首页>外文期刊>Materials Performance and Characterization

Materials Performance and Characterization

EICA

中文名称：材料性能和特性

ISSN：2379-1365
出版周期：5 times a year

发文量：366

期刊论文

热门论文

年度选择

2023
- 第2期
- 第3期
2022
- 第1期
- 第2期
- 第3期
2021
- 第1期
- 第2期
2020
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
2019
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期

更多>>

全选（0）

1.A Review Paper on Wettability Properties of Titanium and Its Oxide-Based Coatings

机译：审查论文的润湿特性钛金属及其氧化物涂层
- 作者：Vandan V. Vyas;Kamlesh V. Chauhan
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
2.Influence of Metal Transfer Modes and Postweld Heat Treatment on Tensile Properties of Gas Metal Arc-Welded AA6061-T6 Aluminum Alloy Joints

机译：金属过渡模式和焊后的影响热处理气体金属的拉伸性能弧焊AA6061-T6铝合金关节
- 作者：Addanki Ramaswamy;S. Malarvizhi;V. Balasubramanian
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
3.Viscosity of Mineral Oil Diluted by Biodiesel Methyl Esters: Methods for Mixture Predictions and Small Samples after Tribometer Testing

机译：粘度矿物油稀释的生物柴油甲基酯:混合预测方法和小摩擦计测试后样品
- 作者：Gustavo J. Molina;Sultana M. Shanta;Emeka F. Onyejizu
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
4.Oxidation Behavior of Microstructurally Different Regions of TIG Weldment in ASTM SA 210 GrA1 Boiler Steel

机译：氧化行为的微观结构不同地区的TIG焊件在ASTM 210 GrA1 SA锅炉用钢
- 作者：Ravindra Kumar
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
5.Fabrication and Investigation of Mechanical and Dry Sliding Wear Characteristics of Al6061-Si3N4 Composites

机译：制造和机械和调查Al6061-Si3N4的干滑动磨损特性复合材料
- 作者：G. B. Veeresh Kumar;A. Ulhas Krishna Rao;T. Srinivas Rao
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
6.Reduction in Residual Stress during Plastic Deformation of the Aluminum Alloy 7449

机译：减少残余应力在塑料7449变形铝合金
- 作者：J. S. Robinson;T. Pirling;C. E. Truman
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
7.Investigations on the Machining Characteristics of Silica-Phenolic Ablative Tiles Bonded to a Metal Substrate

机译：调查的加工特点Silica-Phenolic烧蚀瓷砖连着一个金属底物
- 作者：V. S. Sooraj;P. Chakravarthy;H. Danish
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
8.Approach to the Design and Manufacturing of Prosthetic Dental Restorations According to the Rules of Industry 4.0

机译：的设计和制造方法根据的假牙齿修复行业规则4.0
- 作者：Leszek A. Dobrzanski;Lech B. Dobrzanski
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
9.Carbide Faceting in Alloy 690: HRTEM Study

机译：690年合金碳化物小面:介绍研究
- 作者：Sumita Santra;S. V. Ramana Rao;K. Kapoor
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
10.Investigation of Mechanical and Tribological Properties of Al6061-TiB2 Metal Matrix Composites

机译：机械和摩擦学的调查Al6061-TiB2金属基复合材料的性质
- 作者：G. B. Veeresh Kumar;D. Gopinath Reddy;C. Vineeth Reddy
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
11.Effect of Silica Sand Filler on Mechanical Properties of Epoxy Grout for Composite Repair of Steel Pipelines

机译：硅砂填料对机械的影响环氧树脂灌浆的复合修复的性质钢铁管道
- 作者：S. N. A. Azraai;K. S. Lim;N. Yahaya
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
12.Temperature Dependence of Photoluminescence Spectra in Polystyrene

机译：依赖于温度的光致发光光谱在聚苯乙烯
- 作者：K. Tsagli;S. V. Dordevic
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
- temperature dependence;
- Photoluminescence spectroscopy;
13.Wettability Studies of Titanium and Its Oxide-Based Coatings

