钠浓度(w / v)以获得最佳的提取响应。 1.0分钟的提取时间足以提取水样品中的BTEX。该程序的相对标准偏差(R.S.D.)从5.4%到8.3%不等。发现的方法检测限(MDL)低于1.5μg / l,足以检测水样品中的BTEX。优化后的方法应用于废水中BTEX的现场分析。这些实验结果表明,便携式GC-mu FID与HS-SPME结合使用是一种快速,简单而有效的现场分析工具。水中的BTEX含量。 (c)2005 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号