首页>外文期刊>Journal of Composites Technology & Research

Journal of Composites Technology & Research

SCI

中文名称：复合材料技术与研究

ISSN：0884-6804
出版周期：Quarterly

发文量：174

期刊论文

热门论文

年度选择

更多>>

全选（0）

1.A Simple Discrete-Tow Model for Analysis of Textile Composites

机译：纺织品复合材料分析的简单离散模型
- 作者：Carrier C. R;Averill R. C.
- 期刊名称：《Journal of Composites Technology & Research》 | 2000年第4期
- textile composite materials;
- discrete tow model fiber tows;
- resin;
2.A new compression test fixture for Untotched or notched or notched thin composite laminates

机译：一种新的压缩测试夹具，用于无缺口或有缺口或有缺口的薄复合材料层压板
- 作者：Bardis J.D.;Kedward K.T.
- 期刊名称：《Journal of Composites Technology & Research》 | 2000年第3期
- polymer matrix composite laminates;
- open hole compression;
- compression strength;
- test fixture;
- specimen geometry;
3.Residual Strength-Based Life Predictions of Composite Materials Under Combined Damage Mechanisms

机译：组合损伤机理下复合材料基于残余强度的寿命预测
- 作者：Halverson H. G;Case S. W.
- 期刊名称：《Journal of Composites Technology & Research》 | 2000年第4期
- residual strength;
- life prediction;
- micromechanics;
- simulation;
- stress rupture;
4.Effect of high-frequency low-amplitude impact loads on polymeric composites

机译：高频低振幅冲击载荷对聚合物复合材料的影响
- 作者：R.Thomas;R.Krishnamurthy
- 期刊名称：《Journal of Composites Technology & Research》 | 2000年第1期
- graphite-epoxy composite;
- high-frequency impact;
- stiffness;
- permanent set;
- hysteresis work;
5.Fiber-Reinforced Composite and Wood Bonded Interfaces: Part 1. Durability and Shear Strength

机译：纤维增强的复合材料和木结合界面：第1部分。耐久性和剪切强度
- 作者：Davalos J. F;Qiao P. Z.
- 期刊名称：《Journal of Composites Technology & Research》 | 2000年第4期
- fiber-reinforced plastics;
- wood;
- durability;
- delamination;
- shear strength;
- bonded interface;
- coupling agents;
6.Scaling of first-ply failure and strength in (+#theta#_n/-#theta#_n/90_(2n))_s laminates: experiments and predictions

机译：（+＃theta＃_n /-＃theta＃_n / 90_（2n））_ s层压板中第一层破坏和强度的缩放比例：实验和预测
- 作者：Lavoie J.A.;Morton J.
- 期刊名称：《Journal of Composites Technology & Research》 | 2000年第3期
- matrix cracking;
- first-ply failure;
- delamination;
- strength scaling;
- composite laminate;
7.A Life Prediction Methodology for Thick Section Composites Used in Civil Infrastructure

机译：用于民用基础设施的厚截面复合材料的寿命预测方法
- 作者：Senne J.;Lesko J. J.
- 期刊名称：《Journal of Composites Technology & Research》 | 2000年第4期
- delamination;
- out-of-plane failure;
- fatigue;
- life prediction;
- hybrid;
- fiber-reinforced polymer composites;
8.Numerically Based Compliance Calibration for Steel Frame Assisted Tension Specimen

机译：基于数字的钢框架拉伸试样的柔顺性标定
- 作者：S. Yotte and J. M. Quenisset
- 期刊名称：《Journal of Composites Technology & Research》 | 2000年第2期
- SFAT specimen;
- composite;
- compliance;
- toughness testing;
9.Evaluation of the Effect of a custom fiber surface treatment on the adhesion level in a polymer-based composite using the single fiber fragmentation test

机译：使用单纤维断裂试验评估定制纤维表面处理对聚合物基复合材料中粘合度的影响
- 作者：D. Bradford;K. Lease
- 期刊名称：《Journal of Composites Technology & Research》 | 2000年第2期
10.Biaxial and Triaxial Failure Strengths of 6061 - T6 Aluminum and AS4/3501-6 Carbon/Epoxy Laminates Obtained by Testing Thickness-Tapered Cruciform Specimens

机译：通过测试锥度十字形试样获得的6061-T6铝和AS4 / 3501-6碳/环氧层压板的双轴和三轴破坏强度
- 作者：Jeffry S. Welsh;Donald F. Adams
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第2期
- cruciform;
- uniaxial;
- biaxial;
- triaxial;
- testing;
11.Viscoelastic Modeling of Press-Fitted Composite Cylinders

