首页>外文期刊>JSME International Journal

JSME International Journal

SCIEI

中文名称：JSME国际期刊

ISSN：1344-7653
出版周期：Quarterly

发文量：0

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.Analysis of the Dynamic Behavior of the Inner Hair Cell Stereocilia by the Finite Element Method

机译：分析的动态行为内在的头发静纤毛细胞的有限元方法
- 作者：Toshihiro MATSUF;Chihiro NAKAJIMA;Yuichi YAMAMOTOMasayoshi ANDOHKoji IIDAMichio MURAKOSHIShun KUMANOHiroshi WADA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
2.Development of Nonpowered Lift for Wheelchair Users

机译：发展Nonpowered抬起轮椅用户
- 作者：Yusuke KOBAYASHF;Hiroaki SEKT;Yoshitsugu KAMIYAMasatoshi HIKIZUMitsuyoshi MAEKAWA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
3.Development of Active Rocking Chair with Changing Swing According to Heartbeat Fluctuation

机译：发展与变化的活跃的摇椅根据心跳起伏摇摆
- 作者：Takeshi KAWASHIMA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
4.Modeling on a Gimbal with an Antenna and Investigation on the Influence of Backlash

机译：建模与天线和万向节调查反应的影响
- 作者：Joo Hyun BAEK
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
- Servo systems;
- Backlash;
- TRACKING SYSTEMModelingantennaeBandwidthANTENNA;
5.Dynamic Characteristics Measurements of a Car Wiper Blade

机译：一辆汽车的动态特性测量结果雨刮器
- 作者：Yusaku FUJIF;Takao YAMAGUCHI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
6.General-Purpose Expression of Structural Connectivity in the Parallel Solution Scheme and Its Application

机译：通用的表达结构连接在并行方案和解决方案它的应用
- 作者：Daigoro ISOBE;Atsushi YAGI;Shunsuke SATO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
7.A Global Robust Optimization Using Kriging Based Approximation Model

机译：一个全局鲁棒优化使用基于克里格近似模型
- 作者：Kwon-Hee LEE;Gyung-Jin PARK
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
8.Structural Modification with Mode Shape Expansion for Rib Stiffeners

机译：结构改造与扩张模式形状为肋加强剂
- 作者：Fumiyasu KURATANI;Tetsuo SHIMADA;Tadao YAMANOTakeshi OGAWA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
9.Combination of Various Weighting Functions to Improve Modal Curve Fitting for Actual Mechanical Systems

机译：结合不同的权重函数提高模态曲线拟合实际的机械系统
- 作者：Meifal RUSLF;Masaaki OKUMA;Takeshi NAKAHARA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
10.Study on Acoustic Cavitations in the Ultrasonic Radiation Field

机译：研究超声波的声学穴蚀现象辐射场
- 作者：Chaoqun WU;Noritoshi NAKAGAWA;Masaya FUJIHARA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
11.Dynamic Characteristics of Exhaust Hanger Composed of Rubber and Thin Metal Ring

机译：排气吊架组成的动态特征橡胶和薄的金属环
- 作者：Kazunari NAKAHARA;Noritoshi NAKAGAWA;Katsutoshi OHTATetsuya MIYAKERamanjaneyulu KAKARLA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
12.Chatter Prediction in End Milling by FNN Model with Pruning

机译：在端铣喋喋不休的预测的模糊神经网络模型与修剪
- 作者：Junichi HINO;Seiichi OKUBO;Toshio YOSHIMURA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
- Surface finish;
- Fuzzy neural networks;
- Expert Systemtree surgeryEnd millingCHATTER;
13.Fault Diagnosis System of Induction Motors Using Feature Extraction, Feature Selection and Classification Algorithm

机译：感应电动机的故障诊断系统特征提取、特征选择和分类算法
- 作者：Bo-Suk YANG;Tian HAN;Zhong-Jun YIN
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
14.The Dynamic Equation and Simulation of a Linkage Mechanism Fabricated from Three-Dimensional Braided Composite Materials

