首页>外文期刊>交通运输>水路运输>Journal of Middle European construction and design of cars

Journal of Middle European construction and design of cars

中文名称：中欧汽车结构与设计杂志

ISSN：1214-0821
出版周期：Quarterly

发文量：141

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.AUTONOMOUS DRIVING ALGORITHMS IN SCALED ENVIRONMENT

机译：规模化环境中的自动驾驶算法
- 作者：GABRIELA ACHTENOVA;ONDREJ KOREC
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2011年第3期
- SCALED MODEL;
- ADAPTIVE CRUISE CONTROL;
- PATH FOLLOWING OF LEADING VEHICLE;
2.ENGINE CONTROL UNIT BASED ON THE Ni COMPACTRIO PLATFORM

机译：基于镍合金平台的发动机控制单元
- 作者：MICHALSTRAPKO;RADEKTICHANEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2011年第3期
- ENGINE CONTROL UNIT;
- COMPACTRIO;
- LABVIEW;
3.AERODYNAMIC CHARACTERISTICS COMPUTATION OF AN OPEN WHEEL RACING CAR

机译：敞篷赛车的气动特性计算
- 作者：JAN VANCURA;PAVEL NOVOTNY;ONDREJ BLATAK;PETR PORTES
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第1期
- aerodynamics;
- formula;
- scanner ATOS;
- downforce;
- aerodynamics elements;
4.FEASIBILITY OF 2-STROKE SI ENGINE CONCEPT USING STOICHIOMETRIC MIXTURE

机译：用化学计量比混合法测量二冲程SI发动机的可行性
- 作者：OLDRICH VITEK;JAN MACEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第1期
5.MEASUREMENT OF IGNITION DELAY

机译：点火延迟的测量
- 作者：KAREL PAV
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第1期
- ignition delay;
- start of combustion;
- Si engine;
- AVL indicom;
6.INFLUENCE OF INTAKE MIXTURE TEMPERATURE ON LOW LOAD ENGINE BEHAVIOUR AT OPTIMAL IGNITION TIMING

机译：最佳点火定时进气温度对低负荷发动机性能的影响
- 作者：LUBOMIR MIKLANEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第1期
- mixture temperature;
- three-way catalyst;
- ignition timing;
- low engine load;
7.AN ITERATIVE MODEL OF THE HEAT RELEASE PATTERN UTILIZING MULTI-PARAMETRIC LINEAR REGRESSION

机译：利用多参数线性回归的热释放模式迭代模型
- 作者：MARCEL SKAROHLID
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第1期
- Si gas engine;
- heat release pattern;
- effect factor;
- iterative method;
- polynomial function;
- multi -parametric linear regression;
- biogas;
- carbon monoxide;
- carbon dioxide;
- nitrogen;
- hydrogen;
- ethane;
- propane;
- butane;
8.COMPUTATIONAL TOOLS IN THE DEVELOPMENT OF A 3 KW STIRLING ENGINE

机译：3 KW斯特林发动机开发中的计算工具
- 作者：PAVEL NOVOTNY;VACLAV PISTEK;LUBOMIR DRAPAL
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第1期
- Stirling engine;
- FEM;
- MBS;
- CFD;
- fatigue;
9.EDITORIAL

机译：社论
- 作者：Gabriela Achtenova
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第1期
10.STUDY OF PRESSURE WAVE SUPERCHARGER POTENTIAL USING A ID APPROACH

机译：利用ID方法研究压力波超级增压势。
- 作者：LUDEK POHORELSKY;ZDENEK ZAK;JAN MACEK;OLDRICH VITEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第2期
- pressure wave supercharger;
- supercharging;
- id model;
- test rig;
- si engine;
- transient;
- boost control;
11.CHAMBER-TYPE IGNITION FOR AN SI ENGINE

机译：SI引擎的腔式点火
- 作者：STANISLAV BEROUN;VACLAV DVORAK;JOSEF BLAZEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第2期
- spark plug;
- ignition chamber;
- blast flame;
- cfd;
- experiment research;
- variability of working cycles;
- operating parameters;
12.INVERSE FORM OF A MULTI-ZONE MODEL OF COMBUSTION AND HEAT TRANSFER PROCESSES IN AN SI ENGINE

机译：SI发动机燃烧与传热过程的多区域模型的逆形式
- 作者：JIRI HVEZDA
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第2期
- si engine;
- zone model;
- inverse model;
- chemical equilibrium;
- combustion chamber geometry;
- simulation;
13.DETERMINATION OF THE RESIDUAL GAS FRACTION IN THE CYLINDER OF AN SI PISTON ENGINE

机译：SI活塞发动机气缸内残留气体馏分的测定。
- 作者：MANAT PAENGSAI;STANISLAV BEROUN
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第2期
- residual exhaust gas;
- back flow;
- computational model;
14.EDITORIAL