机译：压入配合式圆柱体的粘弹性建模
- 作者：J.T.Tzeng
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第1期
- interference stress;
- anisotropy;
- viscoelasticity;
12.Adaptation of the Iosipescu In-plane Shear Test Method for High Strength Textile Composites

机译：Iosipescu面内剪切测试方法对高强度纺织复合材料的适应性
- 作者：Waruna P. Seneviratne;John S. Tomblin
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第4期
- textile composites;
- braided composites;
- in-plane shear;
- Iosipescu;
13.Drilling Damage of GFRP and Residual Mechanical Behavior - Part II: Static and Cyclic Bearing Loads

机译：GFRP的钻孔损伤和残余机械性能-第二部分：静载荷和循环载荷
- 作者：Edoardo Capello;Vincenzo Tagliaferri
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第2期
- drilling damage;
- GFRP laminate;
- static strength;
- fatigue;
14.A Technique for Measuring Delamination Crack Tip Behavior in Composite Materials Inside a Scanning Electron Microscope

机译：扫描电子显微镜内测量复合材料分层裂纹尖端行为的技术
- 作者：Isabelle Paris;Roger Bennett;Mary Mager
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第3期
- fracture mechanics;
- delamination;
- in situ;
- crack tip behavior;
- crack opening displacement;
- crack shear displacements;
- scanning electron microscope (SEM);
- Mode I;
- Mode II;
- mixed mode;
15.Evaluation of Film-Substrate Interface Durability Using a Shaft-Loaded Blister Test

机译：使用轴加载的泡罩测试评估膜-基底界面的耐久性
- 作者：Kin Liao;Kai-Tak Wan
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第1期
- blister test;
- film-substrate system;
- deformation;
16.A Damage Evolution Model for Viscoelastic Composite Laminates

机译：粘弹性复合材料层合板的损伤演化模型
- 作者：N.V.Akshantala;L.C.Brinson
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第1期
17.Single-Fiber Fragmentations of AS-4 Carbon Fiber Embedded in Epon 828 Under the Effect of Elevated Temperatures

机译：高温影响下嵌入Epon 828的AS-4碳纤维的单纤维断裂
- 作者：M.B.Walther;K.L.Reifsnider;M.Madhukar
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第1期
- fiber/matrix interface;
- critical fragmentation length;
- temperature;
- interfacial shear strength;
- elasticity model;
- thermodynamic model;
18.Low Degree of Homogeneity Due to Phase Shifts for Woven Composites

机译：织造复合材料的相移导致均质度低
- 作者：Kyeongsik Woo;Young W. Suh
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第4期
- woven composites;
- phase shift;
- effective properties;
- Monte Carlo simulation;
- macroelement;
19.Bridging Stress Distributions During Fatigue Crack Growth in Continuously Reinforced (O) Metal Matrix Composites

机译：连续增强（O）金属基复合材料疲劳裂纹扩展过程中的桥接应力分布
- 作者：Reji John;Dennis J. Buchanan
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第2期
- bridging stress;
- bridging stress intensity factor;
- crack growth;
- fatigue;
- fiber bridging;
- metal matrix composite;
- shear lag;
- titanium matrix composite;
20.Shakedown Limits for a Metal Matrix Composite

机译：金属基复合材料的降低极限
- 作者：A. R. S. Ponter;K. F. Carter;J. M. Duggan
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第3期
- metal matrix composites;
- thermal stresses;
- shakedown;
- computational methods;
21.Interlaminar Deformation Along the Cylindrical Surface of a Hole in Laminated Composites-Experimental Analysis by Moire Interferometry

机译：层状复合材料中沿孔圆柱面的层间变形-莫尔干涉法的实验分析
- 作者：David H. Mollenhauer;Kenneth L. Reifsnider
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第3期
- polymer matrix composites;
- moiré interferometry;
- interlaminar deformation;
- open holes.;
22.Energy Absorption of Truncated Kevlar Epoxy Cones Under Off-Axis Loads

机译：轴负载下截断的凯夫拉环氧树脂的能量吸收
- 作者：Jennifer L. Knack;Anthony J. Vizzini
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第4期
- crashworthiness;
- energy absorption;
- truncated cone;
- Kevlar/epoxy;
- crushing;
- compression;
- buckling;
23.Effects of Chemical Environments on Pultruded E-Glass Reinforced Polyesters

