首页>外文期刊>一般工业技术>International journal of materials and structural integrity

International journal of materials and structural integrity

中文名称：国际材料与结构完整性杂志

ISSN：1745-0055
出版周期：Quarterly

发文量：255

期刊论文

热门论文

年度选择

2021
- 第4期
2020
- 第1期
2019
- 第3期
- 第4期
2018
- 第3期
- 第4期
2017
- 第3期
- 第4期
2016
- 第3期
- 第4期
2015
- 第3期
- 第4期
2014
- 第3期
- 第4期
2013
- 第3期
- 第4期
2012
- 第1期
- 第4期
2011
- 第1期
- 第3期
- 第4期
2010
- 第1期
- 第4期
2009
- 第1期
- 第3期
- 第4期
2008
- 第2期
- 第3期
- 第4期

更多>>

全选（0）

1.An overview of some key issues about microano manufacturing

机译：关于微米/纳米制造的一些关键问题的概述
- 作者：Ping Yang
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第4期
- microano electronic manufacturing;
- key issue;
- overview;
2.Preparation of TiO_2/fly-ash cenospheres photocatalyst and its application of methylene blue degradation combining with the ultrasonic treatment

机译：TiO_2 /粉煤灰空心微球光催化剂的制备及其在亚甲基蓝降解中的应用及超声处理
- 作者：Li Chunxiang;Huo Pengwei;Yan Yongsheng;Huang Weihong;Li Songtian
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第4期
3.Two-step linear elastic finite element analysis: a new approach for evaluating fracture toughness for CNT specimens

机译：两步线性弹性有限元分析：评估CNT样品断裂韧性的新方法
- 作者：R.N. Ibrahim;R. Das;F.W. Wu;R.K. Singh Raman
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第4期
- stress intensity factor;
- SIF;
- finite element analysis;
- fracture toughness testing;
- CNT test;
4.An intelligent multi-layer net routing method based on minimum spanning tree

机译：基于最小生成树的智能多层网络路由方法
- 作者：Wei Qiu;Ping Yang
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第4期
- multi-layer net routing;
- tabu-ant colonies hybrid modelling;
- optimal path;
- VLSI physical design;
5.An improved artificial immune algorithm for mechanism kinematic chain isomorphism identification

机译：一种改进的人工免疫算法进行机构运动链同构识别
- 作者：Kehan Zeng;Ping Yang;Wei Qiu
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第4期
- mechanism kinematic chain isomorphism;
- adjacency matrix;
- artificial immune system;
- AIS;
- clonal selection;
- saving and updating operator;
6.A Taguchi method application for the part routing selection in generalised group technology

机译：Taguchi方法在广义群技术中零件路径选择中的应用
- 作者：Wafik Hachicha;Faouzi Masmoudi;Mohamed Haddar
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第4期
- cellular manufacturing;
- CM;
- cell formation;
- CF;
- alternative routings;
- generalised group technology;
- GT;
- route selection problem;
- taguchi method;
- analysis of variance;
- ANOVA;
- sensitivity analysis;
7.Microstructure Evolution Based Acceleration Factor Determination For Snagcu Solder Joints During Thermal Cycling

机译：Snagcu焊点热循环过程中基于微结构演化的加速因子确定
- 作者：Krishna Tunga;Suresh K. Sitaraman
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
8.Accelerated Aging And Thermal-mechanical Fatigue Modelling Of Cu-plated Through Holes With Partial Solder Filling

机译：局部填充焊料的镀铜通孔的加速时效和热机械疲劳建模
- 作者：Donald F. Susan;Alice C. Kilgo;Michael K. Neilsen;Paul T. Vianco
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
- fatigue;
- metallography;
- copper;
- electroplated;
- vias;
- solder;
- au;
- finite element analysis;
- fea;
- thermal cycle;
- cracking;
9.Impact Of Miniaturisation On Solder Joint Reliability