机译：一个链接的动力学方程和仿真从三维机制的编织复合材料
- 作者：Gan-wei CAP;Ru-gui WANG;Zhao-jun LI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
15.An Active Micro Vibration Isolator with Zero-Power Controlled Magnetic Suspension Technology

机译：一个活跃的微振动隔离器与热敏电阻器控制的磁悬浮技术
- 作者：Md. Emdadul HOQUE;Masaya TAKASAKI;Yuji ISHINOHirohisa SUZUKITakeshi MIZUNO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
16.Removal of Pipe Fouling Inside Pipes Using Ultrasonic Waves

机译：清除管道内污染管道使用超声波
- 作者：Noritoshi NAKAGAWA;Masaya FUJIHARA;Chaoqun WUJun SATONOBU
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
17.Newly-Developed Adaptive Noise Absorption Control Technology for High Speed Fan Noise Reduction

机译：新近发展起来的自适应噪声吸收控制的高速风机降噪技术
- 作者：Hiroshi KOBAYASHI;Masaharu KOH;Shuniehi OZAKTMakoto YOKOCHITakuo SATO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
18.Configurations of Large Capacity Ultrasonic Complex Vibration Sources with Complex Transverse Vibration Rods and a Disk with Multiple Transducers

机译：配置大容量的超声波复杂的和复杂的横向振动源振动棒和多个磁盘传感器
- 作者：Jiromaru TSUJINO;Tetsugi UEOKA;Yuya KIKUCHF
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
19.Control of Human Generating Force by Use of Acoustic Information - Utilization of Onomatopoeic Utterance

机译：通过使用控制人类产生的力——利用声学信息拟声的话语
- 作者：Taichi SATO;Keiichi OYAMA;Miki IIMURAHarumi KOBAYASHPKihachiro TANAKA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
20.Acoustic Beam Scanning Using Annular Transducer Array Introducing Decentering Operation

机译：声束扫描使用环形传感器数组的引入使离心操作
- 作者：Hiroyuki MASUYAMA;Koichi MIZUTANF
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
21.Vibratory Tactile Sensor Integrated a Longitudinal Resonator and a Force Sensor

机译：纵向振动触觉传感器集成谐振器和一个力传感器
- 作者：Subaru KUDO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
22.Experimental Results of Converted NAH Method

机译：不转换方法的实验结果
- 作者：Masao NAGAMATSU
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
23.Feedback Control of an Active Sound Insulation Unit

机译：反馈控制的一个活跃的隔音单位
- 作者：Naoki KANAMORI;Masaharu NISHIMURA;Takumi MISHIRO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
24.The Study of Dynamic Balancing for High-Speed Presses

机译：这项研究为高速动平衡按
- 作者：Cheng-Ho LI;Pei-Lum TSO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
- bobweight;
- disks;
- kinetic equilibriumpress-inPresscultivatorsVibration;
25.Study of the Aero-Acoustic and Aerodynamic Effects of Soft Coating upon Airfoil

机译：Aero-Acoustic和空气动力学效应的研究软涂层在机翼
- 作者：Janos VAD;Gabor KOSCSO;Miklos GUTERMUTHZsolt KASZATamas TABITibor CSORGO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
26.Reduction of Vibratory Stress of Compressor Vane by Use of Friction Damper

机译：减少压缩机叶片振动应力利用摩擦阻尼器
- 作者：Yasutomo KANEKO;Kazushi MORF;Masayuki TOMIF
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
27.Frequency Characteristics of Ultrasonic Plastic Welding - 27 kHz to 180 kHz Ultrasonic Plastic Welding Systems

机译：超声波塑料的频率特征焊接- 27千赫至180千赫超声波塑料焊接系统
- 作者：Jiromaru TSUJINO;Misugi HONGOH;Masafumi YOSHIKUNIHiroyuki MIURATetsugi UEOKA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第3期
28.Adaptive Accommodation Control Method for Complex Assembly

机译：自适应调节控制方法复杂组装
- 作者：Sungchul KANG;Munsang KIM;Shinsuk PARK
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
29.Consideration on Elastic Vibration Control of a Magnetically Levitated Thin Steel Plate Using Sliding Mode Control