机译：社论
- 作者：Gabriela Achtenova
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第2期
15.DEVELOPMENT OF DESIGN ANALYSIS SYSTEM AND ITS APPLICATION FOR ENGINE CONCEPT MODELING

机译：设计分析系统的开发及其在发动机概念建模中的应用
- 作者：SERGII B0G0M0L0V;ANTONIN MIKULEC
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第2期
- knowledge database;
- software development;
- concept design;
16.DESCRIPTION OF KNOCK ONSET IN A TURBOCHARGED GAS ENGINE

机译：涡轮增压燃气发动机的爆震起因的描述
- 作者：VOJTECH KLIR;MICHAL TAKATS
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第2期
- knock;
- knock onset description;
- knock intensity;
17.EDITORIAL

机译：社论
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第4期
18.POWERTRAIN SIMULATION TOOL

机译：动力总成仿真工具
- 作者：ADAM BARÁK;LIBOR ČERVENKA;VOJTĚCH KLÍR
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第4期
- vehicle simulation;
- powertrain;
- consumption;
- CO_2 reduction;
- labview;
- vehicle dynamics;
- nedc;
19.ANALYSIS OF POWERSPLIT SYSTEMS WITH USE OF MATRIX METHOD

机译：用矩阵法分析配电系统
- 作者：GABRIELA ACHTENOVÁ;TOMÁŠ BUDINSKÝ
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第4期
- calculation of planetary mechanism;
- matrix method;
- powersplit transmissions;
- computational code;
- 'sungear";
20.SOLUTION OF POWERTRAIN FRICTION LOSSES USING A VIRTUAL ENGINE

机译：使用虚拟引擎解决动力总成摩擦损耗
- 作者：PAVEL NOVOTNÝ;VÁCLAV PÍŠTĚK;DAVID SVÍDA
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第4期
- virtual engine;
- mechanical losses;
- piston assembly;
- hydrodynamics;
- mixed lubrication;
21.WORKING CYCLE CHANGES BY EGR DELIVERY INTO INTAKE OF SI ENGINE IN A LOW LOAD

机译：在低负荷下通过EGR输送进入SI发动机的工作周期变化
- 作者：LUBOMÍR MIKLÁNEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第4期
- egr;
- pumping work;
- ignition timing;
- low engine load;
22.THE EFFECT OF LPG INJECTION ON COMBUSTION PERFORMANCE AND EMISSION CHARACTERISTICS OF A MPFI ENGINE

机译：LPG注入对MPFI发动机燃烧性能和排放特性的影响
- 作者：K. S. SHANKAR;P. MOHANAN
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第4期
- gasoline engine;
- lpg injection;
- combustion;
- engine performances;
- exhaust emissions;
- idle ignition timing;
23.ESTIMATION OF FRICTION LOSSES USING A SEMI-EMPIRICAL MODEL

机译：用半经验模型估计摩擦损失
- 作者：MILOSLAV EMRICH;DAVID FUENTE;JAN MACEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第4期
- friction losses;
- mechanical friction;
- combustion engine;
- simulation;
- semi-empirical model;
- oil viscosity;
- validation;
24.SIMULATING BOOST PRESSURE SYSTEM BY DIFFERENTIAL OR ALGEBRAIC EQUATIONS MODEL

机译：用微分或代数方程模型模拟增压系统
- 作者：JAN MACEK;OLDŘICH VÍTEK;LUDĚK POHOŘELSKÝ;ZDENĚK ŽÁK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2010年第4期
- 2-stroke engine;
- turbocharging;
- supercharging;
- differential equations model;
- algebraic model;
25.VIRTUAL ENGINE - A TOOL FOR NOISE AND VIBRATION SOLUTIONS

机译：虚拟引擎-噪声和振动解决方案的工具
- 作者：PAVEL NOVOTNY;VACLAV PISTEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2009年第1期
- powertrain dynamics;
- noise;
- fem;
- mbs;
- vibration;
26.THEORETICAL MODELING AND SIMULATION STUDIES OF CAVITATION IN LUBRICATING OILS

机译：润滑油空化的理论建模与仿真研究
- 作者：K. GANGADHARAN NAIR;T. P. ASHOK BABU
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2009年第1期
- sae oil;
- cavitation;
- bearing;
- reynolds equation;
- modeling;
- simulation;
27.STUDY OF THE RELIABILITY OF INTERNAL COMBUSTION ENGINES BY APPLICATION OF A WEIBULL MODEL IN BANDS

机译：用带内威布尔模型研究内部燃烧发动机的可靠性
- 作者：GABRIELE VIRZI MARIOTTI
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2009年第1期
- engine reliability;
- weibull distribution;
- oil consumption;
- cylinder wear;
28.HIGH-ENERGY IGNITION SYSTEM FOR LEAN-BURN HYDROGEN-AIR MIXTURES