机译：小型化对焊点可靠性的影响
- 作者：M. Erinc;P.J.G. Schreurs;M.G.D. Geers
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
- lead free;
- miniaturisation;
- solder reliability;
- solder shape;
10.Fracture Toughness Characterisation Of Electronic Materials And Interfaces

机译：电子材料和界面的断裂韧性表征
- 作者：H. Hosokawa;A.V. Desai;M.A. Haque
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
- thin films;
- fracture toughness;
- micro-electro-mechanical systems;
- mechanical testing;
- silicon carbide;
11.Reliability Of Pwb Microvias For High Density Package Assembly

机译：Pwb微型通孔在高密度封装组装中的可靠性
- 作者：Reza Ghaffarian
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
12.Damage Mechanics Of Solder Joints - Viscoplasticity, Implementation, Simulation, And Verification

机译：焊点的损伤机理-粘塑性，实现，模拟和验证
- 作者：Zhengfang Qian
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
13.Thermomigration In Lead-free Solder Joints

机译：无铅焊点中的热迁移
- 作者：Mohd F. Abdulhamid;Shidong Li;Cemal Basaran
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
- thermomigration;
- lead-free;
- hardness;
- grain coarsening;
- vacancy migration;
14.Preface

机译：前言
- 作者：Leila Ladani
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
15.Effects Of Radiation Damage In Gan And Related Materials

机译：赣及相关材料对辐射损伤的影响
- 作者：S.J. Pearton;A.Y. Polyakov
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
- gan;
- radiation damage;
- traps;
- neutrons;
- protons;
- electrons;
- gamma rays;
- high electron mobility transistors;
- hemts;
- light-emitting diodes;
- leds;
- mobility;
16.Thermodynamic Framework For Coupling Of Elasto-viscoplasticity And Nonlocal Anisotropic Damage For Microelectronics Solder Alloys

机译：微电子焊料合金的弹粘塑性和非局部各向异性损伤耦合的热力学框架
- 作者：Rashid K. Abu Al-Rub
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
- nonlocal damage;
- anisotropic damage;
- viscoplasticity;
- heterogeneous media;
- length scale;
17.Estimating Fatigue Damage Model Constants With Maximum Likelihood Method

机译：用最大似然法估算疲劳损伤模型常数
- 作者：Leila J. Ladani
- 期刊名称：《International journal of materials and structural integrity》 | 2008年第2期
- maximum likelihood;
- coffin-manson;
- damage modelling;
- reliability;
- solder joints;
18.Research on deburring technology for cross hole on automobile brake master cylinder

机译：汽车制动总泵横孔去毛刺技术的研究
- 作者：Haiyan Hu;Chunlin Tian;Jiandong Yang
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- automobile brake master cylinder;
- deburring;
- fatigue fracture;
- fluid-impact;
19.Research on the cable routing optimisation by hybrid intelligent water drop algorithm

机译：基于混合智能水滴算法的电缆布线优化研究
- 作者：Chunquan Li;Ming Zhang;Yuling Shang;Yuwei Hu
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- cable routing;
- optimisation;
- intelligent algorithm;
20.Experimental study on hardness property improved by PWHT of AA-7075-T6 welded by FSW process

机译：FSW工艺焊接AA-7075-T6的PWHT改善硬度的实验研究
- 作者：Mohamed Khatir;Mustapha Temmar;Hadji Mohamed
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- post-weld heat treatment;
- friction stir welding;
- AA-7075-T6;
- Vickers hardness;
- microstructure;
21.Effect of gap on vertical deformation and deterioration stress of CRTS-I ballastless track

机译：间隙对CRTS-I无ball轨道垂直变形和劣化应力的影响
- 作者：Cuiying Yu;Jun Xiang;Yang Zhou;Jianhong Mao;Kai Gong
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- railway engineering;
- ballastless track;
- gap;
- deformation;
- deterioration stress;
22.Microscopic characteristics of the methane occurrence state in coal

