首页>外文期刊>一般工业技术>International journal of design engineering

International journal of design engineering

中文名称：国际设计工程杂志

ISSN：1751-5874
出版周期：Quarterly

发文量：157

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Non-linear thermo-elastic response of symmetric cross-ply laminated composite conical panels with temperature dependent material properties

机译：具有温度相关材料特性的对称交叉层压复合锥形面板的非线性热弹性响应
- 作者：R.M. Joshi
- 期刊名称：《International journal of design engineering》 | 2009年第2期
- laminated composite conical panel;
- non-linear thermo-elastic response;
- finite element approach;
2.Study of damping in layered and jointed welded structures

机译：分层和联合焊接结构的阻尼研究
- 作者：Bhagat Singh;B.K. Nanda
- 期刊名称：《International journal of design engineering》 | 2009年第2期
3.Vibration signature analysis of high speed unbalanced rotating shaft supported on ball bearings

机译：球轴承支承的高速不平衡旋转轴的振动特征分析
- 作者：S.H. Upadhyay;S.P. Harsha;S.C. Jain
- 期刊名称：《International journal of design engineering》 | 2009年第2期
- vibration signature analysis;
- high speed unbalanced rotating shaft;
- ball bearings;
- frequency spectra;
- non-linear vibration;
- chaos;
- poincare map;
4.Discrete optimisation of a gear train using biogeography based optimisation technique

机译：使用基于生物地理学的优化技术对齿轮系进行离散优化
- 作者：V.J. Savsani;R.V. Rao;D.P. Vakharia
- 期刊名称：《International journal of design engineering》 | 2009年第2期
- discrete optimisation;
- biogeography-bascd optimisation;
- BBO;
- particle swarm optimisation;
- PSO;
- differential evolution;
- DE;
- genetic algorithm;
- gear train design;
5.Effect of cone angle and length of the slot on the performance of feed slot conical air bearing

机译：锥角和槽长对进料槽锥形空气轴承性能的影响
- 作者：S.T. Chavan;B.B. Ahuja
- 期刊名称：《International journal of design engineering》 | 2009年第2期
- externally-pressurised conical air bearings;
- cone angle;
- feed slot;
- slot length;
- load capacity;
- stiffness;
6.Mechanical engineering design optimisation using modified harmony elements algorithm

机译：机械工程设计的改进和声元算法优化
- 作者：R.V. Rao;D.P. Vakharia;V.J. Savsani
- 期刊名称：《International journal of design engineering》 | 2009年第2期
7.Editorial

机译：社论
- 作者：D. Millet;D. Brissaud;C. McMahon;C. Herrmann;A. Aoussat
- 期刊名称：《International journal of design engineering》 | 2009年第3期
8.An integrated analysis of customer value and environmental burden for environmentally conscious design

机译：对具有环境意识的设计的客户价值和环境负担的综合分析
- 作者：Koji Kimita;Yoshiki Shimomura;Tomohiko Sakao;Tatsunori Hara;Tamio Arai
- 期刊名称：《International journal of design engineering》 | 2009年第3期
9.How to identify the most promising areas of environmental improvement at the early stages of the design process?

机译：在设计过程的早期阶段，如何确定最有希望的环境改善领域？
- 作者：Dominique Millet;Nicolas Tchertchian;Daniel Brissaud
- 期刊名称：《International journal of design engineering》 | 2009年第3期
- ecodesign;
- eco-innovation;
- improvement tool;
- product design guideline;
- design engineering;
10.The limits of current evaluation methods in a context of sustainable design: prudence as a new framework

机译：在可持续设计的背景下当前评估方法的局限性：审慎作为新框架
- 作者：Carmela Cucuzzella
- 期刊名称：《International journal of design engineering》 | 2009年第3期
- design engineering;
- sustainable design;
- ecodesign;
- efficiency;
- sufficiency;
- precaution principle;
- assessment methods;
- prudence;
- prevention principle;
11.Total performance design of product life cycle considering future uncertainties