机译：钛及其润湿性的研究氧化物涂层
- 作者：Vandan V. Vyas;Kamlesh V. Chauhan
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
14.Studies on Pectin-Polyvinyl Alcohol- Based Biodegradable Polymer Blend Electrolytes

机译：研究Pectin-Polyvinyl酒精——的基础可生物降解共混聚合物电解质
- 作者：C. Nithya Priya;R. Muruganandham;M. Muthuvinayagam
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
15.Testing of Nanofluids and Their Machining Performance Evaluation

机译：纳米流体的测试和加工绩效评估
- 作者：Vamsi Krishna Pasam;Rukmini Srikant Revuru;Parimala Neelam
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
16.Comparative Surface Morphology of Machined Hybrid and Unhybrid Zinc-Aluminum Alloy-Based Metal Matrix Composites

机译：机械混合的比较表面形态和Unhybrid Zinc-Aluminum Alloy-Based金属基复合材料
- 作者：Rajaneesh N. Marigoudar
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
17.Direct Ink Writing Method for Manufacturing Electronic Circuits Using Multiwalled Carbon Nanotubes and Polyvinyl Alcohol Composites

机译：直接墨水制造的写作方法电子电路使用微碳碳纳米管与聚乙烯醇复合材料
- 作者：Syed Riyaz Ahammed;Ayyappan Susila Praveen
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
- Electrical resistivity;
- Electronic circuits;
- 3D PrinterBindersMulti-Walled Nanotubeplate typeInk;
18.Optimization of Reducing Agents for Selective Bandgap Manipulation in Visible Region of Graphene Oxide and Its Work Function Estimation

机译：优化减少代理人的选择性隙操纵在可见光区域氧化石墨烯及其功函数估计
- 作者：Lucky Krishnia;Pawan K. Tyagi
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
19.Dynamic Mechanical and Dielectric Properties of Fly Ash/(Polystyrene/ Low-Density Polyethylene) Composites

机译：动态机械和介电性能粉煤灰/聚苯乙烯/低密度聚乙烯复合材料
- 作者：Gamal Nasr;Taqwa Mohamed;Rania Khalil
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
20.The Effect of Graphene Oxide on Flame Retardancy of Polypropylene and Polystyrene

机译：氧化石墨烯在阻燃性的影响聚丙烯和聚苯乙烯
- 作者：Maziyar Sabet;Hassan Soleimani;Erfan Mohammadian
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
21.Effect of Rolling after Heat Treatment on Hydrogen Embrittlement Susceptibility for High Strength Steel Fasteners

机译：轧制后热处理对氢的影响高强度的脆化敏感性钢铁紧固件
- 作者：F. Saliby;S. Brahimi;S. Rajagopalan
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
22.Classification of Defect Types in SLM Ti-6Al-V4 by X-ray Refraction Topography

机译：在SLM Ti-6Al-V4分类的缺陷类型x射线折射地形
- 作者：Rene Laquai;Bernd Randolf Muller;Galina Kasperovich
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
23.On the Constraint Factor Relating Uniaxial and Indentation Yield Strength of Polycrystalline Materials Using Spherical Microindentation

机译：在单轴和相关的约束因素缩进多晶的屈服强度材料使用球形Microindentation
- 作者：Anirudh Bhat;R. W. Neu
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
- Yield point;
- indentation;
- Yield strengthrestraint coefficientpolycrystalline materials;
24.Cavitation Erosion Characteristics of High Bulk Modulus Oils: Preliminary Evaluation Experiment for Hydraulic Equipment

机译：空蚀特性的高体积模量油:初步评估实验液压设备
- 作者：Toshiharu Kazama;Shinji Aoki;Masahiro Kobessho
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
25.Structure Property Correlation of In Situ Reinforced Al-based Metal Matrix Composite via Stir Casting

机译：原位的结构性质相关钢筋Al-based金属基复合材料通过搅拌铸造
- 作者：Ashish Kumar Gupta;Banshidhar Mallik;Debdas Roy
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
26.Novel Insight into Tribology of Carbon Black Soot Particles in Engine Oil