机译：煤中甲烷发生状态的微观特征
- 作者：Zhian Huang;Zhenzhen Ma;Rui Yang;Yukun Gao;Yinghua Zhang;Xuejiao Gong
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- pore structure;
- adsorption-desorption;
- methane;
- electrical parameters;
23.Impact of Mg doping contents on the n-type and p-type ZnO by first-principles calculations

机译：第一性原理计算Mg掺杂量对n型和p型ZnO的影响
- 作者：Yanfang Zhao;Wei Ding;Hongchang Wang;Qiao Dai
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- Mg doping;
- band structure;
- optical properties;
- p-type ZnO;
- first-principles;
24.A new method of forced vibration problem of deep beams under distributed harmonic load

机译：分布谐波荷载下深梁强迫振动问题的一种新方法
- 作者：Yingjie Chen;Yingwei Song;Jianxun Yang;Teng Teng
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- deep beam;
- distributed harmonic load;
- forced vibration;
- reciprocal method;
- deflection equation;
25.Neural prediction of concrete compressive strength

机译：混凝土抗压强度的神经预测
- 作者：Saha Dauji
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- compressive strength;
- concrete;
- prediction;
- artificial neural networks;
- modular ANN;
26.Physiochemical characterisation of Malaysian white aggregate for use in sustainable concrete structure

机译：用于可持续混凝土结构的马来西亚白色骨料的理化特性
- 作者：M.Z.H. Khan;M. Zahid Hossain Khan;Md. Rafiul Hasan;Md. Arifur Rahman;Md. Abu Naser Shatez
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- stone aggregates;
- physiochemical properties;
- microstructure;
- wet chemistry;
27.Operation optimisation of urban rail transit train base on energy saving

机译：基于节能的城市轨道交通列车运行优化
- 作者：Fuyun Liu;Jianwei Wu;Zhicong Zhang;Hao Lu;Kuan Li
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- urban rail transit;
- energy saving;
- operation optimisation;
- SQP algorithm;
- MATLAB;
28.Effect of aluminising on the low cycle fatigue life of a directionally solidified nickel-base alloy used for manufacturing turbine blade

机译：渗铝对用于制造涡轮叶片的定向凝固镍基合金低循环疲劳寿命的影响
- 作者：Benudhar Sahoo;S.K. Panigrahi;Shri R.K. Satpathy
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- low cycle fatigue;
- LCF;
- directionally solidified;
- DS;
- aluminising;
- diffusion;
- fractography;
29.Means of protecting materials from spontaneous coal combustion: current developments, mechanisms, classifications, and prospects

机译：保护材料免于自燃的手段：当前的发展，机制，分类和前景
- 作者：Zhian Huang;Shanlin Xiao;Wei Lu;Yukun Gao;Yinghua Zhang;Hui Wang
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- spontaneous coal combustion;
- damage;
- materials;
- mechanism;
- research status;
- criteria;
30.AHP coupled multi-criteria decision making approach for selection of carbon nanotube applied in mechanical engineering under grey-environment

机译：灰色环境下机械工程中碳纳米管选择的AHP耦合多准则决策方法
- 作者：Syed Abou lltaf Hussain;Syeda Shamim Shabnam;Uttam Kumar Mandal;Sankar Prasad Mondal
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
31.Optimisation design and structure analysis of large-scale prestressed rectangular aqueduct

机译：大型预应力矩形渡槽优化设计与结构分析
- 作者：Wen-Liang Ma;Xin-Li Bai
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- south-to-north water diversion project;
- aqueduct;
- optimisation design;
- finite element;
- force analysis;
- stress distribution;
32.Nonlinear finite element analysis of steel lined reinforced concrete penstock laid on downstream surface of dam

机译：大坝下游面衬砌钢筋混凝土压力管道的非线性有限元分析
- 作者：Wen-liang Ma;Xiao-fen Li
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第3期
- steel lined reinforced concrete;
- penstock;
- nonlinear finite element;
- bearing ratio;
- stress distribution;
33.Analyses and experimental study about impact damage of COPV