机译：考虑未来不确定因素的产品生命周期的总体性能设计
- 作者：Shinsuke Kondoh;Nozomu Mishima;Keijiro Masui;Mitsutaka Matsumoto
- 期刊名称：《International journal of design engineering》 | 2009年第3期
- product life cycle;
- future uncertainties;
- robust design method;
- total performance;
- Taguchi's method;
- environmental toad;
- product value;
- life cycle cost;
- LCC;
- life cycle options;
- LCOPs;
- reuse;
- recycling;
12.Study of an exergy method for environmental evaluation assessment in the early design phase using comparative LCA and exergy approach

机译：使用比较性LCA和火用法研究早期设计阶段的火用法用于环境评估的方法
- 作者：Galina Medyna;Harri Nordlund;Eric Coatanea
- 期刊名称：《International journal of design engineering》 | 2009年第3期
- exergy;
- environmental evaluation analysis;
- life cycle assessment;
- LCA;
- validation;
13.A liaison model for disassembly-reassembly product ecodesign

机译：拆装产品生态设计的联络模型
- 作者：Christian Mascle;Ke Xing
- 期刊名称：《International journal of design engineering》 | 2009年第3期
- ecodesign;
- environment-friendly manufacturing;
- design methodology;
- assembly-disassembly;
- upgradability;
- subassembly;
- half degree of liaison;
- fuzzy logic;
- pseudomatrices;
14.Editorial

机译：社论
- 作者：Marc Zolghadri;Claudia Eckert
- 期刊名称：《International journal of design engineering》 | 2009年第4期
15.A product-model supporting coupling's management during microproduct design

机译：在微型产品设计中支持耦合管理的产品模型
- 作者：M. Museau;A. De Grave;C. Masclet;H. Paris
- 期刊名称：《International journal of design engineering》 | 2009年第4期
- microproducts;
- integrated design;
- product-model;
- MEMS RF switch;
16.Challenges in identifying the knock-on effects of engineering change

机译：识别工程变更的连锁效应所面临的挑战
- 作者：Owolabi O. Ariyo;Claudia M. Eckert;P. John Clarkson
- 期刊名称：《International journal of design engineering》 | 2009年第4期
- engineering change management;
- change propagation paths;
- change prediction;
17.Propagating product architecture decisions onto the project organisation: a comparison between two methods

机译：将产品架构决策传播到项目组织中：两种方法之间的比较
- 作者：Eric Bonjour;Maryvonne Dulmet;Samuel Deniaud;Jean-Pierre Micaeelli
- 期刊名称：《International journal of design engineering》 | 2009年第4期
- product architecture;
- project organisation;
- design team;
- design structure matrix;
- DSM;
- domain mapping matrix;
- DMM;
18.The impact of NPD projects on supply chain complexity: an empirical research

机译：NPD项目对供应链复杂性的影响：一项实证研究
- 作者：Maria Caridi;Margherita Pero;Andrea Sianesi
- 期刊名称：《International journal of design engineering》 | 2009年第4期
- product innovation;
- process innovation;
- supply chain management;
- SCM;
19.Design for manufacture: the case of concurrent mould and part design in injection moulding

机译：制造设计：在注塑成型中同时进行模具和零件设计的情况
- 作者：Laurence Meylheuc;Virginie Goepp
- 期刊名称：《International journal of design engineering》 | 2009年第4期
- injection moulding;
- concurrent engineering;
- mould design;
- part design;
- computer aided design;
- CAD;
- computer aided engineering;
- CAE;
- design for X;
- DFX;
- design for manufacture;
- DFM;
20.A new Bayesian technique for readjusting LOLIMOT models: example with diesel engine emissions

机译：用于调整LOLIMOT模型的新贝叶斯技术：以柴油机排放为例
- 作者：Sebastien Castric;Zohra Cherfi;Nassim Boudaoud;Paul Schimmerling
- 期刊名称：《International journal of design engineering》 | 2009年第4期
- vehicles design;
- optimisation;
- Bayesian theory;
- LOLIMOT models;
- change management;
21.Topology tailoring for relaxing thermal-stress concentration in heat resisting heterogeneous material objects