机译：小说洞察摩擦学的碳黑色烟尘粒子在机油
- 作者：Angela Maria Tortora;Gerrit Zijlstra;Deepak Halenahally Veeregowda
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
27.Functionalized Graphite-Reinforced Cross-Linked Poly(vinyl Alcohol) Nanocomposites for Vibration Isolator Application: Morphology, Mechanical, and Thermal Assessment

机译：功能化Graphite-Reinforced交联聚(乙烯醇)纳米复合材料的振动隔离器应用程序:形态、机械和热评估
- 作者：Komal Singh;Naman Jain;Akarsh Verma
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
28.Linear In-Plane Elasticity of a Polygon Honeycomb Core with Zero Poisson's Ratio

机译：一个多边形的线性平面弹性蜂窝核心与零泊松比
- 作者：Ning Feng;Jie Yan;Zhiyong Feng
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
- Elastic Modulus;
- Linear;
- honeycomb coresTheoretical ModelsPoissons ratio;
29.Effects of Prestrain on the Nonlinear Viscoelastic Properties of a Model Sealant

机译：预应变的非线性粘弹性的影响属性模型的密封胶
- 作者：D. L. Hunston;K. T. Tan;C. C. White
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
30.Ultraviolet-Visible Spectroscopy: A Qualitative Tool to Predict Dispersion and Interphase Characteristics in Carbon-Based Particulate Filled Poly (Lactic Acid) Composites

机译：紫外可见光谱法:一个定性工具来预测色散和间期碳颗粒的特征聚(乳酸)复合材料
- 作者：Ajay Vasudeo Rane;Krishnan Kanny;Merlin Biju
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
- Ultraviolet visible spectroscopy;
- lactic acid;
- poly(lactic acid)weight percentInterphase;
31.Fatigue Behavior of Bolted Joints: Comparative Analysis for the Effect of Fretting and Stress Concentration

机译：螺栓接头的疲劳行为:比较分析焦虑和压力的影响浓度
- 作者：Xin Li;Jianwei Yang
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
32.A Review of Polymer Electrets and Their Applications

机译：回顾聚合物驻极体及其应用程序
- 作者：Pooja Saxena;Prashant Shukla
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
- thin films;
- Polarization;
- CHARGE TRAPPINGPhotovoltaic cells;
33.Effect of Warm Forging on the Microstructure and Corrosion Behavior of Austenitic Stainless Steel 316LN

机译：的微观结构和热锻奥氏体不锈钢的腐蚀行为316 ln
- 作者：Viranshu Kumar;Ratnesh Kumar Gupta;Ghanshyam Das
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
34.Evaluation of Heat Treatment Effect on Impact Strength of Glass Fiber-Reinforced Composite Material Using NDT Technique

机译：评估对影响热处理效果玻璃纤维增强复合材料强度材料使用无损检测技术
- 作者：Ali Zia Naqvi;Tariq Mairaj Rasool Khan;M. Ghazanfar Ali
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
35.The Effect of Reflow Temperature on Time at the End of Gravity Zone (T_(gz)) of Sn-3.8Ag-0.7Cu Solder Alloy

机译：回流温度对时间的影响年底重力区(T_(广州)识别)的sn - 3.8 - ag - 0.7 -铜焊料合金
- 作者：Ramanandan Santhanu Panikar;V. Amogha Skanda;Sanjay Tikale
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
36.Friction Stir Processing of AA6063-T6 Tubes and End Forming Characterization at Varying Tool Pin Profiles

机译：搅拌摩擦加工AA6063-T6管最终形成特征在不同销工具配置文件
- 作者：Arvind K. Agrawal;R. Ganesh Narayanan
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
37.Characterization of Alkali-Activated Palm Oil Fuel Ash Pastes as a Function of Calcination Temperatures of Raw Precursor

机译：表征Alkali-Activated棕榈油的燃料灰贴作为煅烧的函数原始的高温前兆
- 作者：Flora Anak Albert Daud;Idawati Ismail;Raudhah Ahmadi
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
38.Metallography and Computed Tomography Analysis of the Shrinkage Cavity Formed in Advanced High-Strength Steel Resistance Spot Welds