机译：COPV冲击损伤的分析与实验研究
- 作者：Daolian Wang;Chuanjun Liao;Wenqiang Li;Haoran Lu
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第4期
- carbon fibre;
- composite overwrapped pressure vessel;
- COPV;
- impact damage;
- FE model;
34.Response of cylindrical tube under blast: experiment and numerical simulation

机译：爆炸条件下圆柱管的响应：实验与数值模拟
- 作者：Anil Kumar Upadhyay;C. Ramdas;K.R.Y. Simha
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第4期
- cylindrical tube;
- TNT;
- blast load;
- CONWEP;
- experimental measurement of strain;
- average pressure near blast;
- numerical simulation;
- rosette;
- accelerometer;
35.Characterisation of electromechanical response of forehead tissues due to fluid impact during shirodhara treatment

机译：Shirodhara治疗过程中由于液体冲击而引起的额头组织机电响应的表征
- 作者：Swathika Meenraj;Chebolu Lakshmana Rao;Venkatesh Balasubramanian
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第4期
- fluid impact;
- ayurveda;
- shirodhara;
- piezoelectric plate;
- elastic foundation;
- static load;
- electromechanical;
- displacement;
- stress;
- voltage;
36.Fatigue life cycle estimation and reliability analysis of hydraulic plumbing of a launch vehicle control actuator

机译：运载火箭控制执行器液压管道的疲劳寿命周期估算与可靠性分析。
- 作者：V. Murugesan;P.S. Sreejith;Shashi Bhushan Tiwari;K. Kumar
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第4期
- fatigue analysis;
- hydraulic plumbing;
- mean stress;
- alternating stress;
- endurance strength;
- fatigue life cycle;
37.Influence of piezoelectric parameters on admittance diagnostic signals for structural health monitoring: a numerical study

机译：压电参数对结构健康监测导纳诊断信号的影响：数值研究
- 作者：Akshay S.K. Naidu;Vinay Pittala
- 期刊名称：《International journal of materials and structural integrity》 | 2018年第4期
- structural health monitoring;
- SHM;
- piezoelectric material;
- lead zirconate titanate;
- PZT;
- electromechanical impedance;
- EMI;
- admittance signatures;
- coupled field FE analysis;
38.Nonlinear analysis of FGM plates using generalised higher order shear deformation theory

机译：基于广义高阶剪切变形理论的FGM板非线性分析
- 作者：Singam Srividhya;Basant Kumar;R.K. Gupta;Amritham Rajagopal
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- functionally graded plates;
- nonlinear analysis;
- GHSDT;
- rule of mixtures;
- power law;
39.Higher order Hermite enriched contact finite elements for adhesive contact problems

机译：高阶Hermite富集的接触有限元解决了胶粘剂接触问题
- 作者：Vishal Agrawal;Sachin Singh Gautam
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- adhesion;
- computation contact mechanics;
- enriched finite elements;
- nonlinear finite element analysis;
- Hermite polynomials;
40.Comparative study of algorithms to handle geometric and material nonlinearities

机译：处理几何和材料非线性的算法的比较研究
- 作者：Shantanu Shashikant Mulay;R. Udhayaraman;M. Anas
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- generalised displacement control;
- GDC;
- displacement control method;
- DCM;
- direct displacement control method;
- DDCM;
- inhomogeneous deformation;
- ID;
41.Wavelet-based finite element simulation of guided waves containing harmonics

机译：基于小波的含谐波导波有限元模拟
- 作者：Ambuj Sharma;Sandeep Kumar;Amit Tyagi;Kumar Kaushik Ranjan
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- non-standard wavelet operator;
- finite element method;
- higher harmonics;
- lamb wave;
- structural health monitoring;
42.A new 3D finite element for the finite deformation of nearly incompressible hyperelastic solids