机译：考虑弹性振动控制的磁悬浮薄钢板滑模控制
- 作者：Shinya HASEGAWA;Yasuo OSHINOYA;Kazuhisa ISHIBASHI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
30.Method of Preventing Unstable Vibration Caused by Time Delays in Contact Rotating Systems (Application of New Stability Analysis)

机译：的方法防止不稳定的振动引起的接触旋转系统的时间延迟(应用新的稳定性分析)
- 作者：Nobuyuki SOWA;Takahiro KONDOU;Hiroki MORIMyung-Soo CHOI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
31.The Dynamic Characteristic of Printed Circuit Board with the Use of the Concept of Simplified Representative Volume Elements

机译：印刷电路的动态特性板使用简化的概念代表性体积元
- 作者：Taek Yul OH;Hyun Suk SEO;Young-Ha KWONYoon Hyuk KIM
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
32.Recyclability Evaluation Method Considering Material Combination and Degradation

机译：再循环能力评价方法考虑材料组合和退化
- 作者：Naohiko OYASATO;Hideki KOBAYASHI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
33.DOE Based Robust Optimization Considering Tolerance Bands of Design Parameters

机译：美国能源部建立鲁棒优化考虑公差带的设计参数
- 作者：Jongsoo LEE;Byongchul AHN
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
34.A Study of the Solid Freeform Fabrication (SFF) System with Dual Laser System

机译：对固体成形技术的研究(设定触发器)系统与双激光系统
- 作者：Dong Soo KIM;Young Jin AHN;Won Hee LEESung Woo BAEKyung Hyun CHOI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
35.5-Axis Control Tool Path Generation Using Curved Surface Interpolation

机译：五轴控制使用弯刀位轨迹生成表面插值
- 作者：Masatoshi MORIKAWA;Tohru ISHIDA;Koji TERAMOTOYoshimi TAKEUCHI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
36.Precision Fabrication of a Large-Area Sinusoidal Surface Using a Fast-Tool-Servo Technique: Improvement of Local Fabrication Accuracy

机译：精密制造大面积的正弦表面使用一种快速伺服机构的技术:改善当地的制造精度
- 作者：Wei GAO;Makoto TANO;Takeshi ARAKISatoshi KIYONO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
37.Life-Time Analysis of Modules for Reuse in Inverse Manufacturing

机译：一生的分析模块重用的逆制造业
- 作者：Yong JI;Hirohisa NARITA;Lian-yi CHENHideo FUJIMOTO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
38.Development of Prediction System for Environmental Burden for Machine Tool Operation (1st Report, Proposal of Calculation Method for Environmental Burden)

机译：预测系统的开发环境负担机床操作(1日报道,建议的计算方法对环境负担)
- 作者：Hirohisa NARITA;Hiroshi KAWAMURA;Takashi NORIHISALian-yi CHENHideo FUJIMOTOTakao HASEBE
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
39.Thermal Error Modeling of a Machining Center Using Grey System Theory and Adaptive Network-Based Fuzzy Inference System

机译：加工中心的热误差建模使用灰色系统理论和自适应基于网络的模糊推理系统
- 作者：Kun-Chieh WANG;Pai-Chung TSENG;Kuo-Ming LIN
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
40.Coefficient of Friction between Tool and Material in Shearing

机译：工具和材料之间的摩擦系数在剪切
- 作者：Masahiro SASADA;Kazuki SHIMURA;Isamu AOKI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
41.Experimental Study of Collision Motion, Contact Force and Adhesion Force of Hemispherical Sliders with Stationary Magnetic Disks

机译：实验研究的碰撞运动,接触力和粘附力的半球形滑块与固定磁磁盘
- 作者：Kyosuke ONO;Kenji NAKAGAWA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
- van der Waals forces;
- Nanotribology;
- Magnetic disk storageCONTACT FORCEadhesion force;
42.The Controllable Ball Joint Mechanism