机译：金相学和计算机断层扫描分析先进的缩孔形成高强度钢电阻点焊
- 作者：Vijeesh Vijayan;Siva Prasad Murugan;Seong-Guk Son
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
39.Wear and Tensile Behavior of Titanium Carbide and Fly Ash-Reinforced Magnesium Matrix Composites

机译：磨损和硬质合金和钛的拉伸行为飞Ash-Reinforced镁基复合材料
- 作者：Avtar Singh;Niraj Bala;Baljinder Ram
- 期刊名称：《Materials Performance and Characterization》 | 2020年第1期
40.Hot Deformation Behavior of AA2024 with and without In Situ Titanium Diboride Dispersoids

机译：AA2024和的热变形行为没有原位二硼化钛分散体
- 作者：Rajiv Panda;R. K. Gupta;Animesh Mandal
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
41.Peculiarities of Microstructure Evolution and Property Changes of Titanium Alloys In Situ during Electric Forging

机译：和微观组织演变的特点钛合金原位的属性更改在电锻
- 作者：Lembit Kommel
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
42.Hot Workability and Microstructure Control of Aluminum-2.5 Copper-1.5 Magnesium Alloy

机译：热施工性能和微观结构的控制铜铝- 2.5 - 1.5镁合金
- 作者：A. Sarath Krishnan;V. Anil Kumar;R. K. Gupta
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
43.Dynamic Recrystallization in Titanium Alloys: A Comprehensive Review

机译：动态再结晶在钛合金:A全面审查
- 作者：Ritam Chatterjee;S. V. S. Narayana Murty;Alankar Alankar
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
44.Understanding the Hot Working Behavior of a Ni-Base Superalloy XH 67 via Processing Map Approach

机译：理解的热加工行为Ni-Base超耐热不锈钢XH 67通过处理地图方法
- 作者：N. T. B. N. Koundinya;K. Sri Bharadwaj;E. Nandha Kumar
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
45.High-Temperature Deformation Behavior of 718Plus: Consideration of γ' Effects

机译：718 +的高温变形行为:考虑γ的效果
- 作者：Utkudeniz Ozturk;Jose Maria Cabrera;Jessica Calvo
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
46.Hot Deformation Studies and Optimization of Hot Working Parameters in Custom 465? Martensitic Precipitation Hardenable Stainless Steel

机译：热的热变形研究和优化465年自定义参数工作吗?沉淀可硬化的不锈钢
- 作者：C. R. Anoop;R. K. Singh;Ravi Ranjan Kumar
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
47.Mechanism of Variation in HighTemperature Grain Stability of Aluminum in Dissimilar Friction Stir Welds

机译：高温颗粒的变化机制铝在不同的搅拌摩擦的稳定焊接
- 作者：Amlan Kar;Satish V. Kailas;Satyam Suwas
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
48.Comparison of Prediction Capabilities of Flow Stress by Various Constitutive Equation Models for Hot Deformation of Aluminum Matrix Composites

机译：比较流的预测功能压力由各种本构方程模型铝基复合材料的热变形
- 作者：P. Neelima;S. V. S. Narayana Murty;P. Chakravarthy
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
49.Contact Analysis for Contact Thermoforming of PMMA Sheet

机译：对接触热成型PMMA接触分析表
- 作者：Jeet P. Patil;Yogesh S. Gaikhe;Vilas Nandedkar
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
50.Effect of Multidirectional Forging with Decreasing Temperature on the Microstructure and Microhardness of the Aluminum-Magnesium-ScandiumZirconium Alloy

机译：多向锻造效果降低温度对显微组织显微硬度的Aluminum-Magnesium-ScandiumZirconium合金
- 作者：O. S. Sitdikov;E. V. Avtokratova;M. A. Murzinova
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
51.Exploring the Safe Hot Working Regime of Creep-Resistant Mg-3Ca-2Sn-1Al Alloy