机译：拓扑剪裁可缓解耐热异质材料对象中的热应力集中
- 作者：Yi Yang;Anping Xu;Yunxia Qu;Yuhong Liu
- 期刊名称：《International journal of design engineering》 | 2008年第2期
- functional components;
- heterogeneous material object;
- FEA;
- thermal-stress;
- heat resisting;
- topology optimisation;
- ESO algorithm;
22.The design of enhanced online condition monitoring systems for turning processes

机译：用于车削过程的增强型在线状态监控系统的设计
- 作者：Abdulrahman Al-Azmi;Amin Al-Habaibeh
- 期刊名称：《International journal of design engineering》 | 2008年第2期
- condition monitoring;
- turning;
- tool wear;
- vibration;
- acoustic emission;
- strain;
- signal processing;
- artificial intelligence;
23.Integration of product data management and CAD systems by Java-COM bridge

机译：通过Java-COM桥集成产品数据管理和CAD系统
- 作者：Lin Lin;Yong Shi;Guolei Wang
- 期刊名称：《International journal of design engineering》 | 2008年第2期
- product data management;
- CAD systems;
- real-time data exchange;
- dead-cycle detection;
24.International Journal of Design Engineering

机译：国际设计工程杂志
- 期刊名称：《International journal of design engineering》 | 2008年第2期
25.Creative design tools (CDT): stimulating creative design thinking

机译：创意设计工具（CDT）：激发创意设计思维
- 作者：Feda Salah;Hassan Abdalla
- 期刊名称：《International journal of design engineering》 | 2008年第2期
26.Design enhancement of thin-walled steel beams with improved stiffness and reduced weight

机译：改进薄壁钢梁的设计，提高刚度并减轻重量
- 作者：Yucheng Liu
- 期刊名称：《International journal of design engineering》 | 2008年第2期
- design optimisation;
- thin-walled beam;
- structural analysis;
- reduced weight;
- stiffness;
- rib stiffener;
27.Knowledge base for controlled cost and quality of finite element modelling

机译：有限元建模的成本和质量可控的知识库
- 作者：Emmanuel Bellenger;Yassine Benhafid;Nadege Troussier
- 期刊名称：《International journal of design engineering》 | 2008年第2期
- finite element analysis;
- FEA;
- knowledge base;
- reusability;
- design of experiments;
- mesh generation;
28.Concept selection methods - a literature review from 1980 to 2008

机译：概念选择方法-1980年至2008年的文献综述
- 作者：Guel E. Okudan;Shafin Tauhid
- 期刊名称：《International journal of design engineering》 | 2008年第3期
- concept selection;
- multi-criteria decision-making;
- uncertainty modelling;
29.Using axiomatic design principles for designing a simple and innovative product: a case study

机译：使用公理化设计原则设计简单创新的产品：案例研究
- 作者：P.N. Botsaris;K.P. Anagnostopoulos;O. Demesouka
- 期刊名称：《International journal of design engineering》 | 2008年第3期
- axiomatic design;
- AD;
- design principles;
- mechanical product design;
- innovative product;
- case study;
30.Research on product combinatorial design based on functional similarity

机译：基于功能相似度的产品组合设计研究
- 作者：Fang Liu;Bojun Yang;Zhonghang Bai;Runhua Tan
- 期刊名称：《International journal of design engineering》 | 2008年第3期
- combinatorial design;
- functional similarity;
- product variety;
- customisation;
- modular design;
- interface;
31.Experimentally exploring the benefits of augmented reality technology in design conceptualisation

机译：通过实验探索增强现实技术在设计概念化中的好处
- 作者：Xiangyu Wang;Jingyu Chen;Hao Zhou
- 期刊名称：《International journal of design engineering》 | 2008年第3期
- augmented reality;
- collaborative design;
- conceptual design;
- design process;
- visualisation;
- virtual environment;
- virtual reality;
32.Kinematics analysis of a novel parallel platform with passive constraint chain

机译：具有被动约束链的新型并联平台的运动学分析
- 作者：Bing Li;Xiaojun Yang;Ying Hu
- 期刊名称：《International journal of design engineering》 | 2008年第3期
- parallel mechanism;
- full Jacobian matrix;
- dexterity;
33.Editorial

