Miniature bandpass microwave filter with interference suppression by more than 100 dB in a wide rejection band

摘要

A new planar resonator design in which a single conductor is replaced by three parallel stripe conductors located one above the other on a suspended two-layer substrate is proposed. It is shown that the resonator longitudinal sizes can be significantly reduced and, at the same time, the resonator intrinsic Q factor and frequencies of higher oscillation modes can be increased. A fourth-order bandpass filter with a central frequency of the transmission band (relative width 5%) of 1 GHz has been developed and fabricated. This filter has a -100-dB rejection band up to frequencies exceeding 10 GHz. The filter is enclosed in a metallic case with an internal size of 38 × 12 × 7.5 mm. It is shown that a similar filter fabricated in accordance with low-temperature cofired ceramic (LTCC) technology has a -40-dB rejection band up to 30 GHz, with sizes reduced to 5.0 × 4.25 × 1.24 mm.