机译：化学环境对拉挤电子玻璃纤维增强聚酯的影响
- 作者：Kathleen Van de Velde;Paul Kiekens
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第2期
- pultruded composites;
- chemical degradation;
- alkaline solutions;
- demineralized water;
- seawater;
- sulfuric acid;
- glass/polyester;
24.Drilling Damage of GFRP and Residual Mechanical Behavior - Part I: Drilling Damage Generation

机译：GFRP的钻井损伤和残余力学行为-第一部分：钻井损伤的产生
- 作者：Edoardo Capello;Vincenzo Tagliaferri
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第2期
- delamination;
- drilling;
- GFRP laminate;
- damage generation mechanism;
25.Effect of Twisting on Tensile Failure of Impregnated Yarns with Broken Filaments

机译：捻度对含丝断裂的浸渍纱线拉伸破坏的影响
- 作者：N. K. Naik;Ishe Mudzingwa;M. N. Singh
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第3期
26.Failure Analyses of +- 45 deg Off-Axis Woven Fabric Composite Specimens

机译：+-45度偏轴机织织物复合材料样本的失效分析
- 作者：G. Odegard;D. Armentrout;K. Searles
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第3期
- woven fabric composites;
- off-axis testing;
- FEM;
- graphite/PMR-15;
27.Matrix Properties of Textile Reinforced Ceramic Matrix Composites Measured by Nanoindentation

机译：纳米压痕法测量织物增强陶瓷基复合材料的基体性能
- 作者：D. L. Davidson;G. M. Pharr
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第2期
- nanoindentation;
- elastic modulus;
- hardness;
- matrix material;
- ceramic composite;
- porosity;
28.Strain Rate and Temperature Effects on the Mechanical Properties of an E-Glass/Vinyl Ester Composite System

机译：应变速率和温度对电子玻璃/乙烯基酯复合体系力学性能的影响
- 作者：Joseph T. South;Kenneth L. Reifsnider;Scott W. Case
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第3期
- E-glass;
- vinyl ester;
- strain rate;
- temperature;
- Monkmann-Grant;
29.Computational Tracking of Composite Manufacturing with Fiber Preforms

机译：纤维预制件的复合制造的计算跟踪
- 作者：Bertrand R. Mauget;Levon Minnetyan;Christos C. Chamis
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第4期
30.Abrasive Water Jet Machining Mechanisms in Continuous-Fiber Ceramic Composites

机译：连续纤维陶瓷复合材料的磨料水射流加工机理
- 作者：M. Ramulu;M. G. Jenkins;Z. Guo
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第2期
- continuous-fiber ceramic composites;
- abrasive water jet;
- machining;
- edge finishing;
- fiber direction;
- surface roughness;
- bending fracture;
- erosion;
- delamination;
31.Effect of Environment on Fracture Toughness and Debond Growth of Aluminum/FM73/Boron-Epoxy Adhesively Bonded Joints,

机译：环境对铝/ FM73 /硼-环氧胶粘接头断裂韧性和脱胶生长的影响，
- 作者：K.A.Lubke;L.M.Butkus;W.S.Johnson
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第1期
- durability;
- fatigue;
- composites;
- joints;
32.Delamination Growth and Thresholds in a Carbon/Epoxy Composite Under Fatigue Loading

机译：疲劳载荷下碳/环氧树脂复合材料的分层生长和阈值
- 作者：Leif E. Asp;Anders Sjogren;Emile S. Greenhalgh
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第2期
- composite materials;
- interlaminar fracture toughness;
- fatigue;
- Mode I;
- Mode II;
- mixed-mode bend test;
- delamination;
- fractography;
- failure mechanisms;
- shear cusps;
33.Effects of Resin Consolidation on the Durability of IM7/PETI-5 Composites

机译：树脂固结对IM7 / PETI-5复合材料耐久性的影响
- 作者：David R.Veazie;Josiah S.Lindsay;Emilie J.Siochi
- 期刊名称：《Journal of Composites Technology & Research》 | 2001年第1期
- polymer matrix composites;
- flexure;
- environmental exposure;
- resin consolidation;
- compression;
- moisture conditioning;
- nondestructive evaluation;
34.Adhesion of stainless steel to fiber reinforced vinyl ester composite

机译：不锈钢与纤维增强乙烯基酯复合材料的粘合力
- 作者：Melograna JD.;Grenestedt JL.
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第4期
- Adhesion;
- Surface preparation;
- Fiber reinforced composite;
- Stainless steel;
- Vinyl ester;
- Transverse tensile strength;
- Vacuum infusion;
35.Adhesive Bonding of Composite Structures