机译：社论
- 作者：Doru Talaba;E. Ilhan Konukseven
- 期刊名称：《International journal of design engineering》 | 2008年第4期
34.A new micro-fabrication process simulator for micro-electro-mechanical system (MEMS) designs

机译：用于微机电系统（MEMS）设计的新型微加工过程模拟器
- 作者：Alper Yildirim;Melik Dolen
- 期刊名称：《International journal of design engineering》 | 2008年第4期
- wet etching;
- anisotropic etching;
- doping;
- cellular automata;
- micro-fabrication simulation;
- material deposition;
- isotropic etching;
- dry etching;
- deep reactive ion etching;
35.Virtual prototyping in design of synchronous belts drives

机译：同步皮带传动设计中的虚拟样机
- 作者：Silviu Butnariu;Doru Talaba
- 期刊名称：《International journal of design engineering》 | 2008年第4期
- virtual prototyping;
- synchronous;
- timing belt;
- FEA;
- multi-body;
- belts drive;
36.Computerised cutting simulation of involute helical gears generated with rack cutters

机译：齿条铣刀产生的渐开线斜齿轮的计算机化切削模拟
- 作者：M. Cuneyt Fetvaci;C. Erdem Imrak
- 期刊名称：《International journal of design engineering》 | 2008年第4期
- helical gear design;
- involute;
- simulation;
- rack-type cutters;
37.Modelling of complex structures using superelements

机译：使用超元素对复杂结构进行建模
- 作者：Anton lanakiev
- 期刊名称：《International journal of design engineering》 | 2008年第4期
- finite element method;
- superelements;
- transient dynamic analysis;
- hydraulic excavator;
38.Multi-objective design optimisation of ball bearings using a modified particle swarm optimisation technique

机译：基于改进粒子群算法的球轴承多目标设计优化
- 作者：V. Savsani;R.V. Rao;D.P. Vakharia
- 期刊名称：《International journal of design engineering》 | 2008年第4期
39.Improving free form surface machining performance by ball end milling model

机译：通过球头铣削模型改善自由曲面加工性能
- 作者：A.C. Manav;E. Akgun;I. Lazoglu
- 期刊名称：《International journal of design engineering》 | 2008年第4期
40.International Journal of Agile Systems and Management (IJASM)

机译：国际敏捷系统与管理杂志（IJASM）
- 期刊名称：《International journal of design engineering》 | 2008年第4期
41.A framework for supporting intelligent and flexible workflow-based engineering design process

机译：支持基于工作流的智能和灵活工程设计过程的框架
- 作者：Dongbo Wang;Xiu-Tian Yan;William J. Ion;Runxiao Wang
- 期刊名称：《International journal of design engineering》 | 2007年第1期
- engineering design process;
- EDP;
- workflow;
- autonomic computing;
- weighted CF model;
42.Finite element prediction of tool shapes in electro-chemical machining

机译：电化学加工中刀具形状的有限元预测
- 作者：Sandeep S. Patil;Vinod Yadava
- 期刊名称：《International journal of design engineering》 | 2007年第1期
- electro-chemical machining;
- ECM;
- finite element method;
- tool design;
43.The 24 hr product: from concept to interactive model in less than a day

机译：24小时产品：在不到一天的时间内从概念到交互式模型
- 作者：Paul Johnson;R. Griffiths;Steve Gill
- 期刊名称：《International journal of design engineering》 | 2007年第1期
- product design;
- computer aided design;
- CAD;
- industrial design;
- interface ergonomics;
- design development strategies;
44.Activities in selecting materials from the perspective of product designers

机译：从产品设计师的角度选择材料的活动
- 作者：Use van Kesteren;Prabhu Kandachar;Pieter Jan Stappers
- 期刊名称：《International journal of design engineering》 | 2007年第1期
- design activity;
- product design;
- industrial design;
- materials selection;
- material selecting activities model;
- MSA model;
45.A customer-manufacturer-competitor orientation model for product life cycle analysis based on QFD, AHP/ANP and TRIZ

