首页> 外文期刊>Polymer Testing >Correlation between impact strength and fractal dimensions of fracture surface for PLLAano-CaCO_3 composites
【24h】

Correlation between impact strength and fractal dimensions of fracture surface for PLLAano-CaCO_3 composites

机译:PLLA / nano-CaCO_3复合材料冲击强度与断裂面分形维数的相关性

获取原文
获取原文并翻译 | 示例
           

摘要

The V-notched Izod impact strength of poly-L-lactide composites filled with nanosized calcium carbonate was measured at room temperature. The fractal dimensions of the impact fracture surface were determined by means of the structure function method, and the relationship between the measured impact strength and the fractal dimensions of the specimen fracture surface was investigated. The results showed that the fractal dimensions of the fracture surface were within the range of about 1.76 to 1.97, all of the correlation coefficients were higher than 0.9, the strong linear correlation indicated that the fractal characterization of the fracture surface for the composites was significant, the measured impact strength increased obviously with increasing fractal dimension of the fracture surface and the correlation between them was roughly linear when the fractal dimension was more than 1.88.
机译:在室温下测量填充有纳米碳酸钙的聚L-丙交酯复合材料的V型缺口悬臂梁冲击强度。利用结构函数法确定了冲击断裂面的分形维数,并研究了实测冲击强度与试样断裂面分形维数之间的关系。结果表明,断裂面的分形维数在1.76至1.97范围内,所有相关系数均大于0.9,线性相关性强,表明复合材料断裂面的分形特征显着,分形维数大于1.88时,测得的冲击强度随断面分形维数的增加而明显增加,二者之间的相关关系大致呈线性关系。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号