机译：控制球联合机制
- 作者：Yung Cheng TUNG;Wei-Hua CHIENG;ShrWai HO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
43.Fundamental Research on Hobbing with Minimal Quantity Lubrication of Cutting Oil (Effect of Cutting Speed)

机译：在滚齿机上基础研究最小数量润滑切削油的影响切削速度)
- 作者：Hironori MATSUOKA;Yoshihiro TSUDA;Satoshi SUDAHideo YOKOTA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
44.Quantitative Evaluation of Strain Near Tooth Fillet by Image Processing

机译：定量评价牙齿附近的应变角的图像处理
- 作者：Tomoya MASUYAMA;Satoshi YOSHIIZUMI;Katsumi INOUE
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
45.A Study on the Development of the Off-Line Software for Regulating the 6 D.O.F Circular Fixator

机译：研究开发的离线软件规范6 D.O.F循环固定器
- 作者：Bum-Seok PARK;In-Ho CHOI;Jin-Woo KIMSeung-Yeol LEEChang-Soo HAN
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
46.Stability Analysis of a Pipe Conveying Periodically Pulsating Fluid Using Finite Element Method

机译：管道输送的稳定性分析使用有限元周期性脉动流体方法
- 作者：Weui Bong JEONG;Young Soo SEO;Seok Hyeon JEONGSeong Hyeon LEEWan Suk YOO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
- Average speed;
- Fluid;
- Finite element methodConveyingcritical velocityStability analysisPipe;
47.Complete Parameter Identification of Gough-Stewart Platform with Partial Pose Measurements

机译：完整的Gough-Stewart参数识别平台部分构成测量
- 作者：Abdul RAUF;Jeha RYU
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
- kinematic calibration;
- Platform;
- kinematicsParameter identificationmeasuring instrumentsPartial;
48.Subjective Evaluations of Motion Area and Velocity Characteristics of Dual Manipulator in Young and Elderly People

机译：主观评价和速度的运动区域双机械手在年轻的特征老年人
- 作者：Mitsumasa YODA;Asako YODA;Yasuhito SHIOTA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
49.A New Algorithm for Bi-Directional Evolutionary Structural Optimization

机译：双向进化的新算法结构优化
- 作者：Xiaodong HUANG;Yi Min XIE;Mark Cameron BURRY
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
50.MRAC Combined Neural Networks for Ultra-Sonic Motor

机译：模型参考自适应神经网络对超声波相结合电动机
- 作者：Kanya TANAKA;Yoshie YOSHIMURA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
51.Application of Neural Networks to MRAC for the Nonlinear Magnetic Levitation System

机译：应用神经网络模型参考自适应的非线性磁悬浮系统
- 作者：Agus TRISANTO;Muhammad YASSER;Ayman HAGGAGJianming LUTakashi YAHAGI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
52.Shape Control of Cable-Network Structures Based on Concept of Self-Equilibrated Stresses

机译：基于形状的控制有线网络结构Self-Equilibrated压力的概念
- 作者：Hiroaki TANAKA;M.C. NATORI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
53.Location-Driven Image Retrieval for Images Collected by a Mobile Robot

机译：Location-Driven图像检索的图像收集的移动机器人
- 作者：Kanji TANAKA;Mitsuru HIRAYAMA;Nobuhiro OKADAEiji KONDO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
54.System Identification and 6-DOF Hovering Controller Design of Unmanned Model Helicopter

机译：系统识别和6自由度盘旋控制器设计的无人直升机模型
- 作者：Byeongil KIM;Yushin CHANG;Man Hyung LEE
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
55.Efficient Modeling Method of Vehicle Dynamics Operating at a Low Speed and Its Application to Non-Linear Optimal Controller Design

机译：高效的车辆动力学建模方法在较低的速度和它的应用程序非线性最优控制器设计
- 作者：Young Woo KIM;Sinya MATSUZAKI;Tatsuo NARIKIYO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
56.A Study on Robot-Human System with Consideration of Individual Preferences (2nd Report, Multimodal Human-Machine Interface for Object-Handing Robot System)