机译：基于QFD，AHP / ANP和TRIZ的用于产品生命周期分析的客户-制造商-竞争对手定向模型
- 作者：Jiachen Hou;Daizhong Su
- 期刊名称：《International journal of design engineering》 | 2007年第1期
- product life cycle;
- PLC;
- quality function deployment;
- analytical hierarchy process;
- AHP;
- analytical network process;
- ANP;
- TRIZ;
- ideal formulation;
- evaluation sets;
46.Multiobjective design of a vehicular structure using metamodelling and an efficient genetic algorithm

机译：基于元建模和高效遗传算法的车辆结构多目标设计
- 作者：Hongbing Fang;Qian Wang
- 期刊名称：《International journal of design engineering》 | 2007年第1期
- multiobjective;
- optimisation;
- metamodelling;
- radial basis functions;
- RBFs;
- pareto frontier;
- genetic algorithm;
- GA;
- non-dominated sorting;
- NS;
47.New concept contemporary integrated rapid prototyping system and its software implementation

机译：新概念当代集成快速原型系统及其软件实现
- 作者：Anping Xu;Yunxia Qu;Yushan Liu;Guolin Duan;Runhua Tan
- 期刊名称：《International journal of design engineering》 | 2007年第1期
- rapid prototyping;
- RP;
- integrated software system;
- model data processing;
- process planning;
- numerical control;
48.Design and prototyping of debris clean and collection system for a cylinder block assembly conveying line following an engineering systems design approach

机译：遵循工程系统设计方法的气缸体组件输送线碎片清洁和收集系统的设计和原型设计
- 作者：Yucheng Liu;Vipul Meghat;Benjamin Machen
- 期刊名称：《International journal of design engineering》 | 2018年第1期
49.Reconnoitering the suitability of fuzzified weighted decision matrix for design process of a reconfigurable assembly fixture

机译：重申模糊加权决策矩阵在可重构装配夹具设计过程中的适用性
- 作者：Olayinka Mohammed Olabanji
- 期刊名称：《International journal of design engineering》 | 2018年第1期
50.Integration of perception and emotions in a new sensory design process

机译：在新的感官设计过程中整合感知和情感
- 作者：Cyril Bertheaux;Rosario Toscano;Roland Fortunier;Cèline Borg
- 期刊名称：《International journal of design engineering》 | 2018年第1期
- perceptual evaluation;
- emotional evaluation;
- preference evaluation;
- sensory evaluation;
- product space;
- user-acceptability;
51.A method based on statistical and experimental analysis for obtaining a biologically optimal solution

机译：基于统计和实验分析的获得生物学最优解的方法
- 作者：Bibo Yang;Weiwei Yan
- 期刊名称：《International journal of design engineering》 | 2018年第1期
52.Design, development and experiential validation of large stroke welded disk bellows for nuclear industry

机译：核工业大行程焊接盘式波纹管的设计，开发和经验验证
- 作者：S.C.S.P. Kumar Krovvidi;G. Padmakumar;S. Raghupathy;A.K. Bhaduri
- 期刊名称：《International journal of design engineering》 | 2018年第1期
- prototype fast breeder reactor;
- PFBR;
- shield plug;
- inclined fuel transfer machine;
- IFTM;
- welded disc bellows;
- AM350;
- finite element analysis;
53.An intelligent computer-based framework for integrating emotions and aerodynamics in sportsbike design

机译：基于智能的基于计算机的框架，用于在运动摩托车设计中整合情绪和空气动力学
- 作者：Philip Farrugia;James Mamo;Tonio Sant
- 期刊名称：《International journal of design engineering》 | 2019年第1期
- computer-based engineering design support;
- knowledge-based systems;
- design for X;
54.Investigation on glass-epoxy composite drive shaft for light motor vehicle

机译：轻型汽车玻璃环氧复合驱动轴的研究
- 作者：Rajaram M. Shinde;Suresh M. Sawant
- 期刊名称：《International journal of design engineering》 | 2019年第1期
- composite driveshaft;
- torsional strength;
- natural frequency;
- weight minimisation;
55.Mathematical modelling of pressure distribution along the die of a biomass briquetting machine

