...
首页> 外文期刊>Chemical engineering journal >Uniform acid poly ionic liquid-based large particle and its catalytic application in esterification reaction
【24h】

Uniform acid poly ionic liquid-based large particle and its catalytic application in esterification reaction

机译:均匀酸性聚离子液体基大颗粒及其在酯化反应中的催化应用

获取原文
获取原文并翻译 | 示例

摘要

Uniform large particles (millimeter class) of acid poly ionic liquid (PIL-A) were synthetized, and characterized by FT-IR, XRD, TGA/DCS, and SEM. Thermostability and mechanical strength of PIL-A are much higher than that of commercial resin. Its catalytic properties were investigated through the esterification of methacrylic acid and methanol as the objective reaction. Results showed that the catalytic activity of PIL-A was higher than that of commercial resin. The optimum reaction conditions were as follows: 5 wt% catalyst, 95 degrees C reaction temperature, 3 h reaction time, and methacrylic acid to methanol mole ratio of 1:1.2. The yield of methyl methacrylate is 100%, under optimum reaction conditions. The catalytic activities of PIL-A with different esterifications were also investigated. PIL-A had a higher catalytic activity to different esterification. The catalytic activity of PIL-A did not decrease after it was reused for five times. Continuous reaction to methyl methacrylate (MMA) with a fixed bed reactor was further investigated. The percentage of MMA in the product was >96%. (C) 2015 Elsevier B.V. All rights reserved.
机译:合成了酸性聚离子液体(PIL-A)的均匀大颗粒(毫米级),并通过FT-IR,XRD,TGA / DCS和SEM对其进行了表征。 PIL-A的热稳定性和机械强度远高于市售树脂。通过甲基丙烯酸和甲醇的酯化反应作为目标反应,研究了其催化性能。结果表明,PIL-A的催化活性高于商业树脂。最佳反应条件如下:催化剂为5重量%,反应温度为95℃,反应时间为3小时,甲基丙烯酸与甲醇的摩尔比为1∶1.2。在最佳反应条件下,甲基丙烯酸甲酯的收率为100%。还研究了具有不同酯化作用的PIL-A的催化活性。 PIL-A对不同的酯化反应具有较高的催化活性。重复使用五次后,PIL-A的催化活性没有降低。进一步研究了固定床反应器与甲基丙烯酸甲酯(MMA)的连续反应。产品中MMA的百分比> 96%。 (C)2015 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号