首页> 外文期刊>Polymer: The International Journal for the Science and Technology of Polymers >X-ray analysis of the internal rearrangement of the self-assembling columnar structure formed by a highly tapered molecule
【24h】

X-ray analysis of the internal rearrangement of the self-assembling columnar structure formed by a highly tapered molecule

机译:X射线分析由高度锥形分子形成的自组装柱状结构的内部重排

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Small angle and wide angle X-ray methods have been used to study the structure 2-{2-(2-hydroxyethoxy)-ethoxy}ethyl-3,4,5-tris(p-octadecyl-oxybenzyloxy)-b enzoate (H18-ABG-3EO-OH), which is one of a series of precursors used to synthesize polymers with highly tapered side chains that form self-assembling, columnar hexagonal (phi(h)) phases. This material is crystalline at room temperature, and undergoes crystalline-to-phi(h) and phi(h)-to-isotropic transitions in the region of 65-70 and 75-80 degrees C respectively, depending on the thermal history. Small angle X-ray data for oriented fibres drawn from the phi(h) phase and cooled to room temperature point to the presence of hexagonally packed columns with a diameter of 57 Angstrom. The corresponding wide angle data indicate that there is three dimensional order within the columns: we observe a six-point pattern probably due to packing of the C18 tails in a manner analogous to the hexagonal form of polyethylene. On annealing, there is a progressive increase in the internal order of the cylinders as the structure is converted to one analogous to the crystalline forms of the C12-tetraethoxy analog (HI2-ABG-4EO-OH) and the methacrylate polymer thereof (H12-ABG-4EO-PMA). These results suggest that the internal ordering now extends to the aromatic and tri-ethoxy units. Heating and cooling cycles from room temperature to successively higher temperatures show that these improvements in the internal order are accompanied by a progressive reduction in the diameter of the cylinders. (C) 1998 Published by Elsevier Science Ltd. All rights reserved. [References: 12]
机译:小角和广角X射线方法已被用来研究结构2- {2-(2-羟基乙氧基)-乙氧基}乙基-3,4,5-三(对十八烷基-氧苄氧基)-b苯甲酸酯(H18 -ABG-3EO-OH),这是一系列前体中的一种,用于合成具有高度锥形侧链的聚合物,这些侧链形成自组装的柱状六角形(phi(h))相。该材料在室温下为晶体,并且根据热历史,分别在65-70和75-80摄氏度范围内经历晶体到phi(h)和phi(h)到各向同性的转变。从phi(h)相抽出并冷却至室温的取向纤维的小角度X射线数据表明存在直径为57埃的六方填充柱。相应的广角数据表明列中存在三维顺序:我们观察到六点模式,这可能是由于C18尾部的堆积(类似于聚乙烯的六边形形式)所致。退火时,随着结构转变为类似于C12-四乙氧基类似物(HI2-ABG-4EO-OH)及其甲基丙烯酸酯聚合物(H12- ABG-4EO-PMA)。这些结果表明,内部排序现在扩展到芳族和三乙氧基单元。从室温到连续较高温度的加热和冷却循环表明,内部顺序的这些改善伴随着气缸直径的逐渐减小。 (C)1998由Elsevier Science Ltd.出版。保留所有权利。 [参考:12]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号