机译：一种新的3D有限元，用于几乎不可压缩的超弹性固体的有限变形
- 作者：Ashutosh Bijalwan;B.P. Patel
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- incompressible;
- locking;
- finite deformation;
- J-Bar method;
- Neo-Hookean rubber;
43.Filler shape and volume fraction effect on dynamic compression behaviour of glass filler reinforced epoxy composites

机译：填料的形状和体积分数对玻璃填料增强的环氧复合材料的动态压缩行为的影响
- 作者：Sarthak S. Singh;Venkitanarayanan Parameswaran;Rajesh Kitey
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- particulate reinforced epoxy composite;
- dynamic compression;
- split Hopkinson pressure bar;
- SHPB;
44.Effect of obliquity on ballistic impact response of plain-woven fabric

机译：倾角对平纹织物弹道冲击响应的影响
- 作者：Kuldeep Yadav;A.K. Upadhyay;K.K. Shukla
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- plain-woven fabric;
- ballistic impact;
- obliquity;
- Kevlar;
45.Mixed mode stress intensity factors of slanted edge cracked plate with hole subjected to various in-plane loadings using XFEM

机译：使用XFEM的斜裂纹多孔板在多种平面载荷下的混合应力强度因子。
- 作者：Khubilal Khatri;Achchhe Lal
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
46.Numerical investigation of crack growth in AISI type 316LN stainless steel weld joint using GTN damage model

机译：基于GTN损伤模型的AISI 316LN不锈钢焊接接头裂纹扩展的数值研究。
- 作者：N. Sai Deepak;C. Lakshmana Rao;S.A. Krishnan;G. Sasikala;Raghu V. Prakash
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
47.Crystal plasticity-based creep model for solution-strengthened nickel-based alloys

机译：固溶镍基合金的基于晶体塑性的蠕变模型
- 作者：Pritam Chakraborty;Wen Jiang
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- crystal plasticity;
- creep;
- finite element method;
- FEM;
- alloy 617;
48.Cyclic electromechanical response of poly(vinylidene fluoride)

机译：聚偏二氟乙烯的循环机电响应
- 作者：L. Harish;C. Lakshmana Rao
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- poly(vinylidene fluorid);
- PVDF;
- cyclic loading;
- non-contact speckle method;
- electromechanical response;
- piezo sensor;
49.Effect of soot on tribological properties of steel and ceramic contacts

机译：烟尘对钢和陶瓷触点摩擦学性能的影响
- 作者：Yadvendra Kaushik;P. Ramkumar
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- ceramic;
- friction;
- soot;
- wear;
- zirconia;
50.Experimental characterisation of leak through elastomer-metal interface

机译：通过弹性体-金属界面泄漏的实验表征
- 作者：Kambhammettu Sri Krishna Sudhamsu;C. Lakshmana Rao;Abhijit P. Deshpande;Jithin Devan
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第3期
- elastomeric;
- seals;
- leak;
- failure;
- prediction of leak;
- elastomer-metal interface;
- modelling;
- experimentation;
51.Triaxial tests on weak planes damage of hard brittle shale of Longmaxi formation in South Sichuan Basin, China

机译：四川盆地南部龙马溪组硬脆性页岩弱面破坏三轴试验
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第4期
- shale;
- triaxial tests;
- rock mechanics;
- weak plane;
52.Modelling and characterisation of a magneto-rheological elastomer isolator device under impact loadings using interpolated multiple adaptive neuro fuzzy inference system structure

机译：内插多重自适应神经模糊推理系统结构在冲击载荷下的磁流变弹性体隔离器的建模与表征
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第4期
- magneto-rheological elastomer;
- isolator device;
- impact loading;
- adaptive neuro-fuzzy inference system;
- ANFIS;
- Bouc-Wen MRE modelling;
53.Study on the adsorption of methylene blue by NaOH KH550 modified bagasse