机译：生物质团块机模具压力分布的数学模型
- 作者：Joseph Ifeolu Orisaleye;Sunday Joshua Ojolo
- 期刊名称：《International journal of design engineering》 | 2019年第1期
56.Design a single overlap support plate for bonded and weld-bonded T-peel joints

机译：设计用于粘合和焊接的T型剥离接头的单个重叠支撑板
- 作者：Wadea Ameen;A.M. Alsamhan;S.M. Darwish
- 期刊名称：《International journal of design engineering》 | 2019年第1期
- peel joint;
- bonded joint;
- weld-bonded joint;
- peel strength;
57.The design of a novel approach for the assessment of thermal insulation in buildings using infrared thermography and artificial intelligence

机译：利用红外热成像和人工智能技术评估建筑物隔热的新方法的设计
- 作者：Arijit Sen;Amin Al-Habaibeh
- 期刊名称：《International journal of design engineering》 | 2019年第1期
- insulation;
- U-value;
- artificial intelligence;
- neural network;
- infrared thermography;
58.An approach based on mean line assumption for preliminary design of turbochargers' rotors

机译：一种基于涡轮增压器转子初步设计平均线路的方法
- 作者：Lakhdar Bourabia;Mahfoudh Cerdoun;Smail Khalfallah;Taha Chettibi
- 期刊名称：《International journal of design engineering》 | 2018年第2期
- preliminary design;
- rotor;
- turbocharger;
- centrifugal compressor;
- radial turbine;
- aerodynamic performance;
- mean-line;
- CFD;
59.Design of steam production system using peat as a source of energy

机译：泥煤作为能量源的蒸汽生产系统设计
- 作者：Patrick Munyensanga;Felix Yumvuhore
- 期刊名称：《International journal of design engineering》 | 2018年第2期
- steam;
- peat;
- energy;
- Rwanda, Kabuye sugar works;
60.Design and development of novel decoupled two degree of freedom electro-hydraulic servo system for positioning heavy load

机译：新颖的设计与开发二次自由式电动液压伺服系统，用于定位重载
- 作者：Ashpana Shiralkar;Shailaja Kurode;Milind Chudgar
- 期刊名称：《International journal of design engineering》 | 2018年第2期
- decoupled two degree of freedom;
- electro-hydraulic servo system;
- EHSS;
- linear motion;
- angular motion;
61.Making 'a drop of light': an illustrative case of designing for electroluminescent material experiences

机译：制作“一滴光”：一种设计用于电致发光材料体验的说明性案例
- 作者：Bahareh Barati;Elvin Karana;Kaspar M.B. Jansen;Stan Claus
- 期刊名称：《International journal of design engineering》 | 2018年第2期
- materials innovation;
- material-driven design;
- materials experience;
- experiential characterisation;
- smart materials;
- electroluminescent;
62.Preface

机译：前言
- 作者：Amin Al-Habaibeh;Abhishek Asthana;Vladimir Vukovic
- 期刊名称：《International journal of design engineering》 | 2020年第2期
63.Computational fluid dynamics modelling to design and optimise power kites for renewable power generation

机译：可再生发电设计与优化电力风筝的计算流体动力学
- 作者：Christopher Pegg;Yatin Suri;Sheikh Zahidul Islam;Abhishek Asthana;Mamdud Hossain
- 期刊名称：《International journal of design engineering》 | 2020年第2期
- power kites;
- computational fluid dynamics;
- CFD;
- wind energy;
- renewable power generation;
- surface roughness;
- aerofoil;
- kite optimisation;
- billows;
- drag coefficient;
- lift coefficient;
64.An overview of applications of renewable energy methods in the development of structural health monitoring systems

机译：可再生能源方法在结构健康监测系统发展中的应用概述
- 作者：Faisal Siddiqui;Paul Sargent;Nashwan Dawood;Sergio Rodriguez-Trejo
- 期刊名称：《International journal of design engineering》 | 2020年第2期
65.Using ratio-weighted sums to project data into future scenarios: the case study of heating systems