机译：研究Robot-Human系统考虑个人偏好(2日报告,多通道人机界面Object-Handing机器人系统)
- 作者：Mitsuru JINDAI;Satoru SHIBATA;Tomonori YAMAMOTOTomio WATANABE
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
57.Functional Based Adaptive and Fuzzy Sliding Controller for Non-Autonomous Active Suspension System

机译：基于功能的适应性和模糊滑动控制器为非自治活动暂停系统
- 作者：Shiuh-Jer HUANG;Hung-Yi CHEN
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
58.Magnetic Suspension Actuator Control in Ball and Beam System Demonstration

机译：磁悬浮球和致动器控制梁系统演示
- 作者：Chin E. LIN;Cheng Chang KER;Rong Tyai WANG
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
59.Attitude Control of a Rhoenrad by Internal Mass Motion

机译：姿态控制Rhoenrad的内部质量运动
- 作者：Tsuyoshi MITARAI;Kyosuke ONO;Hiroshi YAMAURA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
- spiral motion;
- internal mass;
- SpiralControl Methodssteady motionattitude control;
60.Tunnel Ventilation Control Using Reinforcement Learning Methodology

机译：隧道通风控制使用钢筋学习方法
- 作者：Baeksuk CHU;Dongnam KIM;Daehie HONGJooyoung PARKJin Taek CHUNGTae-Hyung KIM
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2006年第4期
61.An Energy Method for Analysing Deep Drawing Process by Simulated Annealing Optimization Algorithm

机译：分析拉深的能量法过程模拟退火优化算法
- 作者：Ahmad ASSEMPOUR;Mohammad GANDOMKAR
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
62.Enhancement of the TFS Method by Removing Bias Errors in FRf

机译：TFS的增强方法通过消除偏见频中的错误
- 作者：Se Jin AHN;Seung Yup KIM;Ho Kyeong JEONGWeui Bong JEONGWan Suk YOO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
63.Optimization of Double Loop Control Parameters for a Variable Displacement Hydraulic Motor by Genetic Algorithms

机译：双重循环控制参数的优化一个变量位移液压马达遗传算法
- 作者：Kyoungkwan AHN;JangHwan HYUN
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
64.Proposal of Heuristic Algorithm for Scheduling of Print Process in Auto Parts Supplier

机译：建议调度的启发式算法打印过程中汽车零部件供应商
- 作者：Shimpei MATSUMOTO;Koji OKUHARA;Nobuyuki UENOHiroaki ISHII
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
65.Modeling Approach of Functional Model for Multidomain System

机译：功能模型的建模方法多畴的系统
- 作者：Lirong WANG;Jiacai WANG;Ichiro HAGIWARA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
66.Vibration Control Using a State Observer that Considers Disturbances of a Golf Swing Robot

机译：振动控制使用一个状态观测器考虑干扰的高尔夫球挥杆的机器人
- 作者：Yohei HOSHINO;Yukinori KOBAYASHI;Gen YAMADA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
67.Random Invariant Measure of Delayed-Feedback

机译：随机延迟反馈的不变测度
- 作者：Katsutoshi YOSHIDA;Keijin SATO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
68.Hybrid Branch and Bound Method with Genetic Algorithm for Flexible Flowshop Scheduling Problem

机译：混合分支界限法与遗传方法算法灵活Flowshop调度问题
- 作者：Hiroshi MORITA;Naoki SHIO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
- Completion time;
- Branch and bound methods;
- Genetic Algorithm (GA)reduction index;
69.Evaluation of Tool Allocation Strategies in Flexible Manufacturing System

机译：评估工具分配策略柔性生产系统
- 作者：Xiaoming ZHANG;Susumu FUJII;Toshiya KAIHARA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
- MACHINE LOADING;
- allocation;
- Flexible manufacturing systemsManufacturing systems;
70.Capacity Planning to Optimize the Profit of an Apparel Manufacturer in Developing Country

机译：容量规划优化的利润在发展中国家服装制造商
- 作者：Kader Md. MOHAFIQUL;Hirohisa NARITA;Lian-Yi CHENHideo FUJIMOTO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
- EXITS;
- Developing Countries;
- profitsCapacity planningApparelcargo;
71.Interactive Multi-Shift Scheduling to Satisfy Worker's Preferences on Shift and Days-off

