Studying the effect of hyperbranched polymer modification on the kinetics of curing reactions and physical/mechanical properties of UV-curable coatings

摘要

A polyester-amide based hyperbranched polymer with hydroxyl end-groups is modified by the aid of acrylic functionalities. Two levels of modification, i.e. 40% and 65%, are considered. The unmodified hyperbranched polymer and the modified ones are added to UV-curable monomeric and oligomeric systems. Rheology measurements are conducted to investigate the effects of hyperbranched polymer on the rheological behavior. In order to assess the curing kinetics and physical/mechanical characteristics of the samples, photo-DSC and DMA experiments are exploited, respectively. The effect of viscosity and number of UV-curable functionalities of the hyperbranched polymer on the curing level and kinetics of the curing reactions are discussed. Dynamic mechanical analysis shows that the addition of hyperbranched polymer in the formulation increases a 25% in storage modulus of the glassy region and cross-linking density of the UV-curable coating. Furthermore, it is also seen that the existence of the hyperbranched polymer increases the viscosity of Trimethylolpropane triacrylate (TMPTA)-based system while it is decreasing the viscosity of oligomeric-based of the epoxy di-acrylate system. It is obtained that the hyperbranched polymer makes the curing level in the monomeric and the oligomeric system, improve up to 15% and 10% correspondingly. It is also observed that Tgs of the coatings containing the hyperbranched polymer increases up to 5.9 degrees C. (C) 2015 Elsevier B.V. All rights reserved.