机译：使用比例加权和将数据投入到未来的情况下：加热系统的案例研究
- 作者：Miquel Banchs-Pique;David J. Hutchinson;Victor M. Becerra;Mark R. Gaterell
- 期刊名称：《International journal of design engineering》 | 2020年第2期
- future scenarios;
- foresight;
- data projection;
- ratio-weighted sum;
- household energy demand;
- heating systems;
- designing resilient cities;
- DRC;
66.Assessment of an innovative floating hydro generator prototype through experiments and modelling

机译：通过实验和建模评估创新的浮动水力发电机原型
- 作者：Abhishek Asthana;Sanjay Mukherjee
- 期刊名称：《International journal of design engineering》 | 2020年第2期
- hydropower;
- water wheels;
- renewable energy;
- computational fluid dynamics;
- CFD;
67.Disinfectant chamber for killing body germs with integrated FAR-UVC chamber (for COVID-19)

机译：用集成的远UVC室杀死身体细菌的消毒室（用于Covid-19）
- 作者：Sangam Sahu;Shivam Krishna Pandey;Atul Mishra
- 期刊名称：《International journal of design engineering》 | 2021年第1期
- FAR-UVC;
- disinfectant spray;
- sanitisation chamber;
- UV light;
- sanitisation tunnel;
- infrared scanning;
- COVID 19 tunnel;
68.Coherence of interior and exterior formal qualities in parametrically designed buildings

机译：在参数设计的建筑物中的内部和外部正式品质的连贯性
- 作者：Morteza Hazbei;Carmela Cucuzzella
- 期刊名称：《International journal of design engineering》 | 2021年第1期
- parametric design;
- coherency;
- exterior facade;
- interior spatial quality;
- aesthetic;
69.Emotional characterisation of chairs by descriptors, neural network and verbalised analysis

机译：描述符，神经网络和语言分析椅子的情感特征
- 作者：Cyril Bertheaux;Rosario Toscano;Roland Fortunier;Nicolas Poisson;Jean-Christophe Roux;Celine Borg
- 期刊名称：《International journal of design engineering》 | 2021年第1期
- chair;
- emotional design;
- descriptive evaluation;
- neural network;
70.Investigation of attapulgite clay crushing by bionic tooth plates inspired from convex structures on body surface of dung beetles

机译：仿生齿平面吸收粪便结构对粪甲虫体表凸牙板粘土粉碎的研究
- 作者：Xingqiao Deng;Shike Wang;Jie Wang;Shisong Wang;Yucheng Liu;Ge He
- 期刊名称：《International journal of design engineering》 | 2021年第1期
- attapulgite clay;
- crushing performance;
- bionic design;
- dung beetle;
- two-layered double geared-roller crusher;
71.A decision consequence-based model to understand the phenomena in motorcycle engineering design from a human factor's perspective

机译：基于决策的模型，了解人为因素视角的摩托车工程设计现象
- 作者：Sean Agius;Philip Farrugia;Emmanuel Francalanza
- 期刊名称：《International journal of design engineering》 | 2021年第1期
- phenomena model;
- decision consequences;
- ergonomics;
- emotions;
- design synthesis;
- human factors;
- persona;
72.A genetic algorithm-based structural topology optimisation

机译：A genetic algorithm-based structural topology optimisation
- 作者：S.L. Gavali;Y.P. Reddy;K.N. Vijayakumar
- 期刊名称：《International journal of design engineering: IJDE》 | 2022年第1期
- topology optimisation;
- stiffness matrix;
- bone implant;
- genetic algorithms;
- lattice;
73.Advanced fuzzy logic controller design for a sustainable energy system

机译：Advanced fuzzy logic controller design for a sustainable energy system
- 作者：Kary Thanapalan;Ewen Constant
- 期刊名称：《International journal of design engineering: IJDE》 | 2021年第2期
- energy storage;
- energy management;
- sustainable energy system;
- robust controller;
- energy consumption;
74.Comparative study of lifting, installation and operation analysis of subsea manifold with Mudmat structure

