Sequential injection monosegmented flow voltammetric determination of cadmium and lead using a bismuth film working electrode

摘要

A cost-effective sequential injection monosegmented flow analysis (SI-MSFA) with anodic stripping voltammetric (ASV) detection has been developed for determination of Cd(II) and Pb(II). The bismuth film working electrode (BiFE) was employed for accumulative preconcentration of the metals by applying a fixed potential of -1.10 V versus Ag/AgCl electrode for 90 s. The SI-MSFA provides a convenient means for preparation of a homogeneous solution zone containing sample in an acetate buffer electrolyte solution and Bi(III) solution for in situ plating of BiFE, ready for ASV measurement at a flow through thin layer electrochemical cell. Under the optimum conditions, linear calibration graphs in range of 10-100 mu gL(-1) of both Cd(II) and Pb(II) were obtained with detection limits of 1.4 and 6.9 mu g L-1 of Cd(H) and Pb(II), respectively. Relative standard deviations were 2.7 and 3.1%, for 11 replicate analyses of 25 mu gL(-1) Cd(II) and 25 mu gL(-1) Pb(Il), respectively. A sample throughput of 12 h(-1) was achieved with low consumption of reagent and sample solutions. The system was successfully applied for analysis of water samples collected from a draining pond of zinc mining, validating by inductively coupled plasma-optical emission spectroscopy (ICP-OES) method. (C) 2009 Elsevier B.V. All rights reserved.