机译：NaOH KH550改性蔗渣吸附亚甲基蓝的研究。
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第4期
- bagasse;
- coupling reagent;
- characterisation;
- methylene blue;
- adsorption;
54.Effect of high temperature on fly ash-based alkali activated concrete compared to Portland cement concrete

机译：与硅酸盐水泥混凝土相比，高温对粉煤灰基碱活化混凝土的影响
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第4期
55.Environment friendly milling of Inconel-625

机译：Inconel-625的环保研磨
- 期刊名称：《International journal of materials and structural integrity》 | 2019年第4期
56.Flexural fatigue analysis of fibre reinforced polymer concrete composites under non-reversed loading

机译：非反转载荷下纤维增强聚合物混凝土复合材料的抗弯疲劳分析
- 作者：R. Bedi;S.P. Singh
- 期刊名称：《International journal of materials and structural integrity》 | 2020年第1期
- polymer concrete composites;
- fatigue;
- Weibull distribution;
- statistical properties/methods;
57.A new simple formulation for instantaneous coil diameter of a SMA helical spring

机译：用于SMA螺旋弹簧的瞬时线圈直径的新简单配方
- 作者：R. Santhanam;Srinivasan M. Sivakumar;Y. Krishna
- 期刊名称：《International journal of materials and structural integrity》 | 2020年第1期
- shape memory alloy;
- SMA;
- helical coil tension springs;
- instantaneous coil diameter;
- large deflection;
58.Effects of two-step heat treatment on the structure of cotton-derived activated carbon fibres

机译：两步热处理对棉衍生的活性炭纤维结构的影响
- 作者：Tsuyoshi Yoda;Keita Shibuya;Kazuma Miura;Hideki Myoubudani
- 期刊名称：《International journal of materials and structural integrity》 | 2020年第1期
- activated carbon fibre;
- ACF;
- scanning electron microscope;
- thermal treatment;
- activation;
- pore structure;
59.Compressive strength enhancement of concrete using fly ash as a partial replacement of fine aggregate and model development

机译：使用粉煤灰作为细聚集和模型开发的粉煤灰的混凝土压缩强度增强
- 作者：H.M.A. Mahzuz;Md. Jahid Hasan
- 期刊名称：《International journal of materials and structural integrity》 | 2020年第1期
- concrete;
- fly ash;
- waste;
- compressive strength;
- elasticity;
- nonlinear regression;
60.Mechanics of contact interaction and deformation of main pipelines in the conditions of extreme external actions

机译：极端外部行动条件下主要管道的接触相互作用和变形的机制
- 作者：Nikolay Makhutov;Mikhail Gadenin;Alexander Cherniavsky;Oleg Cherniavsky;Vladimir Nadein
- 期刊名称：《International journal of materials and structural integrity》 | 2020年第1期
- structural material;
- deformation;
- strength;
- contact interaction;
- pipeline integrity;
- seismic steadiness;
- modelling;
- finite element method;
61.Changing the physical, chemical properties of alkaline soil stabilised with industrial waste material tile dust

机译：用工业废料瓷砖灰尘稳定碱性土壤的物理，化学性质
- 作者：Jasbir Saini;Dharmender Kumar Soni;A.K. Mandal
- 期刊名称：《International journal of materials and structural integrity》 | 2020年第1期
- Kurukshetra;
- tile dust;
- alkaline soils;
- admixture;
- California bearing ratio test;
- CBR;
- unconfined compression tests;
- UCS;
- optimum moisture;
- CSSRI lab;
- chemical test;
- construction work;
62.From fatigue and tribology to tribo-fatigue

机译：From fatigue and tribology to tribo-fatigue
- 作者：Leonid A. Sosnovskiy;Sergei S. Sherbakov;Michael M. KhonsariAlexander V. Bogdanovich
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期
- tribo-fatigue system;
- wear-fatigue damage;
- stress-strain state;
- limiting state: damage state;
- dangerous volume;
- interaction;
- irreversible damage;
63.Concrete mix using tertiary treated wastewater and effect of ambient and elevated temperatures on its properties