机译：稀燃氢-空气混合物的高能点火系统
- 作者：MIROSLAV SVOBODA;MICHAEL FENKL
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2009年第1期
- ignition system;
- ignition discharge;
- arc discharge ignition;
- hydrogen-air mixture;
- spark plug;
- single-cylinder engine;
29.FRICTION LOSS ANALYSIS OF POWERTRAIN PARTS

机译：动力总成部件的摩擦损失分析
- 作者：PAVEL NOVOTNY;RICHARD AMBROZ;VACLAV PISTEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2009年第2期
- friction loss;
- electric dynamometer;
- mbs;
- virtual engine;
30.STRUCTURE MODELING OF THREADED MACHINE PARTS FOR CALCULATIONS USING FINITE ELEMENT ANALYSIS (FEA)

机译：基于有限元分析（FEA）的螺纹机械零件结构建模
- 作者：JAN HONCU
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2009年第2期
- threads;
- machine parts;
- finite element analysis;
31.GAS FUELLED ENGINE WITH HIGH POWER RATING

机译：高功率燃气发动机
- 作者：MICHAL TAKATS;JIRI VAVRA
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2009年第2期
- gas engine;
- natural gas;
- variable turbine geometry;
32.MULTI-ZONE MODEL OF COMBUSTION AND HEAT TRANSFER PROCESSES IN AN SI ENGINE

机译：SI发动机燃烧与传热过程的多区域模型
- 作者：JIRI HVEZDA
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2009年第2期
- si engines;
- zone model;
- chemical equilibrium;
- combustion chamber geometry;
- simulation;
33.EXPERIMENTAL AND MODEL DESCRIPTION OF ENGINE KNOCK IN A TURBOCHARGED SI ENGINE

机译：涡轮增压SI发动机中发动机冲击的实验和模型描述
- 作者：VOJTECH KLIR
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2009年第2期
- si engines;
- zone model;
- chemical equilibrium;
- combustion chamber geometry;
- simulation;
34.DIRECT MEASUREMENT OF IN-CYLINDER CHARGE COMPOSITION

机译：缸内电荷成分的直接测量
- 作者：JIRI VAVRA
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2009年第2期
- direct in-cylinder sampling;
- three pressure analysis;
- residual gas content;
35.MODEL BASED NONLINEAR PREDICTIVE CONTROL OF IC ENGINE

机译：发动机的基于模型的非线性预测控制
- 作者：VÍT DOLEČEK;JAN PELIKÁN;PETR DENK;ZBYNĚK ŠIKA
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2018年第2期
- SIMULATION MODEL;
- 1-D SIMULATION;
- CONTROL ALGORITHM;
- PREDICTIVE CONTROL;
- PREDICTIVE MODEL;
- LOLIMOT;
36.PHYSICAL MODEL OF SI-ENGINE PROCESS AND GAS EXCHANGE FOR REAL-TIME IMPLEMENTATION IN ENGINE MANAGEMENT SYSTEM

机译：引擎管理系统中实时执行的SI-引擎过程和气体交换的物理模型
- 作者：JAN FOŘTL;JOHANNES BEER;JENS KELLER;JAN MACEK;FREDRIK BORCHSENIUS
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2018年第2期
- ENGINE MODEL;
- GAS EXCHANGE;
- 1D/0D;
- ECU;
- REAL-TIME;
37.APPLICATION OF PREDICTIVE COMBUSTION MODEL TO CI ICE BASED ON LES AND CHEMICAL KINETICS

机译：基于LES和化学动力学的预测燃烧模型在冰上的应用
- 作者：OLDŘICH VÍTEK;VÍT DOLEČEK;MARCEL DIVIŠ;JAN MACEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2018年第2期
- LES;
- CFD;
- CHEMICAL KINETICS;
- COMPRESSION IGNITION;
- SIMULATION;
- NO_x FORMATION;
- IGNITION DELAY;
38.TURBOCHARGING OF HIGH PERFORMANCE COMPRESSED NATURAL GAS SI ENGINE FOR LIGHT DUTY VEHICLE

机译：高性能压缩天然气SI发动机的轻型汽车涡轮增压
- 作者：MARCEL SKAROHLID;JIRI VAVRA
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2018年第1期
- CNG ENGINE;
- MILLER CYCLE;
- VALVE TIMING;
- TURBOCHARGER;
39.IMPLICATION OF CYCLE-TO-CYCLE VARIABILITY IN SI ENGINES

机译：SI引擎中的周期间变异性的含义
- 作者：KAREL PAV
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2018年第1期
- SI ENGINE;
- CYCLE-TO-CYCLE VARIABILITY;
- ADAPTIVE COMBUSTION MODEL;
- SPARK TIMING;
- IGNITION DELAY;
- VARIABILITY FACTOR;
- FUEL CONSUMPTION;
40.IDENTIFICATION OF CYCLE-TO-CYCLE VARIABILITY SOURCES IN SI ICE BASED ON CFD MODELING