机译：复合结构的粘接
- 作者：L. J. Hart-Smith
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第3期
- adhesive bonding;
- joints;
- processing;
- surface preparation;
- volatiles;
36.The Design of In-Plane Shear and Ct bond Tension-Loaded Bonded Composite Lap Joints

机译：面内剪切和Ct粘结拉伸加载粘结复合搭接接头的设计
- 作者：Hyonny Kim;Keith T. Kedward
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第2期
- composite bonded lap joint;
- in-plane shear loading;
- combined loading;
37.A Design Procedure for Textile Composite Materials

机译：纺织复合材料的设计程序
- 作者：Yasser Gowayed;Larry Barowski
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第1期
- textiles;
- composites;
- design;
- numerical modeling;
- graphic and geometric modeling;
38.Temperature Effects on Ultimate Bearing Strength of Polymeric Composite Joints

机译：温度对聚合物复合材料接头极限承载力的影响
- 作者：W. A. Counts;W. S. Johnson
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第1期
- ply buckling;
- thermal aging;
- durability;
- compression;
- bearing strength;
39.In Memory of Don Oplinger

机译：纪念唐·奥普林格
- 作者：Larry B. Ilcewicz;Erian A. Armanios
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第2期
40.Adhesive bonding of composite structures - Progress to date and some remaining challenges

机译：复合结构的粘接-迄今为止的进展和一些尚存的挑战
- 作者：Hart-Smith LJ.
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第3期
41.The design of in-plane shear and tension-loaded bonded composite lap joints

机译：面内剪切-受拉粘结复合搭接设计
- 作者：Kim H.;Kedward KT.
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第2期
42.Three-Dimensional Effect in the Prediction of Flange Delamination in Composite Skin-Stringer Pull-off Specimens

机译：复合材料纵梁拉拔试样的法兰分层预测中的三维效应
- 作者：Jian Li
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第3期
43.Fatigue Life Methodology for Bonded Composite Skin/Stringer Configurations

机译：粘结复合蒙皮/纵梁配置的疲劳寿命方法
- 作者：Ronald Krueger;Isabelle L. Paris;T. Kevin OBrien
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第2期
- composite materials;
- testing;
- finite element analysis;
- fatigue life prediction;
- fracture mechanics;
- skin/flange interface;
44.Comparison of the +-450 deg Tensile and Iosipescu Shear Tests for Woven Fabric Composite Materials

机译：机织织物复合材料的+ -450度拉伸和Iosipescu剪切测试的比较
- 作者：M. Kumosa;G. Odegard;D. Armentrout
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第1期
- woven carbon/PMR-15 composite;
- losipescu test;
- +-45 deg tensile test;
45.Stress and Failure Analyses of Adhesive-Bonded Composite Joints Using ASTM D3165 Specimens

机译：使用ASTM D3165标本分析胶粘复合复合材料接头的应力和破坏
- 作者：Hai Huang;Chihdar Yang;John S. Tomblin
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第2期
- Composites;
- adhesive;
- bonded joints;
- lap joints;
46.Deflection measurements of laminated thin plates using electronic speckle pattern interferometry

机译：使用电子散斑图干涉法测量层压薄板的挠度
- 作者：Golda D.;Kedlaya D.;Pelegri AA.
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第4期
- Composite;
- Crack;
- Experiments;
- Failure;
- Fringe;
- Interferometry;
- Laminate;
- Laser;
- Speckle;
- Composites;
47.Characterization of Bondline Thickness Effects in Adhesive Joints

机译：粘合接头中粘结层厚度效应的表征
- 作者：John Tomblin;Pierre Harter;Waruna Seneviratne
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第2期
- adhesive;
- joint;
- lap shear;
- bondline thickness;
48.Characterization of bondline thickness effects in adhesive joints

机译：粘合接头中粘合层厚度效应的表征
- 作者：Tomblin J.;Harter P.;Seneviratne W.;Yang C.
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第2期
49.Fatigue life methodology for bonded composite skin/stringer configurations

机译：粘合复合材料蒙皮/纵梁构造的疲劳寿命方法
- 作者：Krueger R.;Paris IL.;OBrien TK.;Minguet PJ.
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第2期
50.Fiber dominant tensile and creep strength at 600 degrees C of SCS-6 fiber reinforced titanium alloys

