Effect of gamma-lrradiation on the Physical Properties and Dyeability of Poly(vinyl butyral) Blends With Polystyrene and Poly(ethylene glycol)

摘要

Cast films of polymer blends essentially based on polyvinyl butyral) (PVB) and equal ratios of polystyrene (PS) and poly(ethylene glycol) (PEG) were prepared from benzene and butyl alcohol solutions of the individual polymers.The effect of 7-irradiation on the thermal decomposition and tensile mechanical properties was investigated.Moreover,the effect of 7-irradiation on the dye affinity of PVB/PS and PVB/PEG for basic and acid dyestuffs was studied.The thermogravimetric analysis (TGA) study showed that the unirradiated PVB polymer films prepared in benzene displayed higher thermal stability than the same polymer films prepared in butanol.However,in all cases the thermal stability was found to increase with increasing 7-irradiation dose.On the other hand,PVB/PS blend possesses higher thermal stability than PVB/PEG,as shown from the determination of the weight loss (%) at different heating temperatures,the temperatures of the maximum rate of reaction and the activation energy.While,pure PS films showed the stress-strain behavior of brittle polymers,PVB/PS films showed the behavior of tough polymers with yielding properties.The results of dyeing clearly showed that the solvent type,blend composition,and irradiation dose are determining factors for the dye affinity for basic or acid dyes.For example,unirradiated PVB films prepared from butanol displayed a higher affinity for the basic and acid dyes than the same polymer prepared from the same benzene.However,PVB prepared from butanol showed higher affinity to the dyes than PS prepared from the same solvent.