机译：探索安全热加工制度抗蠕变Mg-3Ca-2Sn-1Al合金
- 作者：N. T. B. N. Koundinya;K. Rangan;S. V. S. Narayana Murty
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
52.High Velocity and Temperature Effects on the Bending Behavior of Nickel Nanowire: A Large-Scale Molecular Dynamics Simulation Study

机译：高速度和温度的影响镍纳米线的弯曲行为:一个大规模的分子动力学模拟研究
- 作者：Pradeep Gupta;Krishna Chaitanya Katakam;Natraj Yedla
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
53.Influence of Deformation Mode on Hot Deformation Behavior of CP Titanium

机译：变形模式对热变形的影响CP钛的行为
- 作者：C. N. Athreya;S. Suwas;V. Subramanya Sarma
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
54.Development and Validation of Processing Maps for Hot Deformation of Modified AISI 321 Austenitic Stainless Steel

机译：处理地图的发展和验证热变形的修改符合美国钢铁协会的321奥氏体不锈钢
- 作者：C. R. Anoop;R. K. Singh;Ravi Ranjan Kumar
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
55.Understanding Hot Workability and Flow Stress Prediction through Processing Map with Microstructural Correlation for HY85 Steel

机译：了解热加工性和流动应力预测通过处理地图HY85钢的显微结构的相关性
- 作者：Sanjeev Kumar;S. K. Rajput;Niranjan Kumar
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
56.A Study of Recrystallization Behavior of Two Ni-Cu-Containing High-Strength Steels with Different Mn Contents

机译：2的再结晶行为的研究Ni-Cu-Containing高强度钢和不同锰含量
- 作者：Atul Kumar;T. V. V. S. Vara Prasad;M. Nazeer
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
57.Study on Hot Deformation Behavior of High Carbon Low Alloy Steel by Constitutive and ANN Modeling and Development of Processing Maps

机译：研究高碳的热变形行为低合金钢由本构和ANN建模和发展的处理地图
- 作者：Deepak Kumar;Sumit Kumar;S. K. Nath
- 期刊名称：《Materials Performance and Characterization》 | 2020年第2期
58.Wear and Scratch Resistance of Cobalt Boride Layer Exposed to a Diffusion Annealing Process

机译：钴硼化层的磨损和抗划伤接触到一个扩散退火过程
- 作者：I. Campos-Silva;A. D. Contla-Pacheco;V. H. Castrejon-Sánchez
- 期刊名称：《Materials Performance and Characterization》 | 2020年第3期
59.Impact Study of Electron-Beam Heating on the Structure and Properties of Boroaluminized Layers Aimed at Producing New Composite Coatings with Special Properties

机译：电子束加热的影响研究Boroaluminized层的结构和性能旨在产生新的复合涂料特殊性质
- 作者：I. Polyansky;I. Sizov;O. Lazareva
- 期刊名称：《Materials Performance and Characterization》 | 2020年第3期
- microhardness;
- Electron beam heating;
- X-ray analysisaluminium;
60.Modeling of the Kinetics of Boron Diffusion in Dehydrated Paste Pack-Borided AISI M2 Steel Based on Two Mathematical Approaches

机译：硼扩散动力学的建模脱水粘贴Pack-Borided AISI M2钢的基础在两种数学方法
- 作者：M. Keddam;M. Kulka
- 期刊名称：《Materials Performance and Characterization》 | 2020年第3期
- Activation energy;
- IRON BORIDES;
- Steelsdiffusion coefficientKineticsModelingPastesAISI;
61.Technology to Improve the Performance Properties of Heterogeneous Boronized Layers

机译：技术来提高性能属性异构的渗硼层
- 作者：M. G. Krukovich
- 期刊名称：《Materials Performance and Characterization》 | 2020年第3期
62.Apparent Fracture Toughness of the CoB-Co2B Interface

机译：CoB-Co2B表观断裂韧性接口
- 作者：I. Campos-Silva;E. J. Hernández-Ramirez;H. I. Mondrag′on-Nava
- 期刊名称：《Materials Performance and Characterization》 | 2020年第3期
63.Characterization of Microstructure and Fracture Performance of Boronized H11 Grade Hot-Work Tool Steel