机译：SCS-6纤维增强钛合金在600摄氏度时纤维的主要拉伸和蠕变强度
- 作者：Peters PWM.;Hemptenmacher J.;Weber K.;Assler H.
- 期刊名称：《Journal of Composites Technology & Research》 | 2002年第4期
- Titanium matrix composites;
- Sic-fiber;
- Fiber strength;
- Defects;
- Weibull strength distribution;
- Slow crack growth;
- High temperature;
- Creep;
- Relaxation;
- Composite;
51.EVALUATION OF THE EDGE CRACK TORSION (ECT) TEST FOR MODE III INTERLAMINAR FRACTURE TOUGHNESS OF LAMINATED COMPOSITES

机译：层状复合材料的III型层间断裂韧性的边缘裂纹扭转（ECT）试验评估
- 作者：Li J.;Lee EW.;Obrien TK.;Lee SM.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第3期
52.USING MEASURED DAMAGE PARAMETERS TO PREDICT THE RESIDUAL STRENGTH OF IMPACTED COMPOSITES - A NEURAL NETWORK APPROACH

机译：使用测得的损伤参数来预测冲击复合材料的残余强度-神经网络方法
- 作者：Highsmith AL.;Keshav S.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第4期
- Composite materials;
- Neural networks;
- Fiber fracture;
- Laminate;
- Robustness;
- Delamination;
- Mechanisms;
53.SEAWATER EFFECTS ON STRENGTH AND DURABILITY OF GLASS/EPOXY FILAMENT-WOUND TUBES AS REVEALED BY ACOUSTIC EMISSION ANALYSIS

机译：声发射分析显示的海水对玻璃纤维/环氧树脂细丝缠绕管的强度和耐久性的影响
- 作者：Chiou PL.;Bradley WL.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第4期
- Glass/epoxy;
- Composite tube;
- Seawater;
- Damage;
- Degradation;
- Acoustic emission;
54.IMPROVEMENT OF STRENGTH AND DUCTILITY OF ADHESIVELY BONDED JOINTS BY INCLUSION OF SIC WHISKERS

机译：通过添加SIC晶须来改善胶接接头的强度和延展性
- 作者：Taheri F.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第2期
- Adhesive bonding;
- Composite materials;
- Whisker reinforcement;
- Sic whiskers;
- Ductility;
- Repair;
- Energy-absorbing capacity;
- Toughened adhesive;
- Surface preparation;
- Interply;
- Stacking sequence;
55.COMPOSITE REPAIR OF A STAINLESS STEEL GRP SONAR DOME

机译：不锈钢GRP声纳球罩的复合修复
- 作者：Koko TS.;Corbett GV.;Connor MJ.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第4期
- Sonar dome;
- Glass-reinforced plastics;
- Composite material;
- Adhesive bonding;
- Machining;
- Composite repair;
- Stainless steel;
- Corrosion;
56.EFFECTS OF ENVIRONMENTAL EXPOSURE ON FIBER-REINFORCED PLASTIC (FRP) MATERIALS USED IN CONSTRUCTION

机译：环境暴露对建筑中使用的纤维增强塑料（FRP）材料的影响
- 作者：Chin JW.;Aouadi K.;Nguyen T.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第4期
- Alkaline conditions;
- Building technology;
- Composites;
- Durability;
- Polyester;
- Moisture;
- Saline conditions;
- Vinyl ester;
- Ultraviolet radiation;
57.(+/-45) DEGREE OFF-AXIS TENSION TEST FOR SHEAR CHARACTERIZATION OF PLAIN WEAVE FABRIC COMPOSITES

机译：（+/- 45）度轴向拉伸试验用于平纹织物复合材料的剪切表征
- 作者：Ganesh VK.;Naik NK.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第2期
58.THE EFFECT OF VOIDS ON THE ELASTIC PROPERTIES OF TEXTILE REINFORCED COMPOSITES

机译：空隙对纺织品增强复合材料弹性性能的影响
- 作者：Gowayed YA.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第3期
- Composites;
- Textiles;
- Fabrics;
- Voids;
- Mechanics;
- Elastic properties;
- Ceramic composites;
- Finite element;
- Ceramic-matrix composites;
- Mechanical-behavior;
- Inclusions;
- Tensile;
- Stress;
59.HOOP TENSILE STRENGTH AND FRACTURE BEHAVIOR OF CONTINUOUS FIBER CERAMIC COMPOSITE (CFCC) TUBES FROM AMBIENT TO ELEVATED TEMPERATURES

机译：连续纤维陶瓷复合材料（CFCC）管从室温到高温的环向拉伸强度和断裂行为
- 作者：Chuck L.;Graves GA.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第3期
60.EFFECT OF TIME-DEPENDENT MATRIX BEHAVIOR ON THE EVOLUTION OF PROCESSING-INDUCED RESIDUAL STRESSES IN METAL MATRIX COMPOSITES

