首页> 外文期刊>Chemical engineering journal >Competitive particle growth: A tool to control the particle size distribution for the synthesis of high solids content low viscosity latexes
【24h】

Competitive particle growth: A tool to control the particle size distribution for the synthesis of high solids content low viscosity latexes

机译:竞争性颗粒生长:一种控制粒径分布的工具,用于合成高固含量低粘度乳胶

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The competitive particle growth of bimodal latexes during the emulsion copolymerization of methyl methacrylate/butyl acrylate/methacrylic acid (MMA/BA/MAA) was investigated. It was found that the volumetric growth ratio of the large over the small population of particles was a function of the particle size ratio and the weight fraction of each population of particles; namely, of the number of polymer particles of each population. The available models for the prediction of the competitive growth could not predict the latter dependence and therefore an empirical model was built. The model was able to reasonable fit the experimental data and the dependence over both variables. The empirical model of the competitive growth was then used to control the particle size distribution of bimodal latexes in seeded semibatch emulsion polymerization reactions. The control of the particle size distribution was the key parameter to synthesize high solids content latexes. Thus, MMA/BA/MAA copolymer latexes with solids content of 70wt% and particle sizes smaller than 350 nm with viscosities below 1 Pa s (measured at 100 s~(-1)) were easily produced.
机译:研究了在甲基丙烯酸甲酯/丙烯酸丁酯/甲基丙烯酸(MMA / BA / MAA)乳液共聚过程中双峰胶乳的竞争性颗粒生长。结果发现,大颗粒粒子对小颗粒粒子的体积生长率是颗粒大小比和每个颗粒粒子的重量分数的函数。即每个群体的聚合物颗粒的数量。用于预测竞争性增长的可用模型无法预测后者的依赖性,因此建立了经验模型。该模型能够合理拟合实验数据以及对两个变量的依赖性。然后将竞争性增长的经验模型用于控制种子半间歇乳液聚合反应中双峰乳胶的粒径分布。粒度分布的控制是合成高固含量胶乳的关键参数。因此,容易制备固体含量为70wt%并且粒度小于350nm,粘度低于1Pa·s(在100s〜(-1)下测量)的MMA / BA / MAA共聚物胶乳。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号