机译：基于CFD建模的SI ICE周期间变异性源识别
- 作者：OLDRICH VlTEK;VIT DOLECEK;ZBYNEK SYROVATKA;JAN MACEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2018年第1期
- LARGE EDDY SIMULATION (LES);
- CFD;
- SI ICE;
- CYCLE-TO-CYCLE VARIATION (CCV);
- MULTI-CYCLE CALCULATIONS;
41.PHYSICAL ID MODEL OF A HIGH-PRESSURE RATIO CENTRIFUGAL COMPRESSOR FOR TURBOCHARGERS

机译：涡轮增压器高压比例离心压缩机的物理ID模型
- 作者：JAN MACEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2018年第1期
- CENTRIFUGAL COMPRESSOR;
- 1D SIMULATION;
- PHYSICAL MODEL OF COMPRESSOR MAP;
- TRANSONIC PERFORMANCE;
- RADIAL DIFFUSER;
42.AUTONOMOUS VEHICLES AND EUROPEAN DATA PROTECTION LAW

机译：自动车辆和欧洲数据保护法
- 作者：EVA FIALOVA
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2020年第1期
- AUTONOMOUS VEHICLES;
- DATA PROTECTION;
- GDPR;
- PRIVACY;
43.TESTING OF AUTOMATED DRIVING SYSTEMS

机译：测试自动化驾驶系统
- 作者：ONDREJ VACULIN;MICHAEL GELLRICH;ROBERT MATAWA;STIFFEN WITSCHASS
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2020年第1期
- AUTOMATED DRIVING;
- TESTING;
- TESTING SCENARIOS;
44.DEVELOPMENT OF A CONTROL ALGORITHM FOR A PARALLEL HYBRID POWERTRAIN

机译：并行混合动力系的控制算法的开发
- 作者：PETR KOHEL;RASTISLAV TOMAN
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2020年第1期
45.NEW ADVANCED METHODS IN SIDE CRASH TESTING

机译：侧面碰撞测试中的新先进方法
- 作者：JAKUB JELINEK;MILAN RUZICKA;ALZBETA KAFKOVA
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2020年第2期
- CRASH TEST;
- FINITE ELEMENT METHOD;
- DESIGN OF EXPERIMENT;
- BIOMECHANICAL LOADS;
- DYCOT;
- ALIS;
46.SOFTWARE FOR THE DESIGN OF GEARING WITH AN ASYMMETRIC PROFILE

机译：具有不对称型材的齿轮设计的软件
- 作者：ONDREJ MILACEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2020年第2期
- ASYMMETRIC;
- INVOLUTE;
- GEARING;
- EXTERNAL;
- ANIMATION;
- TIP CHAMFER;
- PROTUBERANCE;
- RACK;
47.EVALUATION OF PLUG-IN PARALLEL HEV TOPOLOGIES USING OPTIMAL CONTROL METHODS AND VEHICLE DYNAMICS SIMULATION

机译：使用最优控制方法和车辆动力学仿真评估插件并联HEV拓扑拓扑
- 作者：RASTISLAV TOMAN;JOLANA HERMANOVA
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2020年第2期
48.IN-CYLINDER FLOW CHARACTERIZATION USING VORTICITY BASED PARAMETERS

机译：IN-CYLINDER FLOW CHARACTERIZATION USING VORTICITY BASED PARAMETERS
- 作者：PETR HATSCHBACH;OLDRICH VITEK;RADEK TICHANEK
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2021年第1期
- IN-CYLINDER FLOW;
- SWIRL NUMBER;
- TUMBLE NUMBER;
- VORTICITY;
49.RANGE EXTENDER ICE MULTI-PARAMETRIC MULTI-OBJECTIVE OPTIMIZATION

机译：RANGE EXTENDER ICE MULTI-PARAMETRIC MULTI-OBJECTIVE OPTIMIZATION
- 作者：MIKULAS ADAMEK;RASTISLAV TOMAN
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2021年第1期
50.CRITICAL SHIFTING WINDOW IN SWITCHABLE ROCKER FINGER FOLLOWER

机译：CRITICAL SHIFTING WINDOW IN SWITCHABLE ROCKER FINGER FOLLOWER
- 作者：PETR KOHOUT;JAN KINDERMANN
- 期刊名称：《Journal of Middle European construction and design of cars》 | 2021年第1期
- CAM;
- CAM PROFILE;
- CAM DESIGN;
- SWITCHABLE ROLLER FINGER FOLLOWER;
- TOLERANCES;
- STACK UP;
- SHIFTING WINDOW;
- CAE;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号