机译：交互式变速调度来满足工人的偏好转移和天休假
- 作者：Gakuhei SHIOTANI;Kenji YURA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
72.Online Scheduling Aiming to Satisfy Due Date for Flexible Flow Shops

机译：在线调度旨在满足到期日期灵活的流动商店
- 作者：Koichiro TAKAKU;Kenji YURA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
73.Methods of Transposition of Nurses between Wards

机译：护士在病房之间的换位的方法
- 作者：Shigeji MIYAZAKI;Masakazu MASUDA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
- Nursing Staff;
- Home Health Nursing;
- hospitalComputer aided analysisPatients' Rooms;
74.A Sequencing Problem for Mixed-Model Assembly Line with the Aid of Relief-Man

机译：混合模式的排序问题生产线借助Relief-Man
- 作者：Jae Kyu YOO;Yoshiaki SHIMIZU;Rei HINO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
75.Design of a Non-Overshooting PID Controller with an Integral Sliding Perturbation Observer for Motor Positioning Systems

机译：Non-Overshooting PID控制器的设计积分滑动扰动观测器汽车定位系统
- 作者：Yu-Sheng LU;Chao-Min CHENG
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第1期
76.Vibration Isolation by a Variable Stiffness and Damping System

机译：变刚度和振动隔离阻尼系统
- 作者：Yanqing LIU;Hiroshi MATSUHISA;Hideo UTSUNOJeong Gyu PARK
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
77.An Augmented Lagrangian Approach for Scheduling Problems (Application to Total Weighted Tardiness Problems)

机译：一个增广拉格朗日方法进行调度问题(应用加权总迟到问题)
- 作者：Tatsushi NISHI;Masami KONISHI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
- Tardiness;
- Lagrangian;
- Feasible Solution;
78.Finite Element Analysis Considering Material Inhomogeneousness of Bone Using 'ADVENTURE System'

机译：有限元分析考虑材料Inhomogeneousness骨用的冒险系统”
- 作者：Daisuke TAWARA;Jiro SAKAMOTO;Juhachi ODA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
79.Simultaneous Processing Method for Micro-Rods and Holes Using EDM

机译：同时Micro-Rods和处理方法使用电火花小孔
- 作者：Minoru YAMAZAKI;Noritosi MORI;Takemi SUZUKIMasanori KUNIEDA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
80.A Tactile Recognition System Mimicking Human Mechanism for Recognizing Surface Roughness

机译：触觉识别系统模仿人类识别表面粗糙度的机制
- 作者：Masahiro OHKA;Takuya KAWAMURA;Tastuya ITAHASHIJyun-ichi TAKAYANAGITetsu MIYAOKAYasunaga MITSUYA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
81.Manufacturing Feature Recognition Method for the Generation of Multiple Process Plans

机译：制造特征识别方法代的多个进程计划
- 作者：Koichi ANDO;Hendry MULJADI;Makoto OGAWA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
- Feature extraction;
- Process design;
- CASZ1 geneSystems planningMultiple processes;
82.Analysis of Dynamic Characteristics of Spiral-Grooved Journal Bearing with Considering Cavitation Occurrence

机译：动态特性的分析考虑螺旋槽径向轴承空化发生
- 作者：Tomoko HIRAYAMA;Takeo SAKURAI;Hiroshi YABE
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
83.Dynamic Modeling of Hydraulic Power Steering System with Variable Ratio Rack and Pinion Gear

机译：液压动力转向系统的动态建模系统变量比齿条和小齿轮
- 作者：Nong ZHANG;Miao WANG
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
84.Role Architecture in Architecture in Developing New Drafting Tools

机译：建筑在建筑发展中作用新的绘图工具
- 作者：Arzu Gonenc SORGUC
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
85.Role of System Architecture in Architecture in Developing New Drafting Tools