机译：时基行为对金属基复合材料加工诱导残余应力演化的影响
- 作者：Ananth CR.;Chandra N.;Mukherjee S.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第3期
- Mmc;
- Residual stresses;
- Stress-relaxation;
- Creep;
- Finite element method;
- Constitutive model;
- Cool-down;
61.MACHINING OF FILLED POLYMERS USING SINGLE-EDGE TOOLS

机译：使用单边工具加工聚合物
- 作者：Karri V.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第2期
- Polymers;
- Cast nylon;
- Fillers;
- Machining;
- Surface finish;
- Cutting techniques;
62.THE WYOMING COMBINED LOADING COMPRESSION (CLC) TEST METHOD

机译：理想的组合载荷压缩（CLC）试验方法
- 作者：Adams DF.;Welsh JS.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第3期
- Cross-ply laminates;
- Composites;
- Compression;
- Composites;
- Strengths;
- Specimen;
63.FATIGUE BEHAVIOR OF A CROSS-PLY TITANIUM MATRIX COMPOSITE WITH TENSILE AND ZERO MEAN LOAD AT ELEVATED TEMPERATURE

机译：高温下具有拉伸和零均载荷的交叉层钛基复合材料的疲劳行为
- 作者：Mall S.;Boyum EA.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第2期
- Titanium matrix composites;
- Fatigue;
- Tension-tension;
- Tension-compression;
- Damage mechanisms;
- Plasticity;
- Mechanisms;
- Damage;
64.PROGRESSIVE FRACTURE OF COMPOSITE CYLINDRICAL SHELLS SUBJECTED TO EXTERNAL PRESSURE

机译：外力作用下复合圆柱壳的渐进断裂
- 作者：Minnetyan L.;Chamis CC.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第2期
- Composites;
- Composite structures;
- Compression;
- Damage;
- Degradation;
- Durability;
- External pressure;
- Fracture;
- Laminates;
- Simulation;
- Structural degradation;
65.STRAIN GAGE SELECTION CRITERIA FOR TEXTILE COMPOSITE MATERIALS

机译：纺织复合材料的应变片选择标准
- 作者：Masters JE.;Ifju PG.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第3期
- Textile composites;
- Braids;
- Weaves;
- Strain gage;
- Gage length;
- Modulus;
- Coefficient of variation;
- Unit cell;
66.MATRIX CRACKING OF HIGH-PERFORMANCE COMPOSITE LAMINATES WITH VARIATION OF LAMINATE STACKING SEQUENCE AND TESTING TEMPERATURE

机译：高性能复合层压板的矩阵开裂及其层压序列和测试温度的变化
- 作者：Huang XG.;Eduljee RF.;Gillespie JW.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第3期
- Matrix cracking;
- Laminate;
- Stacking sequence;
- Crack evolution;
- Residual stress;
- Temperature effect;
67.QUIKTEMP - A NEW SHORT-CYCLE-TIME MANUFACTURING METHOD FOR THERMOPLASTIC COMPOSITES MADE FROM LOW-COST TEXTILE PREFORMS

机译：QUIKTEMP-一种低成本的低成本瓶坯热塑复合材料的短周期制造新方法
- 作者：Stumpf H.;Schulte K.
- 期刊名称：《Journal of Composites Technology & Research》 | 1997年第4期
- Composites;
- Warp-knitting;
- Drapability;
- Polylpropylene matrix;
- Glass fibers;
- Split film;
- Thermoplastic manufacturing;
- Fast processing;
- Heat transfer;
- Fem calculation;
68.Recent Composites Publications Three Recent Publications on Composites Noted

机译：最新的复合材料出版物记录了三本有关复合材料的近期出版物
- 作者：J.N.Reddy;J.N.Reddy;D.V.Rosato
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
- 复合材料层片;
- 层片复合材料板力学;
- 增强复合材料设计;
69.Effect of Fiber Fracture and Matrix Yielding on Load Sharing in Continuous Fiber Metal Matrix Composites

机译：纤维断裂和基体屈服对连续纤维金属基复合材料负载分担的影响
- 作者：S.R.Voleti
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第4期
- load sharing;
- matrix yielding;
- MMCs;
- 载荷分配;
- 基体屈服;
- 金属基体复合材料;
70.Tension-Torsion Behavior of Glass Epoxy Flexbeam Laminates