机译：微观结构表征和骨折渗硼的性能H11年级热作工具钢
- 作者：Peter Jur?i;Mária Hudáková
- 期刊名称：《Materials Performance and Characterization》 | 2020年第3期
64.Paste Borided Layers Produced on XC38 Steel Using a New Activator

机译：粘贴硼化层对XC38钢材生产使用一个新的催化剂
- 作者：Amed Daas;Laid Abdelkrim Allaoui;Sami Zidelmel
- 期刊名称：《Materials Performance and Characterization》 | 2020年第3期
- blind roaster;
- microhardness;
- Steelsbornizing treatmentboride layersodium fluoroborateProportion;
65.Microstructure and Properties of Nickel/Detonated Nanodiamond Composites Fabricated by Powder Metallurgy

机译：微观结构和性能的镍/引爆金刚石复合材料制造的粉末冶金
- 作者：Eman Toulba;Mahmudun N. Chowdhury;Ahmed I. Ali
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
66.Hot Extrusion of a Commercial Aluminum Powder Metallurgy Metal Matrix Composite Material

机译：热挤压的商业铝粉冶金金属基复合材料
- 作者：M. F. Wilson;G. A. W. Sweet;M. Y. AmegadzieDDepartment of Mechanical Engineering Dalhousie University 1360 Barrington St. Halifax Nova Scotia B3J 1Z1 Canada
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
67.Microstructural Evolution during Sintering and Fracture Behavior of Iron-Copper-Carbon Compacts Made with Elemental Powders

机译：在烧结和微观结构演化Iron-Copper-Carbon压缩的断裂行为用元素粉末
- 作者：Thomas F. Murphy;Bruce A. Lindsley
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
68.Threshold Concentration of Surfactant Agent in Feedstocks Used for Low-Pressure Powder Injection Molding

机译：阈值浓度的表面活性剂剂原料用于低压喷粉成型
- 作者：Ghalya Ali;Vincent Demers;Raphaol Cote
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
- Metal powders;
- moldability;
- Oleic AcidsParaffinViscosityAgentsstearic acid;
69.Solidification Structures in Low-Alloyed Powder Metallurgy Steels Obtained through Permanent Liquid Phase Sintering Using a Master Alloy Containing Boron

机译：凝固结构低合金粉末冶金钢通过永久性的使用母合金液相烧结含硼
- 作者：Simon Gelinas;Jean-Nicolas Rousseau;Carl Blais
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
70.Powder Characterization Techniques

机译：粉表征技术
- 作者：P. Ramakrishnan
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
- Powder technology;
- PARTICLE MORPHOLOGY;
- Manufacturing processrotating cascadespreadability;
71.Advances in Powder-based Technologies for Production of High-Performance Sputtering Targets

机译：状技术的进步生产高性能溅射的目标
- 作者：F. M. Mwema;E. T. Akinlabi;O. P. Oladijo
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
72.Measurement of Water Content in Metal Powders

机译：测量金属粉的含水量
- 作者：Louis-Philippe Lefebvre;Jiajie Dai;Yannig Thomas
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
73.Comparison of the Structure and Properties of the Solid Co-Cr-W-Mo-Si Alloys Used for Dental Restorations CNC Machined or Selective Laser-Sintered

机译：结构和性能的比较固体Co-Cr-W-Mo-Si合金用于牙科修复数控加工或选择性Laser-Sintered
- 作者：Lech B. Dobrzanski;Anna Achtelik-Franczak;Joanna Dobrzanska
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
74.Microstructure, Hardness, Wear, and Magnetic Properties of (Tantalum, Niobium) Carbide-Nickel-Sintered Composites Fabricated from Blended and Coated Particles

机译：显微组织、硬度、磨损和磁性(钽、铌)的属性Carbide-Nickel-Sintered复合材料制作的从混合和涂层粒子
- 作者：Hossam M. Yehia;Walid M. Daoush;F. Abdel Mouez
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
75.Processing of Microscale Aluminum Foamed Particles