机译：系统架构在建筑中的作用开发新的绘图工具
- 作者：Arzu Goenenc SORGUC
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
86.On the Motion of the Aircraft under Alternate Wing Pressure Loading

机译：在飞机的运动替代翼压力加载
- 作者：Lazarus Teneketzis TENEK
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
- Computational modeling;
- Wings;
- Pressurerigid body motionAircraftAlternate;
87.The Integrated Simulation Analysis on 6-DOF Electrohydraulic Servo-Control Parallel Platform

机译：6自由度上的集成仿真分析电液伺服并联平台
- 作者：Cheng LIN;Liangcheng REN
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
88.Dynamic Analysis of a Multibody System Including a Very Flexible Beam Element

机译：多体系统包括一个动态分析非常灵活的梁单元
- 作者：Jong-Hwi SEO;Il-Ho JUNG;Tae-Won PARKJang-Bom CHAI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
89.Reverse Engineering and CAE

机译：逆向工程和CAE
- 作者：Masashi ENDO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
90.Finite Element Analysis Based on Volume CAD

机译：基于体积CAD的有限元分析
- 作者：Tomoshi MIYAMURA;Tomonori YAMADA;Hiroshi AKIBAAkitake MAKINOUCHICristian TEODOSIU
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
91.A Proposal of the Topology CAD and CAE Integrated System for the Next Generation

机译：提议的拓扑结构CAD和CAE集成系统的下一代
- 作者：Yasuhiko YOSHIDA;Eiji SHIIBA;Hiroshi YAMAGUCHI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
92.Development of the Internet-Based Customer-Oriented Ordering System Framework for Complicated Mechanical Product

机译：基于互联网的发展面向客户的订购系统框架复杂的机械产品
- 作者：Mingwei ONG;Keiichi WATANUKI
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
93.Trends and Solutions in CAD/CG

机译：趋势在CAD / CG和解决方案
- 作者：Vladimir SAVCHENKO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
94.2D Local Sample-Based Interpolation as a Tool for Approximation of 3D Point Sets

机译：2 d局部插值纸浆包作为一种工具三维点集的近似
- 作者：Vladimir SAVCHENKO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
- noisy data;
- discrete data;
- data smoothingSETTINGQuadricFINITE ELEMENTapproximationCoordinates;
95.Local Sharp Feature Generation and Shape Control of Recursive Subdivision Surface

机译：当地尖锐特征生成和形状控制递归细分表面
- 作者：Bing-Yin REN;Xiao-Dong LI;Zhuo-Qi WUIchiro HAGIWARA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
- surface modeling;
- Shape control;
- Recursive;
96.Wavelet Domain Image Reconstruction by Compactly-Supported Radial Basis Functions

机译：小波域图像重建紧支撑径向基函数
- 作者：Luis A. DIAGO;Masaki KITAGO;Ichiro HAGIWARA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
97.C~1 Smooth Triangular Surface Patch Constructed by C-curves

机译：由C ~ 1光滑表面三角补丁C-curves
- 作者：Wei LI;Ichiro HAGIWARA;Zhuoqi WU
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
- Surface treatment;
- Modeling;
- Helixtriangular patchTensor products;
98.C{sup}1 Smooth Triangular Surface Patch Constructed by C-curves

机译：C{10} 1光滑三角形的表面补丁由C-curves
- 作者：Wei LI;Ichiro HAGIWARA;Zhuoqi WU
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
- First Derivative;
- Surface treatment;
- ModelingHelixtriangular patchTensor products;
99.A Two-Level Iterative Method for Image Reconstruction with Radial Basis Functions

机译：两级图像的迭代方法重建与径向基函数
- 作者：Frederic MAGOULES;Luis A. DIAGO;Ichiro HAGIWARA
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期
100.An Approach to Improving Triangular Surface Mesh

机译：一个方法来改善表面三角网格
- 作者：Maria SAVCHENKO;Olga EGOROVA;Ichiro HAGIWARAVladimir SAVCHENKO
- 期刊名称：《JSME International Journal, Series C. Mechanical Systems, Machine Elements and Manufacturing》 | 2005年第2期

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号