机译：Comparative study of lifting, installation and operation analysis of subsea manifold with Mudmat structure
- 作者：Tarang T. Lakhani;Vijay R. Panchal
- 期刊名称：《International journal of design engineering: IJDE》 | 2022年第2期
- manifold;
- subsea;
- offshore;
- Structural Analysis and Computational Software;
- SACS;
- lifting;
- installation;
- operation;
75.Finite element analysis of horn profiles used in ultrasonic assisted electrical discharge machining machine

机译：Finite element analysis of horn profiles used in ultrasonic assisted electrical discharge machining machine
- 作者：Ashok Yadav;Vinod Yadava
- 期刊名称：《International journal of design engineering: IJDE》 | 2022年第2期
- ultrasonic assisted EDM;
- horn stresses;
- thermal analysis;
- finite element analysis;
- acoustic and vibration;
76.Multiple novel generative design solutions for various mechanical engineering related products using Autodesk Fusion 360 software

机译：Multiple novel generative design solutions for various mechanical engineering related products using Autodesk Fusion 360 software
- 作者：Prasad Umakant Bhad;Rajesh B. Buktar
- 期刊名称：《International journal of design engineering: IJDE》 | 2022年第1期
- generative design;
- novel design solutions;
- wall bracket;
- connecting rod;
- knuckle joint fork end;
- Autodesk Fusion 360;
77.Flow shop scheduling - especially structured models under fuzzy environment with optimal waiting time of jobs

机译：Flow shop scheduling - especially structured models under fuzzy environment with optimal waiting time of jobs
- 作者：Bharat Goyal;Sandeep Kaur
- 期刊名称：《International journal of design engineering: IJDE》 | 2022年第1期
- flow shop scheduling;
- triangular fuzzy numbers;
- heuristic;
- total waiting time;
- job sequencing;
78.Comprehensive review of biodiesel as an alternative fuel for diesel engines

机译：Comprehensive review of biodiesel as an alternative fuel for diesel engines
- 作者：Sanjay Patel;P.K. Brahmbhatt
- 期刊名称：《International journal of design engineering: IJDE》 | 2022年第1期
- diesel;
- biodiesel;
- combustion;
- engine;
- thermal efficiency;
- nitrogen oxides;
79.Contour optimisation of polygon shaft-hub connections for gearbox applications

机译：Contour optimisation of polygon shaft-hub connections for gearbox applications
- 作者：Maximilian Schuster;Detlev Petersen;Frank Koppenhagen
- 期刊名称：《International journal of design engineering: IJDE》 | 2022年第2期
80.A solution for joint pain and body relief through portable exercise machine

机译：A solution for joint pain and body relief through portable exercise machine
- 作者：Zahir Hasan;Moath Ali Kamli
- 期刊名称：《International journal of design engineering: IJDE》 | 2021年第2期
- joint pain;
- health issues;
- environmental conditions;
- orthopaedics;
- quality of life during COVID-19;
- dual seating joint pain exerciser;
81.Multi-objective design optimisation of deep groove ball bearing for wind turbine generator

机译：Multi-objective design optimisation of deep groove ball bearing for wind turbine generator
- 作者：Prasun Bhattacharjee;Rabin K. Jana;Somenath Bhattacharya
- 期刊名称：《International journal of design engineering: IJDE》 | 2022年第2期
82.Integrated approach for an artificial intelligence-based generative product design

机译：Integrated approach for an artificial intelligence-based generative product design
- 作者：Prasad Umakant Bhad;Rajesh B. Buktar
- 期刊名称：《International journal of design engineering: IJDE》 | 2021年第2期
- artificial intelligence;
- generative design;
- topology optimisation;
- extruded geometric component;
- convolutional neural network;
- CNN;
- deep learning;
83.Robust optimisation of spherical roller bearings based on dynamic load rating

机译：Robust optimisation of spherical roller bearings based on dynamic load rating
- 作者：Twinkle Mandawat;Rajiv Tiwari
- 期刊名称：《International journal of design engineering: IJDE》 | 2021年第2期
- spherical roller bearing;
- SRB;
- robust optimisation;
- optimisation;
- dynamic load rating;
- fatigue life;
- real coded genetic algorithm;
- NSGA-II;
- single objective optimisation;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号