机译：玻璃环氧柔性梁层压板的拉伸-拉伸行为
- 作者：T.K.OBrien
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第4期
- glass epoxy;
- fatigue;
- 玻璃环氧树脂;
- 疲劳;
71.Fracture Load Predictions for Adhesive Joints Under Mixed Mode I-II-III Loading

机译：I-II-III混合模式下胶接接头的断裂载荷预测
- 作者：I.Vintilescu
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第3期
- fracture;
- adhesive joints;
- mixed-mode;
- Mode I;
- Mode II;
- Mode III;
- energy release rate;
- split cantilever beam;
- 断裂;
- 粘结接头;
- 混合模型;
- 能量释放速率;
72.Technical Brief U.S.Army Research Lab Announces CIRTM

机译：美国陆军研究实验室技术简介宣布CIRTM
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
- 共喷射树脂传递模塑性;
- 试验室;
- 美国;
73.Composties Contents Listing of current literature of interest to the composites community as a service to our readers.

机译：复合材料目录复合材料社区感兴趣的当前文献清单，作为对我们读者的服务。
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第4期
- 复合材料研究;
- 文献目录;
74.Residual Thermal Stresses in Metallic and Intermetallic Matrix Composites After Cooling from Processing Temperature

机译：从加工温度冷却后，金属和金属间基复合材料的残余热应力
- 作者：A.Abedian
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第3期
- finite element method (FEM);
- composite material;
- thermal residual stress;
- plastic deformation;
- micromechanics;
- 有限元法;
- 复合材料;
- 热残留应力;
75.Journal of Composites Technology & Research Table of Contents Volume 20, 1998

机译：复合材料技术与研究学报目录1998年第20卷
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第4期
- 复合材料论文;
- 题录名称;
76.Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams6

机译：循环荷载对埋入混凝土梁中的GFRP杆粘结性能的影响6
- 作者：C.E.Bakis
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
- bond;
- cyclic loading;
- FRP reinforcement;
- reinforced concrete;
- RILEM beams;
- residual bond strength;
- 结合;
- 循环载荷;
- 玻璃纤维;
- 增强塑料;
77.ASTM Committee D-30 Best Presentation Award

机译：ASTM委员会D-30最佳演讲奖
- 作者：M.K.Cvitkovich
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第4期
- 复合材料;
- 最佳论文奖;
- 美国ASTM协会;
78.Composites Contents Listing of current literature of interest to the composites community as a service to our readers

机译：复合材料目录复合材料社区当前感兴趣的文献清单，为读者提供服务
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第2期
- 文献目录;
- 复合材料;
79.Journal of Composites Technology & Research Author Index Volume 20, 1998

机译：复合材料技术与研究学报作者索引1998年第20卷
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第4期
- 复合材料技术和研究杂志;
- 作者索引;
80.Calendar on Composites The following meetings may be of interest to researchers in the field of composite materials.

机译：复合材料日历以下会议可能是复合材料领域的研究人员感兴趣的。
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第3期
- 复合材料;
- 国际会议;
- 内容和日期;
81.Mixed mode I, II, and III fracture characterization of adhesive joints

机译：胶接点的混合模式I，II和III断裂特性
- 作者：Vintilescu I.;Spelt J.
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第2期
- Fracture;
- Adhesive joints;
- Mixed-mode;
- Mode i;
- Mode ii;
- Mode iii;
- Energy release rate;
- Split cantilever beam;
- Load;
82.Effect of Interfacial Properties on the Fiber Fragmentation

机译：界面性质对纤维破碎的影响
- 作者：S.R.Voleti
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
- fiber fragmentation test;
- polymer matrix composites;
- shear-lag theory;
- interface;
- debonding;
- friction;
- 纤维碎化试验;
- 聚合基体复合材料;
- 界面;
83.Dependence of Intralaminar Fracture Toughness on Direction of Crack Propagation in Unidirectional Composites

机译：腹腔内骨折韧度对单向复合材料裂纹扩展方向的影响
- 作者：U.Hansen
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第2期
- composite materials;
- fracture toughness;
- orthotropy;
- R-curve;
- crack-tip geometry;
- 复合材料;
- 断裂韧性;
- 裂纹端部几何形状;
84.Strength Reduction and Damage Characterization of SCS6/Ti-6Al-4V Composite Exposed to Fatigue at Elevated Temperature

机译：高温下SCS6 / Ti-6Al-4V复合材料的强度降低和损伤表征
- 作者：K.K.Robertson
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第2期
- titanium matrix composites;
- metal matrix composites;
- fatigue;
- residual strength;
- fatigue life;
- tensile loading;
- damage mechanisms;
- 钛基体复合材料;
- 疲劳;
- 残余强度;
85.Viscoelastic Creep Characteristics of Neat Thermosets and Thermosets Reinforced with E-Glass4