机译：Concrete mix using tertiary treated wastewater and effect of ambient and elevated temperatures on its properties
- 作者：Ammar Ben Nakhi;Jasem M. Alhumoud
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期
- tertiary treated wastewater;
- potable water;
- concrete strength;
- flexural strength;
- elevated temperature;
- air content;
- density of concrete;
64.Brief introduction and recent development on the manufacture of aluminium alloy integral panels in aerospace applications

机译：Brief introduction and recent development on the manufacture of aluminium alloy integral panels in aerospace applications
- 作者：Duanzhi Wang;Fen Xu;Lejian YuanDong ZhangJiachen LiuYong HuHuifeng KangQiusheng MaYang TongWenzhong Han
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期
- aluminium alloys: integral panels: manufacture: shot peening;
- CAF;
- creep age forming;
65.On the development of tribo-fatigue as the new section of mechanics

机译：On the development of tribo-fatigue as the new section of mechanics
- 作者：Sergei S. Sherbakov;Cemal Basaran
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期
- tribo-fatigue;
- friction;
- wear;
- mechanical fatigue;
- stress strain state;
- damage;
- entropy;
- mechanothermodynamics;
66.Ultrasonically enhanced flow rate of polymer melt extrusion

机译：Ultrasonically enhanced flow rate of polymer melt extrusion
- 作者：Matthew D. Moles;Anish Roy;Vadim V. Silberschmidt
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期
- low-intensity vibration: ultrasound;
- polymer flow;
- finite element;
- injection moulding;
- transducer: piezoceramic;
- polypropylene;
- extrusion;
- thermal analysis;
67.Effect of cryotreated electrodes on the machining efficiency of titanium alloy during EDM: a comparative study

机译：Effect of cryotreated electrodes on the machining efficiency of titanium alloy during EDM: a comparative study
- 作者：Munmun Bhaumik;Kalipada Maity
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期
68.Thermodynamics of continua with complex rheology

机译：Thermodynamics of continua with complex rheology
- 作者：Evgenii V. Murashkin;Alexander V. Manzhirov
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期
- least action;
- dissipative potential;
- elasticity;
- plasticity;
- creep;
- yield criterion;
69.Numerical investigation of the effect of fibre volume fraction on the stress distribution of aerospace grade Al-Li 8090 metal matrix composite

机译：Numerical investigation of the effect of fibre volume fraction on the stress distribution of aerospace grade Al-Li 8090 metal matrix composite
- 作者：Abhaysingh M. Daphale;Chetan S. Patil;Mohd. Imran AnsariDineshsingh G. Thakur
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期
- Al-Li (8090) alloy;
- SiC fibre;
- MMC;
- metal matrix composite;
- RVE;
- representative volume element;
- FEM;
- finite element method;
- modified stir casting;
- strengthening mechanism;
- square array;
- hexagonal array;
70.Optimisation design of microstrip-line structure based on the response surface method and genetic algorithm

机译：Optimisation design of microstrip-line structure based on the response surface method and genetic algorithm
- 作者：Chunyue Huang;Chao Gao;Genxin HuangLiangkun Lu
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期
71.Shear surface wave propagation in stratified media with slip interfaces

机译：Shear surface wave propagation in stratified media with slip interfaces
- 作者：K.B. Ghazaryan;V.V. Mozharovsky;S.V. SarkisyanS.K. Ohanyan
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期
72.Comparative study of the brittle-ductile transition between level ice and rafted ice based on uniaxial compression experiments

机译：Comparative study of the brittle-ductile transition between level ice and rafted ice based on uniaxial compression experiments
- 作者：Xiaodong Chen;Anliang Wang;Shunying Ji
- 期刊名称：《International journal of materials and structural integrity》 | 2021年第4期

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号