机译：微尺度处理铝泡沫粒子
- 作者：D. Key;Walid M. Daoush;K. Morsi
- 期刊名称：《Materials Performance and Characterization》 | 2020年第4期
- Aluminium Foam;
- Process control agent;
- TITANIUM HYDRIDESFoamingBall millingmicroscales;
76.Investigation of the Interlaminar Shear Properties of Fiber-Reinforced Polymers via Flexural Testing Using Digital Image Correlation

机译：调查的层间剪切性能纤维增强聚合物通过弯曲测试使用数字图像相关
- 作者：Matthias Merzkirch;Tim Foecke
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
77.Determination of the Fracture Resistance of Ductile Polymers: The ESIS TC4 Recent Experience

机译：断裂阻力的决心韧性聚合物:esi TC4最近的经验
- 作者：Francesco Baldi;Silvia Agnelli;Luca Andena
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
- LOAD SEPARATION;
- J integral;
- FRACTURE RESISTANCE;
78.Fatigue Behavior of Thick-Walled Nodular Cast Iron Containing Dross

机译：厚壁球墨铸铁的疲劳行为包含糟粕
- 作者：Christoph Bleicher
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
79.Successful Round Robin Analyses Resulting from the Engineered Residual Stress Implementation Working Group

机译：成功的循环分析造成的工程残余应力实现工作集团
- 作者：Robert Pilarczyk;Ricardo Actis;Joseph Cardinal
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
80.Effect of Precrack Configuration and Lack-of-Fusion on the Elastic-Plastic Fracture Toughness of Additively Manufactured Ti-6Al-4V parts

机译：Precrack配置和效果未熔合的弹塑性断裂韧性加法制造的Ti-6Al-4V部分
- 作者：Enrico Lucon;Jake Benzing;Nikolas Hrabe
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
81.On the Possible Relaxation of the ASTM E1921 and ASTM E1820 Standard Specifications with Respect to the Use of the Mini-CT Specimen

机译：在可能的ASTM E1921和放松ASTM E1820标准规格的尊重使用Mini-CT标本
- 作者：Marlies Lambrecht;Rachid Chaouadi;Meng Li
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
82.Development of Automated Model Generation and Analysis of SurfaceCracked Plates in Bending for Interpolated Elastic-Plastic J-Integral Solutions

机译：自动化的模型生成和发展SurfaceCracked板在弯曲的分析插值弹塑性j积分解决方案
- 作者：Michael W. Renfro;Phillip A. Allen;Christopher D. Wilson
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
83.Effect of Interspersed Hold at Peak Load on the High-Temperature Fatigue Crack Growth Rate Response of SS 316 L(N) Stainless Steel

机译：效果点缀在峰值负载高温疲劳裂纹增长率SS 316 L不锈钢(N)的反应
- 作者：Raghu V. Prakash;Manuel Thomas
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
84.A Proposal of the Crack Tip Opening Displacement Calculation Formula and Its Conversion Factor to J-Integral in C(T) Specimens

机译：裂纹尖端张开位移的提议计算公式及其转换因子j积分用C (T)标本
- 作者：Tomoya Kawabata;Yoichi Kayamori;Tetsuya Tagawa
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
85.Material Characterization of Additively Manufactured Ti-6Al-4V Parts for an Environmental Control and Life Support System in Space Flight Hardware

机译：材料特性的分析制造Ti-6Al-4V部分环境在太空飞行控制和生命支持系统硬件
- 作者：Christopher Roberts;Preston McGill;Larry Foreman
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
86.The Effects of Nonproportional Biaxial Loading Paths on Ductile Fracture Initiation: A Void Growth Analysis

机译：的影响非比例双轴加载在韧性断裂起始路径:一个空白增长分析
- 作者：Zhaoyu Jin;Xin Wang;Zheng Liu
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
87.Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures

机译：使用兼容的夹层作为裂缝终结者3-D-Printed高分子结构
- 作者：Florian J. Arbeiter;Sandra Petersmann;Johannes Wiener
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
88.Characterization of Intrinsic ΔKth to Support Crack Growth Estimates under Spectrum Loading in the HCF/VHCF Domain