机译：整洁热固性塑料和电子玻璃增强的热固性塑料的粘弹性蠕变特性4
- 作者：S.W.Bradley
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
- polymeric composites;
- vinyl ester;
- polyester;
- postcure;
- E-glass;
- glass transition temperature;
- 聚合复合材料;
- 玻璃转变温度;
- 乙烯基醋;
86.An investigation into the fatigue of a hybrid titanium composite laminate

机译：杂化钛复合材料层压板疲劳研究
- 作者：Li E.;Johnson WS.
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
- Hybrid composite laminate;
- Titanium;
- Fatigue;
- Damage tolerant;
- Elevated temperature;
87.Additional Information for Authors

机译：作者的附加信息
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第3期
- 复合材料;
- 信息;
88.Accelerated Ttest Methods to Determine the Long-Term Behavior of Composite Highway Structures Subject to Environmental Loading5

机译：确定环境荷载作用下复合公路结构长期行为的加速试验方法5
- 作者：T.R.Gentry
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
- composites;
- accelerated testing;
- aging;
- degradation;
- polymer;
- fiber-reinforced plastics thermogravimetric analysis;
- pultrusion;
- polyester;
- vinylester;
- 复合材料;
- 加速试验;
- 时效;
89.Additional Information for Authors

机译：作者的附加信息
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第4期
- 复合材料研究领域;
- 信息;
- 作者;
90.An Investigation into Fatigue of a Hybrid Titanium Composite Laminate

机译：混杂钛复合层合板的疲劳研究。
- 作者：E.Li
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
- hybrid composite laminate;
- titanium;
- fatigue;
- damage tolerant;
- elevated temperature;
- 混合复合材料层片;
- 钛;
- 疲劳;
91.Mixed Mode 1,11,and 111,Fracture Characterization of Adhesive Joints

机译：1,11和111混合模式的胶接点断裂特征
- 作者：I.Vintilescu
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第2期
- fracture;
- adhesive joints;
- mixed-mode;
- Mode I;
- Mode II;
- Mode III;
- energy release rate;
- split cantilever beam;
- 断裂;
- 粘合接头;
- 能量释放速率;
92.Inclined Double Notch Shear Test for Improved Interlaminar Shear Strength Measurements

机译：倾斜双缺口剪切试验，用于改进层间剪切强度测量
- 作者：M.Jonas
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第2期
93.Calendar on Composites The following meetings may be of interest researchers in the field of composite materials

机译：复合材料日历以下会议可能是复合材料领域的研究人员感兴趣的会议
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第2期
- 复合材料会议;
- 名称;
- 日期;
94.Sensitivity of Mechanical Properties to Braid Misalignment in Triaxial Braid Composite Panels

机译：机械性能对三轴编织复合板中编织未对准的敏感性
- 作者：J.Chen
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
95.The Effect of Biofouling on Graphite/Epoxy Composites3

机译：生物污垢对石墨/环氧树脂复合材料的影响3
- 作者：J.S.Pub
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
96.Calendar on Composites The following meetings may be of interest to researchers in the field of composite materials.

机译：复合材料日历以下会议可能是复合材料领域的研究人员感兴趣的。
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第4期
- 复合材料;
- 国际会议;
- 内容和日期;
97.Micromechanics Analysis and Life Prediction of Titanium Matrix Composites

机译：钛基复合材料的微力学分析和寿命预测
- 作者：T.Nicholas
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第2期
98.A Finite Element and Experimental Evaluation of Boron-Epoxy Doublers Bonded to an Aluminum Substrate

机译：铝基硼键合双键的有限元及实验评价
- 作者：R.V.Valentin
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第2期
99.Eighth Japan-U.S.Conference on Composite Materials

机译：第八届日美复合材料会议
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第1期
- 复合材料系统;
- 复合材料合成;
- 高温材料;
100.Net-Spape Machining and the Process-Dependent Failure of Fiber-Reinforced Plastics Under Static Loads

机译：Net-Spape加工和纤维增强塑料在静态载荷下的过程相关故障
- 作者：D. D. Arola
- 期刊名称：《Journal of Composites Technology & Research》 | 1998年第4期
- composites;
- machining;
- surface texture;
- surface integrity;
- 复合材料;
- 机械加工;
- 表面组织;

客服邮箱：kefu@zhangqiaokeyan.com

客服微信
服务号