机译：特征的内在Δk来支持谱载荷作用下的裂纹增长估计HCF / VHCF域
- 作者：R. Sunder;Ramesh Koraddi;Vishwas Chandra
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
- Crack propagation;
- Testing Procedures;
- Spectrahigh cycle fatigue;
89.Comparison between Loading Rate and Local Stress Rate When Applying ASTM E1921 at Elevated Loading Rates

机译：对比加载速率和局部应力采用ASTM E1921升高时加载速率利率
- 作者：Uwe Mayer
- 期刊名称：《Materials Performance and Characterization》 | 2020年第5期
90.Effect of Viscosity on the ErosionCorrosion of Steels Exposed to White Liquor Including Abrasives for Extended Time Periods

机译：ErosionCorrosion的粘度的影响钢暴露于白液包括磨料磨具的时间延长
- 作者：B. Aydin Baykal;Preet M. Singh
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期
91.Interrelationship of Thermal Effects on Calcium Sulfate Dihydrate Casts Containing Borax and Kaolin: Differential Thermal Analysis (DTA), Thermogravimetric Analysis (TGA), and Contact Dilatometry

机译：热的相互关系对钙的影响硫酸二水合物含有硼砂和高岭土:差热分析(DTA)、热重分析(TGA)和接触膨胀法
- 作者：Dick C. Engbrecht;Deidre A. Hirschfeld
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期
92.Tribological Performance of In Situ Reinforced Al-Based Metal Matrix Composite Processed by Spark Plasma Sintering

机译：摩擦学的原位增强的性能Al-Based金属基复合处理火花等离子烧结
- 作者：B. Mallik;K. Sikdar;D. Roy
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期
93.Study on Cavitation Behaviors of Spiral Oil Groove Journal Bearing

机译：研究空化螺旋油槽的行为轴颈轴承
- 作者：Lili Wang;Guoteng Yuan;Guoxiao Yin
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期
- rotational speed;
- Lubricating oils;
- Hydrodynamic bearingsnumerical simulation;
94.Statistical Analysis of Fly Ash Sampling Frequency

机译：粉煤灰采样频率的统计分析
- 作者：William Cole Spencer;Eleazar I. Diaz Loya;Anupam Joshi
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期
95.Surface Activation of Wood Plastic Composites (WPC) for Enhanced Adhesion with Epoxy Coating

机译：木塑复合材料的表面活化(WPC)与环氧树脂涂层增强附着力
- 作者：Mostafa R. Mohamed;Hamdy M. Naguib;Rasha A. El-Ghazawy
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期
96.Performance and Characterization of Two-Dimensional Material Graphene Conductivity—A Review

机译：性能和特性二维材料石墨烯的Conductivity-A审查
- 作者：Rajib Nandee;Mohammad Asaduzzaman Chowdhury;Mohi Uddin Ahmed
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期
- Thermal Conductivity;
- graphene;
- Electric conductivityMaterials;
97.Fabrication and Mechanical Characterization of Short Fiber-Glass Epoxy Composites

机译：制造和机械特性短玻璃纤维环氧树脂复合材料
- 作者：Paul Bere;Mircea Dudescu;Calin Neamtu
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期
98.Structural Study and Electrical Properties of Bi1.5-xCaxSb1.5CuO7 Pyrochlore-Type Solid Solution Series

机译：结构研究和电气性能Bi1.5-xCaxSb1.5CuO7 Pyrochlore-Type固体解决方案系列
- 作者：Rafik El Arslene Dra;Ahmed Bekka;Robert E. Dinnebier
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期
99.Quench Cooling Performance-Hardness Correlation for AISI 1045 and 1090 Steels

机译：淬火冷却Performance-Hardness相关性符合美国钢铁协会的1045和1090钢
- 作者：U. V. Nayak;K. N. Prabhu
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期
100.Comparison of Surface Treatments for Secondarily Bonded Joints of Marine Grade Composites

机译：比较次要的表面处理保税关节海洋级复合材料
- 作者：Scott M. Tomlinson;Roberto A. Lopez-Anido
- 期刊名称：《Materials Performance and Characterization》 | 2019年第1期

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号